Laboratory and Research Supplies And Equipment Tenders

LAB EQUIPMENT for students

36 Item-36 DENTAL UNIT WITH MOTOR FOR DENTAL OPD. Examination/treatmentchairsdesignedtofacilitatedental examination,treatment,and/orminorsurgicalprocedures. Thesechairs are typically adjustable up to a height that allows the healthcare staff to perform procedures while standing; the chairsusually include head and armrests, a reclining back that may be tilted from a vertical to a horizontal or near-horizontal position, and rotating capabilitiestofacilitateexaminationand/ortreatment.Technical characteristics (specifictothistypeof device) It should have double articulating headrest with seesawmovement. Itshouldbeprovidedwithsoftcervicalsupport. Dental unit should have latest overhead delivery system. It should have two 3 way syringes (Tip autoclavable, with spare tips) one on unit side and other on the assistant side. It should have two high speed Air rotor terminals with tworotorhandpiecesandaccessoriesandoneterminal for fiber optic. One for air motor/micro motor having straight and contra angle hand pieces and other for air rotor terminal with two air rotorhand pieces with two sparecartridges. ItshouldhaveLEDlightcureunitwithminimumintensity 1200 mW/cm2. It should have infection control system with non- retraction valves (Bio system/equivalent). Allhandpieces/terminals shouldbekept onAutoclavable pads.8 spare autoclavable pads should be supplied. Armofunitshouldbepneumaticallylocked. Allair tubingofthedeliverysystemcanbedisinfected internallyafter every dental procedure. Itshouldhaveoneinbuiltpiezoultrasonicscalar(max frequencyshould be 36 kHz) Removableauxiliarytray(autoclavable)shallbe supplied–10sets. It should have integrated latest foot operated LED light (30000 - 50000 Lux). It should have rotatablewater system with removable spittoon. It should have Medium Vacuum Suction and high suction(MotorizedSuction). Shouldhavefollowingmultipleprogram Twoprogrammableworkingpositions. SplittingandlastworkingpositionwithlightON and OFFautomatically. Return to Zero position with light OFF automatically. Itshouldhaveemergencystopcontrolwith luminousindication. Programmablebowlwaterandcupfillerwater. ItshouldhaveLEDbasedX-rayviewer(For I.P.G/O.P.G films). Itshouldbeprovided with rightarm. It shouldhavemulti-functionalfootcontrolbase. Itshouldbeprovidedwithtwostoolswithadjustable backresttiltincludinganadjustableringforfootrest Oil free medical grade compressor of 1HP (fully imported)220+/-10%VAC, 50Hz No Stabilizerorinbuiltprotectiontovoltagefluctuation/current surge. Tobespecifiedbyvendor. 5.ACCESSORIES,SPAREPARTS,CONSUMABLES LEDLIGHTCAREUNIT: Ensuresupto1200mW/sq.cm ULTRASONICSCALAR: PiezotronicsScalarwithfrequencyof28000-36000Hz Autoclavablehandpiece,TotalcontrolisMicroprocessor based HandPiecesmostsleek. The scalar supplies with: Piezotronics scalar with 4 tips. FOOTOPERATEDLIGHT: LEDlight with3intensitywith3axis movement. Intensityisbetween30000-50000Lux On/offSwitchbysensorswitch-nontouch. Stepintensitycontrolbynon-touchsensor. AIRROTOR: AirRotorhand Each 1.00 416576.16 416576

36 Item-36 DENTAL UNIT WITH MOTOR FOR DENTAL OPD. Examination/treatmentchairsdesignedtofacilitatedental examination,treatment,and/orminorsurgicalprocedures. Thesechairs are typically adjustable up to a height that allows the healthcare staff to perform procedures while standing; the chairsusually include head and armrests, a reclining back that may be tilted from a vertical to a horizontal or near-horizontal position, and rotating capabilitiestofacilitateexaminationand/ortreatment.Technical characteristics (specifictothistypeof device) It should have double articulating headrest with seesawmovement. Itshouldbeprovidedwithsoftcervicalsupport. Dental unit should have latest overhead delivery system. It should have two 3 way syringes (Tip autoclavable, with spare tips) one on unit side and other on the assistant side. It should have two high speed Air rotor terminals with tworotorhandpiecesandaccessoriesandoneterminal for fiber optic. One for air motor/micro motor having straight and contra angle hand pieces and other for air rotor terminal with two air rotorhand pieces with two sparecartridges. ItshouldhaveLEDlightcureunitwithminimumintensity 1200 mW/cm2. It should have infection control system with non- retraction valves (Bio system/equivalent). Allhandpieces/terminals shouldbekept onAutoclavable pads.8 spare autoclavable pads should be supplied. Armofunitshouldbepneumaticallylocked. Allair tubingofthedeliverysystemcanbedisinfected internallyafter every dental procedure. Itshouldhaveoneinbuiltpiezoultrasonicscalar(max frequencyshould be 36 kHz) Removableauxiliarytray(autoclavable)shallbe supplied–10sets. It should have integrated latest foot operated LED light (30000 - 50000 Lux). It should have rotatablewater system with removable spittoon. It should have Medium Vacuum Suction and high suction(MotorizedSuction). Shouldhavefollowingmultipleprogram Twoprogrammableworkingpositions. SplittingandlastworkingpositionwithlightON and OFFautomatically. Return to Zero position with light OFF automatically. Itshouldhaveemergencystopcontrolwith luminousindication. Programmablebowlwaterandcupfillerwater. ItshouldhaveLEDbasedX-rayviewer(For I.P.G/O.P.G films). Itshouldbeprovided with rightarm. It shouldhavemulti-functionalfootcontrolbase. Itshouldbeprovidedwithtwostoolswithadjustable backresttiltincludinganadjustableringforfootrest Oil free medical grade compressor of 1HP (fully imported)220+/-10%VAC, 50Hz No Stabilizerorinbuiltprotectiontovoltagefluctuation/current surge. Tobespecifiedbyvendor. 5.ACCESSORIES,SPAREPARTS,CONSUMABLES LEDLIGHTCAREUNIT: Ensuresupto1200mW/sq.cm ULTRASONICSCALAR: PiezotronicsScalarwithfrequencyof28000-36000Hz Autoclavablehandpiece,TotalcontrolisMicroprocessor based HandPiecesmostsleek. The scalar supplies with: Piezotronics scalar with 4 tips. FOOTOPERATEDLIGHT: LEDlight with3intensitywith3axis movement. Intensityisbetween30000-50000Lux On/offSwitchbysensorswitch-nontouch. Stepintensitycontrolbynon-touchsensor. AIRROTOR: AirRotorhand Each 1.00 416576.16 416576

36 Item-36 DENTAL UNIT WITH MOTOR FOR DENTAL OPD. Examination/treatmentchairsdesignedtofacilitatedental examination,treatment,and/orminorsurgicalprocedures. Thesechairs are typically adjustable up to a height that allows the healthcare staff to perform procedures while standing; the chairsusually include head and armrests, a reclining back that may be tilted from a vertical to a horizontal or near-horizontal position, and rotating capabilitiestofacilitateexaminationand/ortreatment.Technical characteristics (specifictothistypeof device) It should have double articulating headrest with seesawmovement. Itshouldbeprovidedwithsoftcervicalsupport. Dental unit should have latest overhead delivery system. It should have two 3 way syringes (Tip autoclavable, with spare tips) one on unit side and other on the assistant side. It should have two high speed Air rotor terminals with tworotorhandpiecesandaccessoriesandoneterminal for fiber optic. One for air motor/micro motor having straight and contra angle hand pieces and other for air rotor terminal with two air rotorhand pieces with two sparecartridges. ItshouldhaveLEDlightcureunitwithminimumintensity 1200 mW/cm2. It should have infection control system with non- retraction valves (Bio system/equivalent). Allhandpieces/terminals shouldbekept onAutoclavable pads.8 spare autoclavable pads should be supplied. Armofunitshouldbepneumaticallylocked. Allair tubingofthedeliverysystemcanbedisinfected internallyafter every dental procedure. Itshouldhaveoneinbuiltpiezoultrasonicscalar(max frequencyshould be 36 kHz) Removableauxiliarytray(autoclavable)shallbe supplied–10sets. It should have integrated latest foot operated LED light (30000 - 50000 Lux). It should have rotatablewater system with removable spittoon. It should have Medium Vacuum Suction and high suction(MotorizedSuction). Shouldhavefollowingmultipleprogram Twoprogrammableworkingpositions. SplittingandlastworkingpositionwithlightON and OFFautomatically. Return to Zero position with light OFF automatically. Itshouldhaveemergencystopcontrolwith luminousindication. Programmablebowlwaterandcupfillerwater. ItshouldhaveLEDbasedX-rayviewer(For I.P.G/O.P.G films). Itshouldbeprovided with rightarm. It shouldhavemulti-functionalfootcontrolbase. Itshouldbeprovidedwithtwostoolswithadjustable backresttiltincludinganadjustableringforfootrest Oil free medical grade compressor of 1HP (fully imported)220+/-10%VAC, 50Hz No Stabilizerorinbuiltprotectiontovoltagefluctuation/current surge. Tobespecifiedbyvendor. 5.ACCESSORIES,SPAREPARTS,CONSUMABLES LEDLIGHTCAREUNIT: Ensuresupto1200mW/sq.cm ULTRASONICSCALAR: PiezotronicsScalarwithfrequencyof28000-36000Hz Autoclavablehandpiece,TotalcontrolisMicroprocessor based HandPiecesmostsleek. The scalar supplies with: Piezotronics scalar with 4 tips. FOOTOPERATEDLIGHT: LEDlight with3intensitywith3axis movement. Intensityisbetween30000-50000Lux On/offSwitchbysensorswitch-nontouch. Stepintensitycontrolbynon-touchsensor. AIRROTOR: AirRotorhand Each 1.00 416576.16 416576

36 Item-36 DENTAL UNIT WITH MOTOR FOR DENTAL OPD. Examination/treatmentchairsdesignedtofacilitatedental examination,treatment,and/orminorsurgicalprocedures. Thesechairs are typically adjustable up to a height that allows the healthcare staff to perform procedures while standing; the chairsusually include head and armrests, a reclining back that may be tilted from a vertical to a horizontal or near-horizontal position, and rotating capabilitiestofacilitateexaminationand/ortreatment.Technical characteristics (specifictothistypeof device) It should have double articulating headrest with seesawmovement. Itshouldbeprovidedwithsoftcervicalsupport. Dental unit should have latest overhead delivery system. It should have two 3 way syringes (Tip autoclavable, with spare tips) one on unit side and other on the assistant side. It should have two high speed Air rotor terminals with tworotorhandpiecesandaccessoriesandoneterminal for fiber optic. One for air motor/micro motor having straight and contra angle hand pieces and other for air rotor terminal with two air rotorhand pieces with two sparecartridges. ItshouldhaveLEDlightcureunitwithminimumintensity 1200 mW/cm2. It should have infection control system with non- retraction valves (Bio system/equivalent). Allhandpieces/terminals shouldbekept onAutoclavable pads.8 spare autoclavable pads should be supplied. Armofunitshouldbepneumaticallylocked. Allair tubingofthedeliverysystemcanbedisinfected internallyafter every dental procedure. Itshouldhaveoneinbuiltpiezoultrasonicscalar(max frequencyshould be 36 kHz) Removableauxiliarytray(autoclavable)shallbe supplied–10sets. It should have integrated latest foot operated LED light (30000 - 50000 Lux). It should have rotatablewater system with removable spittoon. It should have Medium Vacuum Suction and high suction(MotorizedSuction). Shouldhavefollowingmultipleprogram Twoprogrammableworkingpositions. SplittingandlastworkingpositionwithlightON and OFFautomatically. Return to Zero position with light OFF automatically. Itshouldhaveemergencystopcontrolwith luminousindication. Programmablebowlwaterandcupfillerwater. ItshouldhaveLEDbasedX-rayviewer(For I.P.G/O.P.G films). Itshouldbeprovided with rightarm. It shouldhavemulti-functionalfootcontrolbase. Itshouldbeprovidedwithtwostoolswithadjustable backresttiltincludinganadjustableringforfootrest Oil free medical grade compressor of 1HP (fully imported)220+/-10%VAC, 50Hz No Stabilizerorinbuiltprotectiontovoltagefluctuation/current surge. Tobespecifiedbyvendor. 5.ACCESSORIES,SPAREPARTS,CONSUMABLES LEDLIGHTCAREUNIT: Ensuresupto1200mW/sq.cm ULTRASONICSCALAR: PiezotronicsScalarwithfrequencyof28000-36000Hz Autoclavablehandpiece,TotalcontrolisMicroprocessor based HandPiecesmostsleek. The scalar supplies with: Piezotronics scalar with 4 tips. FOOTOPERATEDLIGHT: LEDlight with3intensitywith3axis movement. Intensityisbetween30000-50000Lux On/offSwitchbysensorswitch-nontouch. Stepintensitycontrolbynon-touchsensor. AIRROTOR: AirRotorhand Each 1.00 416576.16 416576