Loading…
Loading…
1,45,642 results • Best match
New Construction work of PTA Sujanpur Road to Rustgarh via Nagla Karan Singh Road
eProcurement System Government of Uttar Pradesh Created By: Yogesh Kumar Created Date/Time: 16-Mar-2026 05:28 PM Tender Title: New Construction work of PTA Sujanpur Road to Rustgarh via Nagla Karan Singh Road Tender ID: 2026_CEALG_1111288_1
CC road construction work from Pawta Road to Munshi Mistri house Ward No. 25
Providing and laying un-reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar,tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-25
Construction work of CC road from Gram Panchayat Malp Pitch Road to Anil house
Construction of plain Cement concrete pavements thickness 15 cm , over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30(Grade) coarse sand fine aggregates conforming to IS .383.Maximum size of coarse aggregates not exceeding 25mm. mixed in a concrete not exceeding 25mm. mixed in a concrete mixer of not less than 0.1 cum. capacity and appropriate weight batcher using approved mxi design . laid in approved fixed side formwork & 125 micron thikness polythene film including levelling the formwork as per drawing spreading the concrete with sholvels rackes compated using meedle,screed and plate vibrater and finishing in continuous operation including provision of construction and expension curing of concrete slabs for 14 days curing compound and water finishing to lines and grade as per drawing and Technical specification clause 1501.
New Construction work of BA road to Ayush Hospital (Gehna Goverdhan) missing link road
Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 (M 30 Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Claus1501 Including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.
Interlock road construction work from Main Road to Bhagwanaram and Lichmanaram Dhani Dhana Bhakran
New Construction work of Durvasa Shamsan Ghat Pitch Road to Kothawa Gaon Tak Road
Granular sub-base with well graded material (400.1) By Mix in Place Method (for Grading-1 material) Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Excluding G.S.T.)