Street Lighting Tenders

Dismantling of existing U/S PCC/Struts pole of any size & type from its position carefully and removing from the site and necessary excavation and earth work in any soil/strata, demolation of complete concrete from its base foundation, disconnection of conductor/wires/cables/street light brackets/street light of any type fom pole etc. complete all as directed. Note : (a) Old street light fittings retreived shall be deposited to E/M store (b) The rate quoted shall also be deemed to include the cost for making good the existing surface after removal of old poles/debris.

S&F bldg security light light fittings 1x35 Watt LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed.

DSR item no. 8.13.7 LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 10 of the DNIT).

Title2 LED Street Light 45 Watt CG,Havells,Philips

Supply and fixing in repairs of flexi strip trica ac led tricolour strip light street light for poles with optimum brightness and uniformity for perfect cove light, IP-65, 120 LED/mtr with rated input power 8W per meter, LED Driver : AC Adaptor, input voltage 220-240V AC, frequency 50 Hz, Power factor, Protection open circuit LED reverse polarity, surge withstanding 2.0KV CCT 3000K/4000K/6500K suitable for working temp 0 to 100 degree Celsius and also protects against harsh environment outdoor complete all as specified and directed.

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy≥105 120 lm/Watt) Supplying of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).