Loading…
Loading…
7,721 results • Latest
Repair, Replacement of Unserviceable Spares of Existing Fire Fighting System at RGSSH
The Schedule of Quantity are attached with the Tender Document.
Overhauling of BFP Cartridge Spares Services during AOH
Servicing of BFP Cartridge - FK4E36
Construction of 100 Bedded Working Women Hostel at Devipur, Deoghar Near AIIMS Jharkhand
enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having
RMO E and M Services at Sewa Kutir, Kingsway Camp, Delhi. (SH- Replacement of Old defective feeder Panels with their accessories and cable work).
Supplying, installation, testing & commissioning of CPRI approved modular type polycarbonate thermoplastic floor mounted electrical panels of size 2300X1735X600 mm complete with 400 A Copper Bus bar suitable for following incomer and outgoing capacity alongwith CC foundation of 1:3:6 (1 Cement : 3 Coarse : 6 graded stone) aggregate 20mm (NS) (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick with necessary nuts & bolts or grouting into the foundation for fixing the panel, The enclosure shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti-acid & anticorrosive, IP65, glow wire test for 960 deg. C, The gasket material shall be Polyurethane, while the gasket shall be internally embedded. The manufacturer of board/ panel shall submit a copy of CPRI test report, Degree of ingress protection IP-65 in accordance with IEC 60529, a copy of type test report of a board made out of polycarbonate thermoplastic panel in accordance with IEC 60439-1 and IEC 61439-2 for power switchgear and control gear assembly, routine test certificate from manufacturer/ principal company in accordance with IEC 60439-1 (mainly consisting of Degree of protection of system, Temperature Rise Limit, Dielectric properties, Short Circuit withstand strength, Effectiveness of protective circuit, Clearance and creepage distance, Mechanical operation Etc.) for better safety the polycarbonate enclosure shall be fire retardant & self-extinguishing in accordance with IEC 60695-2-1, DIN VDE 0304 Part3, UL Subject 94 for Flammability V-2, It should be tested at glow wire test for 960 Deg, C. The impact stregth of polycarbonate enclosure/ Boards i.e the degree of protection against mechanical load shall be in accordance with EN 50298-98 for IK08. The MCB/RCCB switching operations/ accessing the MCB duly should be preferably by opening of a window flap. Panel should have consisted of dew guard which is a passive solution for mitigation of condensation i/c dismentling of old existing panel and disconnection the existing cables and reconnection in this panel i/c credit for old defective panel etc complete as per attached drawing etc as required. (Note:- The board manufacturer must submit the copy of type test reports for polycarbonate Thermoplastic Board)
Construction work of Children Home for Boys under Mission Vatsalya at Charaideo district.
12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "Y" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "Y" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "I" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including. required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T runners to be suspended from ceiling using GI siotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level chps of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer in charge 12.52.2 Gi Metal Ceiling Lay in perforated Tegular edge giobai white coior tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of Gl sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polvester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece
Please refer in BOQ
Providing Consultancy Services Including Survey, Detailed Investigations, Study, Structural Design, Estimation, Preparation of Detailed Project Report & getting checked from DIQC JK/NIT/IIT and vetted from State Technical Agency (STA) and Principal Technical Agencies (PTA) for Bridges having Span more than 15 Mtrs as per latest IRC Codes. (Complete Job). In PMGSY Division Mendhar PMGSY-IV in Jammu Province J&K UT (Complete Job)