Solar Pumps Tenders

Supply,hoisted and fixed in position Flat plate Solar water collector (solar panel) suitable for 200 ltr solar water heater for replacement of existing unservicable solar water panel/collector any make including dismantling and taking down old unserviceable/damaged solar water panel/collector all as directed

Supply, Installation, Testing, and Commissioning of 3 numbers of 200 W solar floodlights complete with SMD 3030 LEDs having a color temperature of 6000–6500 K (cool white), LED lifespan greater than 50,000 hours, luminous flux of 20,000 lumens, luminous efficacy of 120 lm/W, beam angle of 140° × 70°, charging time of 4–6 hours, lighting time of 8–12 hours, and equipped with remote and timer control, IP66 protection. Each unit shall be provided with a mono-crystalline solar panel of size 600 × 350 mm, rated power 35 W, open circuit voltage 7.2 V, short circuit current 6.41 A, voltage at maximum power 7 V, and current at maximum power 5 A, LiFePO4 battery 3.2 V with 36 Ah,BMS protection 10A Cycle life 2000 (warranty 1 year) make Primaa or its equivalent including all accessories etc as required.

Providing and Installing PVC deep Tube well 100mm i/d straight 150mtr. Deep with Hand Boring, Pumping Machinery, Disinfection Unit electrically based and Construction of pump chamber 2.50m X 2.50 M without Gravil Pit complete in all respects Solar Panel 1 KW & Providing, Laying, Cutting, Jointing & Testing of PVC pipe 6 kg/Cm2 for rising main & 6Kg/Cm2 for distribution. including cost of excavation, dismantling & relaying of dry brick on edge paving and House Hold Water Connection, 300Ltr. PVC tank, development of water works site i.e. Corner Pillars, Barbed wire Fencing, pcc fencing poles, D-Hooks, Gate Pillars, Foot path, Sign Board, including carriage of material and Envoirment complete in all respect for Water Supply Scheme Bir Sarkar (Under Head Nabard-XXXI/State Share/4215)

Solar Panel 540 watt

Solar Panel Mono/ >500Wp or higher to make Total Capacity of 500KWp (15KWp Hybrid + 485KWp On-grid) Grid connected SVP. The panels should be as MNRE Approved (Mono-perc / by-facial). Along with the Module Mounting Structure. ( Refer SBD for Scope of work) and Smart Meter.

Supply, installation, testing and commissioning of following :- (a) Solar 7.5 HP solar AC/DC submersible pump-motor-1 Nos, V6 submersible pump 8/10 stage water/oil filled impeller/mixed flow, the impeller should be of stainless steel made. Voltage : 320V (three phase), Current rating : 15A Max, Pump Head : 100 meter, Wattage range 7500+5% variation, RPM : 2850, outlet 1.5"/2.0" inch, Discharge : 10000-13000 LPH. (b) 7.5KW Solar PV Module (not less rhan 540 WTP ), Monoperc PV Module (ALMM approved). (c) 7.5 KW/HP Solar pump hybrid controller, VFD/MPPT Technology base, including powder coated Junction box, MCB & Misc Boxes as required at site.Make : Sunlight or equivalent approved by MNRE, Model : 7.5HP/5.59KW, Current rating : 16 Amp, Voltage : 380V (3 phase), Inbuilt MPPT, should have inbuilt displace, Protection : should have dry run protection, overload protection, Low load voltage, Cloudy weather safety protection, Reverse polarity protection, short circuit protection, open circuit protection. (d) GI/MS frames/structure for fixing solar panel i.e 7.5KW PV Module with MC4 Connector including Nuts, Bolts/J hooks etc. Note :1. The SPV as per IEC and MNRE standards should be in synchronisation with the Water Pumping System Capacity is normally in the range of 7.5 KW. SPV Array should be mounted on a suitable structure with a provision of tracking the sun. 2. The rate is inclusive of transportation cost upto partapur, Ladakh. 3. The cost is inclusive of PCC 1:2:4, B1 type. 4. The cost is inclusive of Loading/unloading charges. 5.The cost is inclusive of 6 Sqmm, 2 core copper cables for connecting PV panels to MPPT/Controller, Junction boxes, MCB boxes and 6"x6" cable trays upto solar pump and Panel to controller 6. The rate is inclusive of fabrication of structure and Earthing , lightning protection and engineer/labour charges.