Loading
Loading…
Loading…
3,911 results • Best match
Octagonal pole with light
Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) 10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current 750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . LED Street Light fixture with Minimum lumen output 15000 lm
Re Tender for the Supply of Electrical Materials to all the Factories of TANTEA
45 W street Light with lightning protector (LED)
Electrification Lt and Ht Line Near Vinod saket House Ward No 37
Fixing of LED Street Light40 Watt Manually by Human Force Through Proper Heighted Ladder Along With The Required Safety Measures Required for Fitting Street Light
Design construction supply erection and commissioning of Sewage Treatment Plant with a capacity of 1 MLD ASP Technology Manamadurai municipality along with Ten years of O and M on DBOT basis
Providing Yard Lighting system, Street lighting system, as per specification for entire plant with all accessories, MCB, Switches, luminaries, street lighting, including supply and fixing of poles and tower light of 10m height with necessary lamp twin fitting 8 nos. including foundation work, cabling controlling etc. complete, and street light fitting, cables, S.S control panel etc complete etc complete as per specification
REPAIR/ MAINTENANCE OF EXTERNAL WATER SUPPLY, DISTRIBUTION LINES AND CERTAIN CONNECTED WORKS AT TICCA AND 2T DET GEMINI AREA UNDER AGE(I) DALHOUSIE
Supply and fixing LED Street light fitting 35/45watt 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant includng thermal management in multiple optic complete with IP 65/66 protection complete, all as specified and directed by Engineer-in-Charge.
Electrical installation and Casing-Capping wiring work at Kashipur Quarter within Kashipur 33/11 KV Sub Station under Raghunathpur Division
Supply and fixing 30 watt LED street light with angle bracket from wall.