Over Burden Removal works Tenders

Forming embankment with borrowed useful earth from outside road boundary by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P , complete for finished item of work as per MoRT&H specification 305 (5th revision)

10000884 Labour for drilling a perfectly vertical bore hole of specified dia. for a desired depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition including use of own rigs with its accessories, tools and plant and consumables etc. so as to the finished bore is suitable for lowering of 200 mm dia. GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lowering and withdrawing of casing pipe after drilling 200 mm to 450 mm dia. in over burden portion complete .(FROM 0-100 MTR) Ground Floor

(i) And of the pages of the tender is/are removed or replaced.

Supply, installation, testing and commissioning in replacement of outdoor type oil cooled single phase Current Transformer (CT) with double wound, dual ratio C.T.'s 100-50A/5-5A suitable for 33 KV 3 phase system 15 VA burden for protection (class 5P10) 15 VA burden for metering (accuracy class 1) as per IS: 2705-1992 complete with necessary connections etc as required complete all as specified and directed by Engineer-in-Charge.

removal of all temporary works of whatsoever nature required for construction including temporary

Designing ,supplying, installing, testing and commissioning of tape-wound, Current Transformers (CTs) of the following ratings for three-phase application, Class 1, burden 5 VA, standard inner diameter (ID – STD) for existing busbar/conductor size, conforming to relevant standards, suitable for mounting in existing LT panels by carrying out necessary minor fabrication/modification works for proper placement and securing of CTs; including providing all required accessories and making proper terminations to the existing control wiring, complete as required. CT test reports issued by KSEB, ULCCS, or any equivalent accredited test centre is to be submitted. Site visit is recommended.