Loading…
Loading…
7,751 results • Latest
CONSTRUCTION OF BADMINTON COURT AT TAPKARA
Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form topand bottom rail and 115mm wide PVC sheet out of which 75mm shall beflat and 20mm shall be tapered on both sides to form lock rail. Top, bottomand lock rails shall be provided either side of thepanel. 10mm (5mm x 2 )thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). 8.152.1 (i) PVC door shutter
Construction of Devarmal to Dholnar Road Length 3.00 Km.
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications 710.1.4 of I.R.C. 78 and 2200
SPECIAL REPAIRS TO BUILDING NO P-34 (SAILORS MARRIED ACCOMODATION) AT NAUVEER NAGAR AND AREA DRAINAGE NEAR MT WATCH TOWER AT NAVAL BASE INS DWARKA OKHA UNDER GE NAVY PORBANDAR
S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Comprehensive Annual Rate Contract for Carrying out Maintenance Activities in Mainline ROW, RCP/MOV Locations under WRPL Chaksu Base Mainline Jurisdiction
In consideration of Indian Oil Corporation Limited (Pipelines Division) (hereinafter called “the Corporation” which expression shall include its successors and assigns), having awarded certain work for and relative to (Name of the Project/Work) to (Name and address of the Contractor) (hereinafter called “the Contractor” which expression shall include its successors and assigns), upon certain terms and conditions inter-alia mentioned in the Corporation’s Letter of Acceptance No. __________________dated _______________________ read with the relative Tender Documents (hereinafter collectively called “the Contract”, which expression shall include any formal contract entered into between the Corporation and the Contractor in supersession of the said Letter of Acceptance and all amendments and/ or modifications in the contract) inclusive of the condition that the Corporation may accept a Surety Bond of an Insurer registered under Insurance Regulatory and Development Authority of India (IRDAI) in India in lieu of payment of the Initial Security Deposit/Security Deposit as provided for in General Conditions of Contract forming part of the said Tender Documents:
SPECIAL REPAIRS TO BLDG NO P- 151(QTR NO. 1 TO 4) AT NANDAMBAKKAM UNDER GE STM CHENNAI
Dismantling wrought iron or mild steel work of any description not otherwise provided for
REPAIR TO STATIC WATER TANK, COMPOUND SECURITY WALL, FENCING, GATE AND OTHER MISC WORKS AT SHESHARTHANG AREA OF AGE BR-I UNDER GE 860 EWS.
M&L for preparing old plastered or unplastered surfaces including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge. (Note : Ladders, scaffolding will be provided by Contractor where required)