Sports, Music & Recreation Tenders

Air Walker Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover..

Air Walker Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover..

BOQ Notes: 1. Erection & commissioning materials (such as double compression cable glands, conduit fittings viz. couplers, elbows, bends, tees, circular boxes, inspection bend etc. conduit accessories viz. clips, saddles, spacing plates, entry bushes, lock nuts, check nut, plugs, heavy duty lugs, ferrules, expansion fasteners, covers for power outlets in wash rooms and showers, ball & sockets, earth clips, fan boxes, clamps, screws, ceiling rose, casing and capings, adapter gland set, reducer, U bolt with nut washer, csk nut bolt, M / H Hook with rawl plug, Nail clamp for 3Cx2.5 Sq. mm CU LT XLPE Cable, Electrical tape etc.) and accessories including commissioning & operational spares up to system handing over to NTPC has to be worked out for complete and successful erection & commissioning of the total supply and free issue material as per BOQ. The price to be quoted for MAIN SUPPLY at S.No.14 accordingly. Bidder to furnish detailed itemwise breakup of quantity (for all equipments and fittings under "MAIN SUPPLY" & "ERECTION and COMMISSIONING (INSTALLATION)) and unit prices for Erection & commissioning materials as separate Annexure alongwith price bid for reference. 2. Erection & commissioning materials for equipments and fittings under bidder scope of supply is in bidder's scope, Erection & commissioning materials for free issue materials (like GI wire & Flat, MS Rod, Hume Pipe, PVC Wire, Hot dip Galvanised Rigid Steel Conduits, Cable and buried underground cable as listed at S.No. 10,11,12,16,17,18 and 19 of Unpriced Schedule for Erection and Commissioning Schedule respectively ) is also in bidder's scope, Accordingly, Erection & commissioning of all equipments and fittings under "MAIN SUPPLY" & "ERECTION and COMMISSIONING (INSTALLATION)" is in bidder's scope. 3. Conduit, Wire & Cable shall be supplied by BHEL free of cost. a. All erection & commissioning material and consumables for above shall be supplied by bidder. Cost for the same is deemed to be included in MAIN SUPPLY at S.No.14 accordingly. b. Fabrication charges of J-Pole shall be included in erection & commissioning prices of conduit, no separate charges shall be payable for the same. 4. Fabrication & painting charges of structural steel shall be part of erection charges fo those equipment for which the same is being used. 5. All measuring and testing instruments required during erection, testing, commissioning and performance testing shall be arranged by the bidder and taken back. 6. Installation of lamp shall be part of E&C of respective fixture. The E&C price of fixtures to be quoted accordingly. 7. Lighting shall be Energy conservation building code (ECBC) compliant, bidder to include E&C of all items (like lighting fixture, lighting lamp, lighting panel, switch boxes, sensors, automatic control system) required fo the same and furnish detailed BOQ along with the bid. 8. For any clarificatin please refer technical specificaiton : PE-TS-520-558-E001

TROPHY FOR WINNER (BEST QUALITY) 3.5'

TROPHY FOR WINNER (BEST QUALITY) 3.5'