Loading
Loading…
Loading…
1,334 results • Best match
Supply and Installation of LED Solar lights for illumination of Narasinghpur Town Road (Club Chhak-Rajabati) from 0.340 km to 0.930 km and Narasinghpur Town Road (Thana Chhak-Sanbagh Lane) from 2.350 km to 3.420 km for the year 2025-26.
Supply of Elegant look 60 W AIO LED Solar Street lights having extruded alluminium housing, 180Wp or more (subjected to final panel backup calculation with dimming profile of 100% output for 2 hrs, 90% output for 1 hr, 60% output for 1 hr and 50% output for 8 hrs per day. The calculation is to approved by SE,Electrical Circle (R&B) before final procurement of the product.) Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 96 Ah or more (subjected to final battery calculation with dimming profile of 100% output for 2 hrs, 90% output for 1 hr, 60% output for 1 hr and 50% output for 8 hrs per day. The calculation is to approved by SE,Electrical Circle (R&B) before final procurement of the product.) LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor.The solar panel and battery should be designed to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 08 and having lumen output of >=10000 lumens and having lumen efficacy not less than equal to 167 lm/w) as per LM 79 report third party/central/state govt accredited NABL lab to justify the lumen output & lumen efficacy . Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party central/state govt accredited NABL lab reports to justify the lumen efficacy,luminaire output, IK 08 and IP 65 protection.The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole.The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary aftersales Service will be provided through their tollfree base service network located within 100 KM from the project site. The Solar Street light manufacturer should have own NABL accredieted laborotory. The following test reports must be submitted and approved from SE,Electrical Circle (R&B) for the technical acceptance of the products. 1.LM 79 REPORT and LM 80 Report ( from third party/central/state govt accredited NABL lab of AIO solar light) , 2. IK 08 ( from third party/central/state govt accredited NABL lab of AIO solar light ) , 3. IP 65 (Report of third party/central/state govt accredited NABL lab of AIO solar light 4. EN50530 – MPPT Efficiency , 5. IEC61547 , 6. IEC61000-3-2 – EMC , 7. IEC 60598-2-3 ,8. IEC 62109-1, ( The necessary test reports of third party/central/state govt accredited NABL lab from sl no. 4 to sl no.8 must be submitted for any wattage of AIO solar light ) Make-(Philips/Panasonic/Wipro/Crompton/Bajaj/Havells/LT or equivalent). NB: The cost includes 5 years CMC including repair/ Maintenance/ replacement of the product in case of any defect. The battery and panel figures are indicative only. Final procurement shall be done after approval of panel and battery backup calculation from Superintending Engineer, Electrical Circle (R&B) Odisha, Bhubaneswar.
Supply and Installation of LED Solar lights for illumination of Baramba town road from 0.00 km to 0.942 km Baramba Town road (Tahasildar Qtr. Road) from 0.942 km to 1.100 km Baramba Sahi to Hada Dandha Sahi) from 1.410 km to 1.486 km, Cuttack.
Supply of Elegant look 60 W AIO LED Solar Street lights having extruded alluminium housing, 180Wp or more (subjected to final panel backup calculation with dimming profile of 100% output for 2 hrs, 90% output for 1 hr, 60% output for 1 hr and 50% output for 8 hrs per day. The calculation is to approved by SE,Electrical Circle (R&B) before final procurement of the product.) Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 96 Ah or more (subjected to final battery calculation with dimming profile of 100% output for 2 hrs, 90% output for 1 hr, 60% output for 1 hr and 50% output for 8 hrs per day. The calculation is to approved by SE,Electrical Circle (R&B) before final procurement of the product.) LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor.The solar panel and battery should be designed to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 08 and having lumen output of >=10000 lumens and having lumen efficacy not less than equal to 167 lm/w) as per LM 79 report third party/central/state govt accredited NABL lab to justify the lumen output & lumen efficacy . Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party central/state govt accredited NABL lab reports to justify the lumen efficacy,luminaire output, IK 08 and IP 65 protection.The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole.The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary aftersales Service will be provided through their tollfree base service network located within 100 KM from the project site. The Solar Street light manufacturer should have own NABL accredieted laborotory. The following test reports must be submitted and approved from SE,Electrical Circle (R&B) for the technical acceptance of the products. 1.LM 79 REPORT and LM 80 Report ( from third party/central/state govt accredited NABL lab of AIO solar light) , 2. IK 08 ( from third party/central/state govt accredited NABL lab of AIO solar light ) , 3. IP 65 (Report of third party/central/state govt accredited NABL lab of AIO solar light 4. EN50530 – MPPT Efficiency , 5. IEC61547 , 6. IEC61000-3-2 – EMC , 7. IEC 60598-2-3 ,8. IEC 62109-1, ( The necessary test reports of third party/central/state govt accredited NABL lab from sl no. 4 to sl no.8 must be submitted for any wattage of AIO solar light ) Make-(Philips/Panasonic/Wipro/Crompton/Bajaj/Havells/LT or equivalent). NB: The cost includes 5 years CMC including repair/ Maintenance/ replacement of the product in case of any defect. The battery and panel figures are indicative only. Final procurement shall be done after approval of panel and battery backup calculation from Superintending Engineer, Electrical Circle (R&B) Odisha, Bhubaneswar.
refer tender notice
Solar Water Heater Performance Test Setup (Item Code: o016)
Supply, Installation and Commissioning of Quantum Efficiency Measurement System - IQE to Rani Channamma University, Belagavi under PM USHA MERU Scheme
Quantum Efficiency IQE Measurement System for Photovoltaic Devices
Installation of Solar Light near ICDS Centre at Godamline Sansad within Ghoshpukur GP under Phansidewa Development Block under 15th. F. C. Fund for the year 2025-26 (Activity ID 114287699).
Supply for fitting of 12 Watt & 2500 Lumens All in one Solar LED Street Light Luminaires having polycrystalline solar cell.Detailed technical specifications given below :- a. system Wattage : Should not be more than 12 Watts (+/- 5 %) b. System Lumen Output : Should not be less than 2200 Lumen. c. System Efficiency : Should not be less than 200 Lumens/Watt. d. Battery Chemistry : Lithium Ferrow Phosphate (LifeP04) battery should be used. e. Battery Capacity : > 170Wh. f. Charging Electronics : Integrated MPPT charger with driver. g. Charger Efficiency : >90%. h. Driver Efficiency : >90%. i. LED Burning Hours : Should be >5000 Hrs. @ L70/. j. IP Rating : IP65. k. Housing : Aluminium Pressure Die Cast. l. Front cover : UV stabilized polycarbonate cover should be used for better light distribution. m. CCT (Colour Temperature) ; 5700 (+/- 5%). n. CRI : > 70 (+/- 5%). o. Luminate should have in-built PIR sensor. p. Charging & Discharging LED Indicator : Should be provided in luminaire. q. Input Voltage : 12V/DC. r. Adjustable Tilt Angle (Deg.) s. Solar Cell Efficiency : Min. 12% Polycrystalline. t. Operating Temp. Range for Light Engine : 0 to +35 deg. u. Operating Humidity : Upto 95%. v. Safety of Solar Panel Module : IEC 61730-1,2 & IEC 61215. w. Manufacturer should provide LM79/LM80 reportscorresponding to the luminaire/LED chip along with Type Test Certificate. Warranty - 3 years warranty against manufacturing defects from date of supply. Lumanaire Make : Philips BRP710P LED25 CW MR S1 12V LFP ALO Solar Equip IN or equivalent model.
Installation of Solar Light at Howdavita Sansad within Ghoshpukur GP under Phansidewa Development Block under 15th. F. C. Fund for the year 2025-26 (Activity ID 114301761).
Supply for fitting of 12 Watt & 2500 Lumens All in one Solar LED Street Light Luminaires having polycrystalline solar cell.Detailed technical specifications given below :- a. system Wattage : Should not be more than 12 Watts (+/- 5 %) b. System Lumen Output : Should not be less than 2200 Lumen. c. System Efficiency : Should not be less than 200 Lumens/Watt. d. Battery Chemistry : Lithium Ferrow Phosphate (LifeP04) battery should be used. e. Battery Capacity : > 170Wh. f. Charging Electronics : Integrated MPPT charger with driver. g. Charger Efficiency : >90%. h. Driver Efficiency : >90%. i. LED Burning Hours : Should be >5000 Hrs. @ L70/. j. IP Rating : IP65. k. Housing : Aluminium Pressure Die Cast. l. Front cover : UV stabilized polycarbonate cover should be used for better light distribution. m. CCT (Colour Temperature) ; 5700 (+/- 5%). n. CRI : > 70 (+/- 5%). o. Luminate should have in-built PIR sensor. p. Charging & Discharging LED Indicator : Should be provided in luminaire. q. Input Voltage : 12V/DC. r. Adjustable Tilt Angle (Deg.) s. Solar Cell Efficiency : Min. 12% Polycrystalline. t. Operating Temp. Range for Light Engine : 0 to +35 deg. u. Operating Humidity : Upto 95%. v. Safety of Solar Panel Module : IEC 61730-1,2 & IEC 61215. w. Manufacturer should provide LM79/LM80 reportscorresponding to the luminaire/LED chip along with Type Test Certificate. Warranty - 3 years warranty against manufacturing defects from date of supply. Lumanaire Make : Philips BRP710P LED25 CW MR S1 12V LFP ALO Solar Equip IN or equivalent model.