Loading
Loading…
Loading…
10,489 results • Best match
A/R and M/O to various roads under Division south west road II during 2026-27 (SH Repair/Re-laying of damaged C.C. road pavement and repair of existing grill and other misc. work under the bijwasan flyover and Repair and Restoration of roof and door
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 6.1) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Rectification of monsoon damage.
Premonsoon work
Construction of a Toilet Block and 6 Nos. Highway Nest Mini at Toll Plazas in the State of Tamil Nadu under the Jurisdiction of PIU Karaikudi on an Item Rate Basis.
Providing and fixing of retro-reflectorised direction and place identification sign of area exceeding 0.9 sqm as per clause 801 of MORTH Specifications for Roads & Bridge Works (5th Revision) and IRC: 67 made of class -C Micro Prismatic Grade Sheeting of Type XI retro reflective sheeting. The retro-reflective sheeting shall have manufacturer logo, watermark and lot number on the sheet. A QR (Bar) code shall also be placed on the backside of the sign board with an indelible ink. Retro reflective sheet shall be fixed over 2 mm thick aluminium sheeting or 4mm thick Aluminium composite material sheet vide clause 801 of MoRTH Specifications for Roads & Bridge Works. The sign shall be fixed over back support frame of minimum 40x40x 5mm Angle Frame. Retro-reflective sheet shall be fixed on substrate with Pressure Adhesive. The substrate shall be firmly riveted on angle frame @200mm spacing with aluminium pop rivets using Pneumatic guns. The Angle frame shall be firmly fixed with high strength Bolts, washers & nuts conforming to IS1364 and IS 1367 on Sign Support Pole. Signs shall be supported on two or more Gl circular pipe 80 NB, 3.2 mm thickness confirming to IS 1239. Adequate bracing shall be provided to hold firmly GI support pipes. The sign supports shall be firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60, 60 cm below ground level as per approved drawling. All Components of signs and supports including angle frame, bolts, nuts, washers, etc., other than the reflective portion shall be galvanized by hot dip process (Zinc coated, 0.55 kg/sqm; minimum single spot) unless otherwise specified. All galvanizing shall be done after fabrication. Altemate white and yellow bands measuring 50 mm long retro-reflective sheeting shall be pasted around Gl posts which help in ensuring the visibility/Presence of poles during night time even if the sign boards are stolen or totally vandalized. Minimum four bands of such retro-reflective sheeting shall be pasted starting from a height of 0.5 m above the finish road level. The messages (legends, letters, numerals, etc.) and borders shall be digitally printed confirming to clause 6.8 of IRC 67. Finished Signs shall have an Ultra Violet (UV) protective clear overlay applied to the entire face of the signs supplied by reflective sheet manufacturer. The agency shall submit 10 years warranty for satisfactory field performance for type X retro reflective sheeting from the manufacturer conforming to clause 6.7 & 6.9 of IRC 67. Agency shall submit a certified copy of Govemment test reports from laboratory/Institute conforming to clause 6.7 & 6.9 of IRC 67 including 3 years accelerated outdoor weathering for the retro reflective sheeting. The Agency shall submit the sign convertor (manufacturer) name with essential equipment in his fabrication shop such as digital printer, cutter, plotter, laminator, Galvantzing plant etc. The išgency shall submit road sign installation drawing in Kmz file for approval before Installation and after installation submit geo-tagging of all road signs with its installation photos and date of installation and other detalls as mentioned In IRC 67 annexure VII, complete in all respects. The sign supports and its foundation detalls are indicative. These may be Increased for areas having higher wind Nelocities like in coastal areas. This is applicable to all road signs and directions boards. (Board of size 1.20 m x 0.90 m)
REPAIR WORK OF ROAD DAMAGED DURING LAYING OF WATER PIPELINES AT MOHANBARI, ANANDBARI, DESHBHUSHAN NAGAR, LAXMINARAYANPURI, TALAI CHOWK, CHANDA MARKET, PAHADIA CHOWK, MALIYON KA MOHALLA AND OTHER PLACES IN ADARSH NAGAR ZONE.
Providing and constructing of RR stone masonry circular manholes of "Type-A" with internal dia 0.90m and depth upto 1.65m having 300mm thick RR stone masonry wall in cement sand mortar 1:4, including concreting PCC M-10 grade (1:4:8) for 225mm thick foundation including curing compaction and form work etc complete, PCC M15 for benching and channel portion, RCC M20 for 200mm thick cover slab including reinforcement, PCC M20 for fixing the manhole frame and cover using stone aggregate 20mm nominal size, 20mm thick inside and outside plaster in C. M. 1:3, inside plaster finished with floating coat of neat cement, vata in CM1:1 around pipe entering and leaving the manhole and also at the junction of masonry and concrete slab, providing and fixing of SFRC foot steps of approved make at every 0.30m height fixed in CM 1:3, supplying and fixing heavy duty SFRC manhole frame and cover as per IS 12592 (Part I and II) having clear opening of 560mm, including refilling of Jhiri, including curing, watering, ramming, hydro testing of manhole, conveyance & cost of water, and dewatering complete as directed by the Engineer. Note:- Excavation of earth work and road cutting for manhole will be measured and paid separately. Manhole "Type-A" of depth 0.90 m
Rep.of 1000 MT Godown No.2 with Retail Counter Shops, Office Room And Const.of CC Road And Toilet Block (m/f) at Alirajpur Distt. Alirajpur, Rep. work of 2000MT Godown of Markfed at Depalpur Takipura Distt.-Indore (1st Call)
Repairing work of 1000 MT Godown No. 02 with Retail Counter Shops & Office Room And Construction work of CC Road And Toilet Block (male /Female) of Markfed at Alirajpur Distt. Alirajpur, Repairing work of 2000 MT Godown of Markfed at Depalpur Takipura Distt.- Indore (1st Call)
Control room building extension of (02 Span) with electrification, Renovation of existing building,Yard PCC, Metal Spreading, GP2 Grouting, RCC Road & other misc civil works at 66KV Narali S/S, under Dhrangadhra AM Division of Surendranagar Circle.
building,Yard PCC, Metal Spreading, GP2 Grouting, RCC Road & other misc civil works at 66KV Narali S/S,