Solar Panels Tenders

OD43246/2025-26 Supply and installation of Energizer with following specification 12 V Energizer of Make: JVA Z28 Energizer -dual zone energizer with 2 years warranty or equivalent, must confirm to IEC standard 60335.2.76 or IS 302-3-76 (1999) and all national and international standards of safety, switch to high and low power setting , solar panel option to recharge 12volt battery, Should possess the following output characters, Peak o/p voltage not more than 10kv on 50Kload, o/o energy 3.5 J minimum pulse duration 1.01-3.0m sec-,Pulse interval 1.1-1.4 sec, peak current 7.0-8.0 A

Supply and fixing aluminium-alloy body Solar stud with following specification :- (a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight. (b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point. (c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud. (d) Working time 3 to 4 days successively after the battery is fully charged. (e) Charging time for full charge One full sunny day. (f) Working temperature : 10 to 75 Degree Celcius. (g) Flash rate : 60 to 70 times per minute normally. (h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving. (j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx. (k) Solar stud should be free of maintenance and operational in all weather conditions. (i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess. Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank) (m) Weight of the Solar Stud should be 650 Gram approx. (n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface.

Cleaning of solar panels (Details Mentioned in NIT Annexure I.U)

Maintenance of solar-powered sludge pumps on daily basis with routine inspection, minor repairs, electrical and mechancial maintenance, cleaning of waste materials when blockage in pump wherever necessary including cost and conveyance of materials and all labour charges etc, complete as per specification.

OD43246/2025-26 Supply and installation of Energizer with following specification 12 V Energizer of Make: JVA Z28 Energizer -dual zone energizer with 2 years warranty or equivalent, must confirm to IEC standard 60335.2.76 or IS 302-3-76 (1999) and all national and international standards of safety, switch to high and low power setting , solar panel option to recharge 12volt battery, Should possess the following output characters, Peak o/p voltage not more than 10kv on 50Kload, o/o energy 3.5 J minimum pulse duration 1.01-3.0m sec-,Pulse interval 1.1-1.4 sec, peak current 7.0-8.0 A