Solar Panels Tenders

Solar Power road marker (Bolar Studs) The solar studs shall be made of Alumintum alloy and poly carbonate material whice shall be absolutely weather resistant and strong enough to support a load of 13635 kg tested In accordance with ASTM D4280. Its colour may be white, red,yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirments of IP 65 in accordance with IS:12063:1987 category 2 for protection aganist waler ingress. The Dimensions of solar studs shall not be less than 100mm X 100mm X 10mm. it shall have super bright LEDs so as to provide long visibility from a Distance of more than 800m. Its Flashing rate shall nol be less than 1 Hz. Its should be able to give the prescribed performance in the temperature range of - 40°C to +55°C. Its life shall be not less than 3 years The rate shall Include all materials, labour, equipments, fabrication, transportation, erection, installation and Incidentals all Complete as per direction of the Enfigineer-in-Charge. As per morth-804(8.1).

Solar Power road marker (Bolar Studs) The solar studs shall be made of Alumintum alloy and poly carbonate material whice shall be absolutely weather resistant and strong enough to support a load of 13635 kg tested In accordance with ASTM D4280. Its colour may be white, red,yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirments of IP 65 in accordance with IS:12063:1987 category 2 for protection aganist waler ingress. The Dimensions of solar studs shall not be less than 100mm X 100mm X 10mm. it shall have super bright LEDs so as to provide long visibility from a Distance of more than 800m. Its Flashing rate shall nol be less than 1 Hz. Its should be able to give the prescribed performance in the temperature range of - 40°C to +55°C. Its life shall be not less than 3 years The rate shall Include all materials, labour, equipments, fabrication, transportation, erection, installation and Incidentals all Complete as per direction of the Enfigineer-in-Charge. As per morth-804(8.1).

Supply and fixing LED Solar street light fitting 24 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete. Make : wipro,Havells,Oriental complete all as specified and directed by Engineer- in-charge.

Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 Watt, one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of six super bright LED with 10,000 mcd to 18,000 mcd completed as per manufacturers instructions etc. all as specified and directed with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 500 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.

Design, engineering, supply, installation, testing and commissioning of grid tied 2MWp solar PV system with required TOPCON Bifacial Solar PV panels, solar mounting array structure, String monitoring, solar cables, inverters, necessary cabling , plant monitoring system (SCADA) , lightning protection, surge protection, earthing system for array yard, measuring equipment for performance monitoring, piping for water cleaning of solar modules, illumination of array yard, housing for inverters and all other accessories as deemed to be necessary and complete as per attached technical specification to complete the work in all respects on the rooftop of PFFF building at NFC Kota