Painting Works Tenders

Supplying of channel iron 75mm x 40mm x 6mm (7.14 Kg per meter) cross arm for 2 wire over head line complete with clamps, bolts nuts and washer etc including drilling of holes for insulator pins, etc (as per drawing) and painting with primer and finish paint as required. 25sets + 6sets (for cradle guard- 3span) = 31sets)

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two coats on new work including preparing the surface after thorougly cleaning oil, grease, ...

slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 12.0 ROOFING 12.1S SHEET ROOFING 12.14 Providing flat iron brackets 50x3 mm size with Metre 120 92.4 11088 21 necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins. 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement 12.38 concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 22 12.38.2 150 mm diameter Each 40 395.6 15824 LUMDING DIVISION-ENGINEERING/N F RLY Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry 12.40 surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): 12.40.1 Sand cast iron plain shoes : 23 12.40.1.1 150 mm diameter Each 30 511.9 15357 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring 12.41 conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 24 12.41.2 110 mm diameter Metre 500 377.4 188700 12.50 Providing and fixing precoated galvanised iron Sqm 500 738.65 369325 profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have 25 protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 grams per 12.51 sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 26 12.51.1 Ridges plain (500 - 600mm) Metre 35 532.35 18632.25 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 27 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 500 347.05 173525 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 1000 170.7 170700 Paint to give an even shade. Two or more coat 28 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Painting with aluminium paint of approved 13.63 brand and manufacture to give an even shade . 29 13.63.1 Two or more coats on new work Sqm 500 146.8 73400 15.0 DISMANTLING AND DEMOLISHING 15.1S General LUMDING DIVISION-ENGINEERING/N F RLY Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix cum 10 2434.25 24342.5 30 (including equivalent design mix) Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 31 15.7.4 In cement mortar cum 20 2060.2 41204 15.56 Dismantling old plaster or skirting raking out Sqm 250 54.65 13662.5 joints and cleaning the surface for plaster 32 including disposal of rubbish to the dumping ground within 50 metres lead. 16.0 ROAD WORK 16.49S MISCELLANEOUS Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road 16.86 side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 33 16.86.1 With granite stone of area less than 0.50 sqm. Sqm 240 4746.2 1139088 16.90 Providing and laying tactile tile (for vision Sqm 200 2017.6 403520 impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, 34 multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing soil, waste and vent pipes 17.35 : 17.35.1 100 mm dia 17.35.1.2 Centrifugally cast (spun) iron socket & spigot Metre 10 1180.75 11807.5 35 (S&S) pipe as per IS: 3989 17.35.2 75 mm diameter : 17.35.2.2 Centrifugally cast (spun) iron socketed pipe as Metre 10 1186 11860 36 per IS: 3989 Providing and fixing plain bend of required 17.39 degree. 17.39.1 100 mm dia 17.39.1.3 Hubless centrifugally cast (spun) i r o n pipes Each 5 368 1840 37 epoxy coated inside & outside IS:15905 Providing and fixing single equal plain junction of required degree with access door, insertion 17.43 rubber washer 3 mm thick, bolts and nuts complete. 17.43.1 100x100x100 mm LUMDING DIVISION-ENGINEERING/N F RLY 38 17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 5 925.7 4628.5 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal 18.6 stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work 39 18.6.3 PN - 16 Pipe, 32 mm OD (SDR-7.4) Metre 600 316.25 189750 40 18.6.4 PN - 16 Pipe, 40 mm OD (SDR-7.4) Metre 500 415.1 207550 41 18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) Metre 500 450.95 225475 Total 33123144.48