School & Classroom Furniture Tender Results

FURNITURE SUPPLY

Class Room Table (Dual Desk) with Attached Chair Class LKG to 2nd The product should be in complete knock down structure as much as possible/feasible enabling case in transportation and assemblies within classrooms. The panels are made from 17±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides. Top Dimension shall be 965mm X 355mm. Top Height shall be 533mm. Seat Dimension shall be 970mm X 254mm. Seat Height shall be 296mm Back dimensions shall be 970mm X 152mm. Size may vary +/- 5mm. pipe should be isi marked The Under structure is Made of ERW tubes 25 ±0.3mm x 25 ±0.3mm x1mm ±0.096mm thk 25mm x 50mm 1.2mm thk #0.096mm thk side panel should be made by 0.510mm CRC iron Sheet inside the pipe frame powder coated 50microns(+10) at base which are welded to the desk and seat supports that are made of 25mm x 50mm 1.2mmthk ±0.096mm thk powder coated 50microns (±10) Stiffeners that are provided between the 2 vertical frames at base and back of seat are made from ERW tubes 25±0.3mm x 25±0.3mm x1mm ±0 096mm the front panel should be made by 17 ±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides The tubes are closed with plastic caps/iron sheet Additional horizontal supports of ERW tubes 25±0.3mm x 25±0.3mm x1.2±0.096mm thk powder coated 50microns (±10) are placed Between front legs and between back legs to add the rigidity of the structure The storage shelves are made from from 17±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides BASED on 25x25x2mm iron angel Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles. They are made from 60 mm dia MS rods powder coated 50microns (±10) The under structure is assembled using MS Trilobular Taptite screws. Nylon studs are provided on bottom side of RH/LH Frame All Fabricated parts which require welding are MIG/Spot welded The Screw joining Wooden Panels to under structure, are Chip Board Screws. All steel structural components shall be made from virgin material and. Recycled steel will not be accepted. All the 8 support should be joint side panel with 9mm screwse/elkey bolt and sand blasting powder coating required

700074990 MBOA Furniture Items Purchase for School NTPC