Solar Panels Tenders

Solar power road marker (Solar Studs) The solar studs shall be made of aluminium alloyand poly carbonate material which shall beabsolutely weather resistant and strong enough to support a load of 13.635Kg tested in accordance with ASTMD 4280. It's colour ay be white, red, yellow, green or blue or combination as directed by engg-in-charge. The dimensions of solar studs shall not be less than 100mm x 100mm x 10mm. It shall have super bright LED's so as to provide long visibility from a distance more than 800m.

SOLAR PANEL 25WATT FOR MANUFACTURING SOLAR EMERGENCY

S&F All-in-One Solar street light 60 watts luminaire output (120 Lumen/Watt) with octagonal GI hot dip galvanised pole of height not less than 5meter and consist of high efficiency LEDs, efficient mono crystalline solar panel confirming to IEC 61215, IEC 61730, IEC 61701 & MNRE certified, new age lithium ferro phosphate battery enclosed in corrosion free IP22 CRCA box with suitable ventilation for fresh air and as per BIS certified and a silicon encapsulated high efficiency MPPT charge controller for high efficiency charge controller to change the batteries intelligent microprocessor algorithms automatic determine sunrise and sunset, along with aluminium housing and in-built PIR motion sensor, with a provision for higher charging efficiency, protection for deep discharge, overcharging etc., fixed with 04Nos of M16x600/EN 8 grade foundation bolt, 1 mtr arm for light fixing & RCC / PCC foundation all as per manufacturer's specifications/ instructions, including dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed. Note: The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

Supply and fixing of Lithium base Energy efficient integrated Solar street light of 30 watt in Aluminium Die casting body ,corrosion resistance,built in high efficiency solar panel and long life lithium ferro phosphate battery with high efficiency microprocessor based charge controlar Automatic dusk to input voltage 12.8 V with minimum 30 AH battery capacity ,Driver efficiency .85%,PV module minimum output capacity 60 W/h Mono itself will be used to sense the ambient light to switch ON/OFF the Lamp from outside from Light fittings and controled from Pole controlling switch,inbuilt MPPT charge controller,IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with grater than 150 lumen per watt,5700ANSI,,CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(135/85 degree) with PIR Sensor LED Life 50000 hrs (LM80 cerified LED),weight less than 15 kg with Green/Red indicator with with battery rating 12.8V-BIS standard along with 5 year warranty covered complete all as specified. Make : Orient / Tata PowerShakti fixtures / Phillips

Solar LED Standalone Street Light( 45W LED) with low maintenance lead acid battery for 3 day backup: A LED based solar street lighting system consisting of PV modules, electronics ,lead acid battery, and LED based luminaries all suitably mounted on a 6.0m tubular pole above ground , base plate etc as required included . The battery is charged by electricty generated through the PV module panel (180 i.e 90x2 )during day time and the luminaries provides light from dusk to dawn. Specification of of solar LED Standalone street Light: Poly crystalline silicon solar panels, High lumen LED for max. efficiency with lifetime> 50,000 hrs CRI nominal 70. Pressure die cast aluminium IP66 enclosure. Controller to charge batteries & microcontroller for autonomously determination of sunrise & sunset. Specific deep discharge batteries are used to store the energy. Metal battery box to be fitted at 5.0m height , suitable pole