Solar Street Lights Tenders

Module 100 WP(ERTL and Flash Tested) (Supplying and erection) of moduler panel. Supply of 100wp Poly/ Mono crystaline module with IEC 61219, IEC6173-1,2 compliance with I. The PV module shall contain crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61219 Edition II. The power output of the module(s) under STC would be a minimum of 75 Wp at a load voltage* of 16.4 + 0.2 V III. The open circuit voltage of the PV modules under STC would be 21.0 Volts IV. The module efficiency would be 14.5% V. SPV module shall be highly reliable, lightweight and shall have a service life of more than 25 years. SPV modules shall have a limited power loss of not more than 10% of nominal output at the end of 10 years and not more than 20% at the end of 25 years VII The solar module shall be able to withstand the following environmental conditions normally encountered at site - Temp. extremes ranging from -100 C to +850 C Wind load -150 km/h Maximum mean hourly rainfall of 40 mm Humidity level upto 95%, (HR/ Vikram/Any MNRE Approved) VIII. Strip must contain the following details a) Name of Manufacturer b) Model or type number c) Serial No. d) Year of make (Including cost of Panel mounting structure)