SUPPLY OF ELECTRICAL GOODS/EQUIPMENTS Tenders

66 Shut-down of electric supply If The contractor is required to take the shutdown of electric supply, day-to day basis, before commencement of work for the purpose, he has to obtain a permit from factory (E Section) every day in prescribed Proforma and discharge the same after the end of the day work (The shut down can be given between 8.30 A.M. to 4.00 P.M. on all working days). All Safety precaution will be taken by the contractor with regard to safety of workmen working at height on the poles to avoid any electric or other accidents. SELECT

Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specific...

2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP-66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC-60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source - LED Streetlight 150 W NO 120.000 120.000 14705.00 0.00 1764600.00 0.00 Rs. 1,764,600.00 30% 30% 40%

transmission and distribution pipelines, valves, pumping machinery & electrical equipment etc. for the

Supply of Electrically Operated Lifting Barrier complete set suitable for 24V DC, supply with hand generator back up & motorized boom locking arrangements as per RDSO Spec. SPN/208/2012 with latest amendment. One set consisting of 2 nos. of lifting barrier pedestals, each with 8 contact circuit controller with top roller type limit switches, hand crank, 2 electric motors, 24vdc of capacity suitable to operate barriers up to 32' long booms, 2 nos. of octagonal booms of 32 feet length with 2 nos. Stop boards, boom light boxes, MS counter weights and 2 nos. of boom support with motorized boom locking but without fringes along with control panel with buttons and indicating lamps, motor connectors and MCB and hand generator (24VDC) to operate 2 barriers of 1 set. This includes supply and installation of gate hooter - 1 no and Dual Tone Bell /Buzzer with 18 Flasher arrangement and 20-Watt horn working on 24 V DC/ 110 V AC (as specified in Tender Document)- 1 no with all fixing arrangements. All of the above items including supply of nuts & bolts, foundation as required & supply of cement, civil work materials and etc. Shall be done by the contractor for commissioning. Only 230VAC supply shall be arranged by the railway in nearby relay room. The complete electric lifting barrier set shall confirm to RDSO SPEC NO. RDSO/SPN/208/2012 Ver. 2.0 Amdt. 1or latest amendment. along with Spares & tool kit mentioned in RDSO Spec. SPN/208/2012 clause 10.1 & 10.2 as below - Following spares shall be supplied along with each set (02 nos.) of Electric lifting barrier as per requirement of the purchaser i) Octagonal boom - 1 no. complete. ii) Belt - 1 no. iii) Crank handle - 1 no. iv) Motor Contactor - 1 no. v) Motor protection MCB- 1 no. vi) Push button complete- 2 nos vii) Limit switch - 3 nos. (1 lever type and 2 top roller type) viii) Fuses used - 2 sets - Tool kit consisting of standard sizes of wrench / spanner and Allen keys should also be supplied with each set (02 nos.) of Electric Lifting barrier.

Supply, commissioning of 36W, 2'X2' recess mounting Indoor LED fitting, IP-20, 50000 burning hours, PF= >/=0.90, Beam angle: >/=120 degree, Color=6000K, 120 lumens/w (minimum), protection from short circuit, over load, over voltage and surges of reputed make: Philips, Bajaj, CG, Eveready, Wipro, Jaquar with a minimum warranty period of 2 years [Price includes supply & installation etc. of fittings on ceiling with required hardware and fasteners and making electrical connection to make the light functional but except point wiring] :- --- The price also covers the cost of supply, erection, testing and commissioning of 36W, 2'X2' recess mounting Indoor LED fitting, IP-20, PF= >/=0.90, Beam angle: >/=120degree, Color 4500-6000K, 120lumens/w (minimum) of reputed make: Philips, Bajaj, CG, Eveready, Wipro, Jaquar with a minium warranty period of 2 years [Price includes supply & installation etc. of fittings on ceiling with required hardware and fasteners and making electrical connection to make the light functional but except point wiring] The price shall cover the cost of all materials required for the above work including labour charges. Before supply of materials, contractor has to take approval from Sr.DEE(G)/WAT or his authorized official. WALTAIR DIVISION-ENGINEERING/ECOR