Loading
Loading…
Loading…
1,291 results • Best match
Augmentation of Water Supply Scheme Village Nanak Nagri in Block Phagwara, District Kapurthala (Under head NABARD XXXI/State Share/4215)
Providing, Fixing, Installing, Commissioning, Solar Panel Energy System (Monocrystalline) for amount of electric power required for running electric motor and other appliances such as fan, tube, Bulb etc in water works site. including Bi-directional meter and inverter of suitable capaity as per guidelines issued by PEDA complete in all respects.
DESIGN, ENGINERING, SUPPLY, CONSTRUCTION OF ALL CIVIL AND MISCELLANEOUS WORKS FOR INFRASTRUCTURE DEVELOPMENT OF 2000 MW RVUN SOLAR PARK INCLUDING WORKS MENTIONED IN TNC-05/2026-27 AT VILLAGE BODANA, TEHSIL- BAP, DIST. - PHALODI (RAJASTHAN)
Survey and Design Engineering: Detailed survey, required geotech investigation, planning, design & engineering for civil infrastructure of 2000 MW Bodana Solar Park (land area of the solar park is 4000 Ha) alongwith lay out plan of complete solar park land. The solar park consists of solar plots marked for each solar power project, common use infrastrucure & green belt area etc. as per scope of work.
Building Work
40012535 Design,Supply,Installation,Testing & Commissioing of Grid Connected Roof top solar PV System(Through net metering)(Make-Solar PV Panel(VIKRAM/WARREE/TATA POWER SOLAR SYSTEM/PANASONIC SOLAR) ,Solar-P.C.U-LUMINOUS/STATCON/MICROTEK/SU-KAM POWER SYSTEM,Solar Battery-EXIDE/OKAYA/LUMNOUS,DC and AC distribution-MCB-Legrand/L &T,HRC fuse-L&T/ABB,Copper cable-Finolex/Havells/Polycab) Ground Floor
Construction of Syunsi Barrage across Eastern Nayar river in Block Bironkhal Distt.- Pauri Garhwal, Uttarakhand.
Providing and Fixing Orient electric 6 30 watt white LED type Solar street Light including 6 m pole 40 mm dia & thickness of tube, Battery Capacity ≥ 12.8 V (nominal), 30 Ah at STC (1 day autonomy) with power output ≥ 75 Wp at 16.4 ±0.2 Volt at STC including solar pannel, Battery and cost of all Materials, labour, T&P etc. required for proper completion of the work excluding GST. As per attached Rate from GeM classification.
REPAIR MAINTENANCE OF DG SET LT PANEL AND CONNECTED WORKS AT AF STN BAMRAULI UNDER GE AF BAMRAULI
S&F in replacement of Lithium base Energy efficient integrated Solar street light of 36 watt in single FRP body duly polyurethane coating (Camouflage color), encases with monocrystalline solar PV panel of 65-67Wp,lithium battery 11.1/12.8V,33.0 AH with inbuilt BMS,IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminium reflector for better light distribution ,CRI>70, color temp 5700K-6500K Microcontroller based charge controller cum driver,automaticdimming function(First 04 hrs at full brightness & rest of the time at lower light level with PIR motion sensor), Dusk to dawn operation,suitable to working temp (-) 10C to (+) 55C ,weight not more thatn 16-18 Kg with adjustable MS clamp suitable for pole/wall mounting etc complete as reequired. Make: AXXON/HAVELLS/PHILIPS or equivalent as approved. Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint.
STMC work of NH 91 Ch. 421.300 to 422.200 Ch. 423.100 to 424.000 Ch. 425.500 to 427.460 Ch. 428.250 to 430.000 and Ch. 430.500 to 432.200 at district Kanpur Nagar in the State of Uttar Pradesh.
Solar Power road marker (Solar Studs) The solar studs shall be made of Aluminium alloy and poly carbonate material which shall in absolutely weather resistant and strong enough to support a lead of 13.635 Kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green of blue of combination as directed by the Engineer. Its water resistance shall meet the requirement of IP 65 in accordance with IS 12063:1987 category 2 for protection against water ingress. The dimensions of solar studs not be less than 100 mm x 100 mm x 10 mm. It shall have super bright LEDs so at to provide long visibility from a distane of more than 800m. Its flashing rate shal not be less than 1 Hz. Its should be able to give the prescribed performance in the temperature range o 4000+5500 the ..........shall be not less than 3 years. The rate sha include all materials, labour, equipments, fabrication, transportation erection, instalation and incidentials all complete as per direction of the Engineer-in-charge. SOR Lucknow Sl.No. 16 MoRTH-804.6.