Miscellaneous Component Tenders

competent to sign on behalf of bidder on each page as a token of unconditional acceptance to the conditions of various

1 Submission of Tenders and Access to CPP Portal. The Chief General Manager, Ammunition Fcatory Khadki (A Unit of Munitions India Limited, Pune) invites sealed quotations in electronic form under the two bid system (technical/eligibility bid and price bid) for the Civil Work/Electrical work (the detail is available on website https://etenders.gov.in Interested contractors fulfilling the eligibility criteria to submit e-offer online in the website. Only electronic submission of offer in this website will be valid. The copies of the Documents including EMD sought shall be attached as scanned copies in e-procurement system. All corrigendums will be available in this web site only. New vendors are requested to obtain class III Digital Signature Certificate (DSC) with the company name from any certifying authority licensed by controller of certifying authority. The vendors are also required to get themselves enrolled on CPP Portal e-procurement website by using the DSC, as per instruction available on the website. Vendors should also have valid email address on this website. The DSC for both component (Signing and Encryption) is required to access the CPP Portal e-procurement website.) SELECT

Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2-2004 of white glazed with 'S' trap including supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS2548-1996 along with supplying & fixing low-down porcelain flushing tank with lid 10 Lit Capacity with internal components including supplying & fixing of 15 mm nominal size PVC connection with brass union nut C.P coated, 15 mm nominal size brass concealed stop valve screw type with internal /external threaded conforming to IS 8931 and CP short bend and all other required accessories including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work as directed by the Engineer in Charge for all floors.

C-07-LIFT OPD BLOCK Design, fabrication, supply of electric traction type with machine roomless type, Stainless steel 15 Passenger (1020Kg) elevator (including freight & landing charges ,insurance and all applicable taxes and duties in country of origin and in India etc.without GST) and type suitable for operation on 415 V ± 10%, 3 phase , 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1 Mtr/sec ,electromagnetic brake system, Duplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries,Safe landing device and Battery Operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with prerecorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE3 or better efficiency) of machine roomless elevator shall be of gearles type and placed inside the elevator hoistway complete as per technical specification. Having automatic side opening Stainless steel Hairline AISI441 door, stainless steel car enclosure provided with stainless steel handrails on two sides as applicable in accordance of following details:2 stops & 2 openings and entrance & exit at same side and suitable for travel height of 4 mtrs. (Shaft Size 2000mm (width) x 3000mm (depth) ) with car opening of 1000mm (width) and 2200 mm (height)2400 mm deep . complying with the net inside car area as per IS14665 part 3/1) Car design Stainless Steel - Milkyway and door opening of 900mm (width) and 2100mm (height). The equipment should be BMS compatible and shall haveprovision for CCTV installation . All electrical components with wiring from the single point power supply provided in last landing near the elevator door. All fabrication and procedures shall confirm to relevant IS ,Yes Gong in Car Emergency Rescue Device with audio announcer 2 Way Dedicated Intercom Attendant Service Lift Announcer Round spot LED light Interface only B, 2 Hours Fire rated standards and complete in all respects as per technical specifications

& composite for use behind abutments, wing walls, return walls and Retaining walls Geocomposite drain (Vertical) as per RDSO Specification No. RDSO/2018/GE:IRS-0006 latest version with all material, labour, equipment, tools and plants, lead, lift etc. complete in all respects as per the direction of Engineer-in-Charge. Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge. Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines.