Loading
Loading…
Loading…
64 results • Latest
25 kV AC Electrification work for balance work of "Prayagraj Yard remodeling work (Sanctioned under umbrella work 2019-20) (P.B. Item No. 92 of 2019-20)
30b(iii) Erection of anti climbing device for AT Each Total 17031173.00 Item- 4 Non-Ferrous S No. Item Description of Item Unit Qty Rate Amount No
Annual Pump and Motor Maintainance Work for the year 2025-26/2026-27
Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes(Each length 6m) i) 50 mm (BWSSB SR 2017-18/O150A/Sl No.24)
REPAIR/MAINT OF 33KV NETWORK OTHER ALLIED WORKS INCLUDING IMPROVEMENT OF INFRASTURCTURE AND REPAIR/MAINT/ASSESSMENT CALIBRATION OF HT SWTICH GEARS AT SECTOR D, E AND F AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01
M&L in replacement of 33 KV rated horizontal mounting 400 / 600 Amp Gang operated Air break off load, disconnecting switch, Tripple pole, each pole consists of galvanized steel base, HT Insulators as per BSS./I.S non-ferrous knife and spring loaded contacts, arcing horns of adequate section to break magnetizing current of the transformers horizontal GI pipe of adequate lenghth for phase separation, adequate length of GI pipefor operation from ground level and operating handle complete in both OFF and ON position complete all as specified. conform to IS : 9385 complete all as specified and directed by Engineer-in-Charge.
BREATHER ASSEMBLY ENQUIRY ITEM 01 AND 02 FOR DETAILS REFER ATTACHED
BREATHER ASSY. TYPE-5(3 IN SERIES, WITHOUT SILICA GEL AS PER GENERALLY SIMILAR TO DRG NO.34995150018 REV 08. ALL THE PIPE CONNECTION TO ASSEMBLY THE BREATHER IN SERIES SHALL BE IN THE SCOPE OF SUPPLIER
CRIMPING LUG ENQUIRY ITEMS 01 TO 05 FOR DETAILS PLEASE REFER ATTACHED ENQUIRY AND TENDER DOCUMENT
CRIMPING LUG TO DRG TR25072T REV-09 SL NO 01 AND ST 626841.
Utility Electrical Poles shifting (33/11KV) Work on Chaksu to Badarwas, Old NH-12 To SH-02 Via Azamnagar, Kalyanpura, Kareda Khurd, SH-02 to Titriya vis Thali ,sardarpura, Devkisanpura, Kareda Khurd Japur
Supply and fixing of PG / T clamps on overhead lines/jumpers, made of aluminium alloy 4600 of IS 617-1994 (with latest amendment if any) with steel nut and bolts conforming to IS 1363-1992 & IS 1367/1979-80 (with latest amendments if any) all ferrous metal parts intended for outdoor use except those made of stainless steel shall be protected by hotdip galvanising in accordance with IS 2633-1986 complete in all respect as required.