Solar & Renewable Energy Tenders

ON GRID SOLAR POWER: Design, Supply, Installation, Testing and commissioning of 20 kVA Solar On grid complete pacakage plant with required Meter. Solar Panel : Polycrystalline solar panel Panel structure: Included Solar Panel Watt: Min 330 Wp On grid PCU/: Included with min 2 years of warranty With protection of Short circuit current and earthfault AC Cable and DC cable : 50 meter Included All accessories included : Lugs , MC 4 c AC Cable And DC cable :50 meter Included All accessories included: Lugs,MC4 connectors etc

Solar LED blinkers Supplying and erecting red /yellow unbreakable polycarbonate body Solar Blinker 300mm dia. LED lamp confirming to IRC:93 and IS:7537. It shall have Light Emitting Diode (LED) - Hi Bright technology (Compliant to EN12368 or equivalent BIS standard). The Signal Switching shall be Solid State, with Opto-isolation. The Automatic operation mode shall have functional flashing rate available at 50% Duty Cycle 50 ог 60 Flashes/minutes. The Electrical Power Supply shall be solar based 12 VDC operating at Ambient temperature 0° to 55°C. The solar power system shall have in-built charge Controller - Low/High cut out, Solar SPV Module 60 Watts, Maintenance Free Battery (60AH) (having back up for operating blinker for 72 Hrs in absence of Sun or during rainy or foggy days. The Solar System shall be housed in a weatherproof pole mounting cabinet with clamp and mounting accessories. The Solar Blinker shall be supported on Gl circular pipe 80 NB, 3.2 mm thickness confirming to IS 1239, 3m above the Finish Road level. Gl circular pipe shall be firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60, 60 cm below ground level as per approved drawing. Alternate white and yellow bands (Minimum four bands) of Type XI retro-reflective sheeting shall be pasted @ 0.5m c/c starting from a height of 0.5 m above the finish road level.

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(for AC outdoor Stand = 204 Kg Main Panel Stand -46 kg watrer pump panel = 36 Kg Soalr water Heater Stand= 126.44 Kg x 2 Nos= 252.88 kg for solar Panel structure = 40 kg/kw x 30 Kw= 1200 kg for UPS battery racks = (40 kg x 4 nos 62 kg x 1 nos)) [6-1-19]

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy