Solar Street Lights Tenders

Supply and fixing “Lithium based Energy Efficient Integrated Solar Street Light 30 to 35Watt" in Single FRP body with duly Polyurethane coating (Customised color), encases with Mono crystalline Solar PV Panel of 65Wp, Lithium Battery 11.1/12.8V, 30AH with inbuilt BMS, IP 66 and IK08, High brightness Warm White -LED(180- 200lm/watt) lamp with Aluminum reflector for better light distribution and, CRI >70, Color Temperature 5700K - 6500K, Microcontroller based charge controller cum driver, automatic dimming function ( first four hours at full brightness & rest of the time at lower light level with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature: (-) 10C to (+)55C, weight not more than 12-15kg with adjustable MS clamp suitable for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections with Vital Parameters Test report from NABL accredited lab and should be of made in India with CE & ROHS compliant including supply and installation of 6 meter Hot dip Galvanized Octagonal Pole with 70mm Top and 130mm bottom with 200x 200x 12mm base plate and 16x 600mm 4 nos foundation bolt incl cement concrete 1:4:8 type D2 ( using 40mm graded stone aggregate) for foundation of pole / stay including form work . Make : Crompton/Havells/Bajaj or Equivalent

Shifting of solar security light fitting from one location to another location not more than 2 Km carefully with the help of tractor / Crane including all towing arrangement and taking out all connections, earthing of defective parts of solar street light and connecting carefully all connection including PCC , painting of pole as required at site and as directed by Engr-in-Charge.

Supply & Installation, Testing & Commissioning of SOLAR STREET LIGHT 12 W semiintegrated with solar module 12 v 75 w , solar battery Lithium ion Ferrous phosphate 12.8 v 18 Ah , pole 5mtr GI, outer dia 75mm thickness 1.6mm all other accessories , cable 2 core copper 1mm , including all other . Complete in all respects.

Module 100 WP(ERTL and Flash Tested) (Supplying and erection) of moduler panel. Supply of 100wp Poly/ Mono crystaline module with IEC 61219, IEC6173-1,2 compliance with I. The PV module shall contain crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61219 Edition II. The power output of the module(s) under STC would be a minimum of 75 Wp at a load voltage* of 16.4 + 0.2 V III. The open circuit voltage of the PV modules under STC would be 21.0 Volts IV. The module efficiency would be 14.5% V. SPV module shall be highly reliable, lightweight and shall have a service life of more than 25 years. SPV modules shall have a limited power loss of not more than 10% of nominal output at the end of 10 years and not more than 20% at the end of 25 years VII The solar module shall be able to withstand the following environmental conditions normally encountered at site - Temp. extremes ranging from -100 C to +850 C Wind load -150 km/h Maximum mean hourly rainfall of 40 mm Humidity level upto 95%, (HR/ Vikram/Any MNRE Approved) VIII. Strip must contain the following details a) Name of Manufacturer b) Model or type number c) Serial No. d) Year of make (Including cost of Panel mounting structure)