Loading
Loading…
Loading…
79 results • Latest
Construction and maintenance of Rural roads under PMGSY-IV, Batch-I, 2025-26, Package No. RJ08P4-05 (District Bikaner)
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
Providing of Shredder in MC Phagwara
Providing of Shredder in MC Phagwara
Typical Estimate of setting of Plastic Waste unit at various locations Pataudi and sohna
Supply of 02 No. Plastic Waste Management Units 1. Providing and fixing of Plastic Shredders as per specifications given below (Type of Shredder:Twin Shaft Type;Nature of operation:Heavy Duty:Hopper loading method:Conveyor:Powered by :Electrical motor:Class of motor:IE3/IE4:Electrical Panel type:Independent:Control Panel:PLC based:Waste Bin capacity:2000 Ltrs Approx.:Type of conveyor:Slider type conveyor sorting conveyor:Handling capacity of conveyor:5 to 10 tonne per hour/ 50to 80 tonne per day:Motor of conveyor :2 HP single phase) 2. Providing and fixing of Plastic Bailing Machine as per specifications given below (Type of Bailing Machine:Hydraulic Type: Type of Pump:Gear type com plunger pump:Capacity:25 tonne:Powered by :Electrical motor:Class of motor:IE2/IE3/IE4:Electrical Panel type:Independent:Gap between top & bottom plate:1400 mm:Thickness of clamping plates:8 mm:Motor :3 phase 50 Hz. 6 to 7.5 HP) 3. Providing and fixing of Dust Removing Machine as per specifications given below (Power source:Electric:Motor power:15 HP:Wash capacity:1 tonne per hour:Voltage:415 V:Power:15 HP:Phase:3 Phase :Operating system:Automatic:Type of body:Covered by MS Body Penal:Method of loading :Manual:Dust Removing Method: Dry friction mess roatating drum air blowing) Note Installation Charges are included.
GENERAL Budget 2025 26 20 Provision Improvements to Karuvanchal Vayattuparambu Pothukund Naduvil Road Km 3 860 to 7 200 Hill road Work General Civil work
55.24:Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (NRMB) @ 5.4 percent of mix and filler, transporting the hotmix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause NO. 507 complete in all respects (using 7% shredded plastic) Grading - II (13.2 mm nominal size)
Rates of Sanitation Material are to be Obtained for the financial year 2026-27
Fogging Machine ASPE per piece
Construction of Toilet, Yoga Shed, Culvert, Strom Water drain at Mageshwari Nagar Park and Providing and Laying BT Surface to Thiru Vi Ka Nagar in Ward No.38 and CC Surface To Sivagamin Nagar 1st Cross Street in Ward No.37 in Zone-3
Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.