Loading…
Loading…
1,197 results • Latest
SPECIAL REPAIRS TO BLDG NO P- 151(QTR NO. 1 TO 4) AT NANDAMBAKKAM UNDER GE STM CHENNAI
All as per item No.119 herein before but with 4 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board complete all as specified and as directed.
Construction of Multipurpose Hall in Plus 2 High School, Panchayat-Pakuria,(B-Pakuria)
Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
Construction of Multipurpose Hall in K.G.B.V. Pakuria, Panchayat- Bichpahari,(Block-Pakuria)
Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
REPAIR/MAINT OF EOT CRANE/PASSENGER LIFT UNDER GE DRONACHAL
Comprehensive, preventive and periodical maintenance of Lifts (04 Nos) by OEM Elevator India pvt Limited) of 8 passengers (544 Kg) /500 Kg goods lift - 04 Nos (details mentioned as under) each with travelling speed of 1.0 metre/sec to 1.5 metre/sec installed at 21 corps main Building Under GE Dronachal having SS car enclosure, microprocessor controlled with VVF drive, simplex dual controlled operation, with/ without attendant,automatic sliding SS doors, automatic rescue device including maintenance free battery, 3D infra-red sensor to the full height of door, built in announcing system , in reliable, safe, technical sound and efficient manner using latest techniques & expertise consultancy (by OEM manufacturer or their authorised agent); by regularly examining lubricating and adjusting the mechanical and electrical driving equipments, governor sleeve, shaft assembly, bearing/contact/governor jaws, car & hall mechanical buttons, car & hall position indicators, car direction indicators and all other car and landing signal/fixtures, deflectors, car and counter weight guide rails and buffers, etc including replacement of all defective /spares parts other than mentioned e.g. wires, lugs, nut bolts, screws, hand rails, light luminaries, ventilating fan, holder, lubricant, gear oil, air cord, landing wheel air cord wheel, rubber bush, rail guide shoe, all types of control panel & all type of their cards and software i.e. Air communication card, TTU card, computer card, hardware card, PCB, etc including welding, cutting, drilling etc and any other items required for smooth functioning of lifts for following lifts complete all as specified and directed by Engr-in-Charge. (a) 08 Passenger/544 KG . 1.5m/s, G+3 Floors - 01 No. (01 No. lift with machine room , MES No 676/7009/LF-13, Kone Elevators Sr No. 103890818) (b) 08 Passenger/544 KG . 1.5m/s, G+4 Floors - 02 No.(Machine room less (MRL), MES No 676/7009/LF-13, Kone Elevators Sr No. 104076300 & 1 No lift machine room less (MRL) MES No. 676/7010/LF-13, Kone Elevators Sr No. 104076306) (c) goods Lift 500 Kg 1.0 m/s, G+4 Floors - 01 No ( With machine room. MES No 676/7012/LF-13, Kone Elevators Sr No. 1341240012)
Providing and Laying Underground Sewerage Networks in Zones 12-1 and 12-2 and Constructing In-line Pumping Station 12-2-1 at Odiampet in Puducherry
Manufacture, Supply and Delivery of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron of Grade GGG 40 or GGG 50 and disc of ductile cast iron GGG 40 or GGG 50 with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 and with 5 years warranty 150 mm dia PN-1.6
Providing Internal Arrangements Such as Aluminium Partition, Mosquito Net and Bed Screen arrangements, Public Toilet, Bio Medical Waste Storage Room, Laundry and CSSD Room arrangements in Govt District HQ Hospital at Kulithalai in Karur District
Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu.Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Eachs., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers.. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete. Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. (With automatic Door Closure and Hinges)