Telecom, Networking & OFC Tenders

Supplying, installation, Testing and commissioning of following capacity 8 port Non POE Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

Supplying, installation, Testing and commissioning of following capacity 8 port Non POE Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

Supplying, installation, Testing and commissioning of following capacity 8 port Non POE Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

SITC of Central Conference control unit, shall operate on AC 100–240V, 50/60Hz power supply and provide a frequency response from 20 Hz to 20 kHz, signal-to-noise ratio shall be greater than 96 dBA and total harmonic distortion shall remain below 0.05%, equipped with one USB recording connector, four or more DIN-8 input connectors, and four or more RJ45 group connectors. It shall include RS-232 (3P) connectors for both central controller and camera switch, and optionally support HDMI 4×1 video input. Camera control shall be provided through a 6P connector, while computer connectivity shall be available via USB and RJ45. The built-in alarm integration interface shall consist of two 2P connectors (5V plus Audio), Audio input shall be supported through one 2P unbalanced connector and one RCA unbalanced connector and output shall include one 3P balanced connector, two 2P unbalanced connectors, one XLR balanced connector, one 6.35 mm unbalanced connector, one RCA unbalanced connector, one coaxial connector, and one optical fiber connector. The unit shall also incorporate a sound card with USB and RCA (unbalanced ×2) interfaces, shall be built on advanced digital processing with inbuilt digital signal processor for better audio output and transmission technology, fully compliant with IEC60065 international standards with powered by a 1.4 GHz industrial-grade embedded processor with 1 GB memory to ensure high-speed performance and smooth system response system scalability, Touch screen: 4.3-inch or bigger full-view IPS capacitive touch screen, accommodating up to 240 units per host interface and a total system capacity of 76,800 units, with flexible connection methods. Leadership control shall be unlimited, with configurable speaker limits from 1 to 20 and no restrictions for chairman or VIP units with eight intelligent conference modes including FIFO, LIFO, quantity limit, chairman permission, voice activation, timed speech, queuing, and free discussion, ensuring adaptability to diverse meeting styles. Camera integration shall support PELCO-D/P, SONY, SAMSUNG, and other protocols, with tracking, preset positions, RS-232/RS-485 control, and HDMI/SDI matrix switching for cameras, etc. complete required as per specifications. Approve Make: Byerdynamic/ AudioTchnica/ Clarilus

internet bandwidth and any other required equipment to carry out the PoC.

Fiber optic laser tip (cable loop)