Street Lighting Tenders

S/F of Decorative article on Pole for Beautification of Street Light and Decorative outdoor LED suitable for installation on existing Street Light Pole. The Design of luminaries shall be in the peacock shape, Namaste shape, Gada Shape, Vishwanath Temple shape etc. both facing side of pole having total size not less than 1150mm X 1150mm made of MS Frame with GI coating, Total power consumption of both sides of 50-180 watts depending on the design , made with Silicon Rubber and Silicon Endcaps of IP67 rating (Certificate attached of NABL Approved Laboratory) with High quality LED strips using Bridgelux LED with stainless still clamp, Nut bolt, Copper Cable 4sqmmX3Core, CE certified LED strips inclusive all material of labour part and inclusive of all taxes

Dismantling of old light fittings and fixing, connection and commissioning of new out door LED Flood light / Street Light fittings on High Mast Tower / Pole / Structure / surface with suitable arrangement including transportation of released fittings from site to stores. ( LED outdoor light fitting will be supplied by Railway ) Above/ Square

36 watt LED street light fixture with integral driver and secondary lens (IP 66):-

Supplying, installation, testing and commisioning of 50 watt LED street light with new generation energy saving and environment long life versatile powder coated die cast aluminium, IP 66, luminaire efficacy > 100 lm/W, CCT 5700K, CRI > 70, THD 10%, built-in surge protection 4 kV, External Surge Protection 10 kV, Power factor > 0.95, IK07, the driver should be potted, capable to withstand 440V for 8 Hrs with high power LED light source with secondary lens complete etc. As required housing reflector and enclosed with toughened glass complete with all accessories.

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 45 Watt

Dismantling one ordinary street light/CFL/LED fitting from existing pole cleaning, rewiring, repairing/replacing the holder, changing bulbs and refitting the same in position and giving connection.