Loading…
Loading…
1,340 results • Best match
REPAIR TO LT EXTERNAL ELECTRIC SUPPLY LT CABLES, LT OF LINES LT PANELS AND CONNECTED WORKS AT SEWAR FORT AND PARADE GROUND AREA UNDER GE BHARATPUR
Supply and fixing in replacement of Lithium base Energy efficient integrated Solar street light of 30/32 watt in Aluminium Die casting body / FRP Bpdy , corrosion resistance,integrated PV panel Automatic dusk to input voltage 12.8V with suitable battery ,Driver efficiency .85%,PV module itself will be used to sense the ambient light to switch ON/OFF the Lamp, inbuilt MPPT charge controller, IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with grater than 150 lumen per watt,5700ANSI, cool white(5500K-6500K),CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(120 degree) LED Life 50000 hrs, weight less than 15 kg with GReen/Red indicator swith with suitable battery rating 12.8V-BIS standard of complete all as specified. Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint.
SPECIAL REPAIR OF ROADS FROM FORT GATE TO SARASWATI KOOP AND OTHER UNIT AREA IN OD FORT UNDER GE (EAST) PRAYAGRAJ.
Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc., complete all as specified and directed.
REPAIR TO ROAD SURFACE, ROAD BERMS AND ROAD FURNITURE AT NABHA UNDER GE (S) PATIALA
Supply and fixing solar road stud/cateye shall be produced from an engineered polymer selected for superior impact resistance and weatherability. The top of the marker should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer-in-Charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting for solar energy into electricity, a illumination. The marker shall also have high reflective lenses for conspicuity in passive mode and dual shanks for applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height : 65+ 2 mm & maximum diameter : 136+ 4 mm. The body of the solar cateye shall be resistant to dust and water ingress as per IP 65 & & IP 68 standards as per testing parameter requirement of MoRTH Section 800. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. Complete all as specified and as directed by Engineer-in-charge.
Installation of solar based deep borewell at Gargali Village health sub-centre under CSR Scheme 2025-26 of Kuju Area, CCL.
Providing and fixing solar power operated 3 HP Submresible pump AC 3 Phase input (ISI) including 3 solar controller, PV arry mono/ crystalline cells 3000 watts peak (Minimum 125 watt peak each PV module) mounting structure and tracking system, electronics and protections, MCB, Arry junction box, on off swithc, interconnection cable, complete as per MNRE approved techinal specifications and direction of Engineer -in- charge. (Note: The PV arry is to be installed on RCC roof of 3MX3 Minternal sized pump house with ceiling height 3M)
ENGINEERING PROCUREMENT AND CONSTRUCTION (EPC) OF OTM ACCOMMODATION UNDER GE (C) KHADKI
Supply and fixing of Elegant look LED Solar light fitting 40 W AIO LED Solar Street lights having extruded aluminium housing, 100 Wp or more Mono Crystalline Panel/Laminates ((Made in India) fixed on the top of the Luminaire housing, maintenance free 12.8 volts 36 Ah or more LiFeP04 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs ) back up in dimming mode. The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of > 6400 lm as per LM 79 report of third party NABL lab . The lumen efficacy should be > 160 lm/w and the maximum wattage of the AIO street light luminaire shall not be more than 40 W to deliver 6400 lm Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports t~ justify the Lum~n efficacy, luminaire output , IK 07 and IP 65 protection ( In house NABL lab reports will not be acceptable). The complete Solar lighting system must be warrantied for a period of 5 years . The Solar lighting companies must be having toll free base service network to provide immediate after sales service through their service network available in different districts of the state .The Solar lighting companies should submit the lighting design report prepared by their in house lighting design team if required as per the direction of engineer in charge. Lenses should be provided for effective distribution of light on the ground .The AIO solar street lights shall be of Anchor by Panasonic make PA040W11 MLF2401 or equivalent in Philips/Crompton/Havells.
Construction Work of Garbage Vulnerable Points Development as Per Various Location Chart. At, Palitana. Under Nirmal Gujarat -2 Year-2025-26. (Fourth Attempt)
Supplying and erecting LED Solar street lights with High power White