Loading
Loading…
Loading…
36,891 results • Best match
Purchase/supply of 50/60 watt LED lights for operation/ maintenance of street lighting system within the Municipal Council area Dindori.
LED Light 50 Watt
Maintenance of street lighting on various roads in various Sectors at U.T Chandigarh (Replacement of existing defunct LED street light fitting, LED flood light fittings, switchgear, burnt out cable, casting of cement collar and painting of pole on Ka
DSR item no.8.13 LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K(As per ANSI Bin), SDCM(Standard Deviation Color Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
LED Street Light, 100 Watts, 230 V AC, 50 Hz Protection Class IP67 Or Better Warranty: 2 Years, LED Street Light Of 30 Watts, 230 V AC, 50 Hz Protection Class IP66 Or Better
LED Street Light
LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5/Section 3) (Q3), Terminal Ends for Aluminium Conductors of Insulated Cables (Compression Cable Lugs) Conforming To IS 8309 (Q3), PVC Insulated Unsheathed Cable with Flexible Conductor as per IS 694 (Q2), PVC Flat Cable, Aluminium Conductor with PVC Insulation and Sheath as per IS 694 (Q3), Copper Conductor with PVC Insulation and Sheath as per IS 694 (Q3), Cord flexible 3 core copper 0.75 sqmm, Cord flexible 3 core copper 1 sqmm, PVC Flexible Twin Twisted Cable 23.0076, PVC Flexible Twin Twisted Cable 40.0076, Cooper Fuse wire 10 Amp, Cooper Fuse wire 15 Amp, Cooper Fuse wire 20 Amp, Cooper Fuse wire 30 Amp, Cooper Fuse wire 40 Amp, Cooper Fuse wire 60 Amp, Cooper Fuse wire 100 Amp, DO Fuse Element 10 Amp, DO Fuse Element 20 Amp, DO Fuse Element 30 Amp
LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5/Section 3) (Q3)
Mtc of street lighting on various roads in various sectors at UT Chandigarh. (Replacement of existing defunct LED street light fittings, LED flood light fittings, switchgear, burn out cable, casting of cement collar and other allied accessories on zo
DSR item no.8.13 LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K(As per ANSI Bin), SDCM(Standard Deviation Color Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
Lighting system/street LED light installation work on the road on all three sides from the intersection in Mujpuriya village, Gram Panchayat Palunda
Lighting system/street LED light installation work on the road on all three sides from the intersection in Mujpuriya village, Gram Panchayat Palunda (ITEM WISE RATE AS PER ATTACHED G SCHUDLE )