Loading
Loading…
Loading…
925 live465 closing this weekmost from North Western Railway and Department Of Military Affairs
925 results • Latest
Aluminium Foil for Various packaging
Robotic Reconditioning of WCMS Crossings, Thick Web Switches, Scabbed Rails, and Wheel Burn Locations in the jurisdiction of CGM/Ajmer Unit.
Hose connection for half inch ( 12.5 mm bore ) ( with washer at both ends ) to drg. no. EM U/M-3-5-079 Alt.-s/2, item no. 2. Coll-III. Matl.&Spec. As per drg.
Lower bearing support with bush for ICF coach to ICF drg. no.MG/T-5-2-002 alt-t/3 col-III, item no. 1,2 &3 in assembled condotion .
Construction of Link Taxi Track, Re-alignment of Portion of Perimeter Road and Boundary Wall and allied works at Kishangarh Airport
Short Term License Under Stop Gap Arrangement) for Snack Bar Counter in Terminal Building (Security Hold Area), SHA at Kishangarh Airport, Ajmer-305801
MOTOR PROTECTION CIRCUIT BREAKER (MPCB) FOR COMPRESSOR UNIT AND HEATER UNIT, CURRENT RATING 7-10 AMP, THERMAL RELEASE RANGE 10-16 AMP, CLASS-10, BREAKING CAPACITY 10KA, 3-POLE, VOLTAGE RATING 415 V AC, CONFORMING TO IS/IEC 60947-2; CONFORMING TO RDSO SPEC. NO. RDSO/PE/SPEC/AC/0184-2015 (REV. 1); SUITABLE FOR USE IN SWITCH BOARD CABINET OF LHB TYPE AC COACHES. ACCEPTED MAKE & CAT. /MODEL NO.: RDSO- APPROVED MAKE AND MODEL AS PER SERIAL NO. 39 OF RDSO LETTER NO. EL/7.1.108/MSSBC DATED 17.09.2021 OR ANY OTHER RDSO-APPROVED MAKE
AOH REPLACEMENT KIT FOR SCHNEIDER ELECTRIC MAKE SINGLE BOTTLE VCB TYPE 22CB AS PER SCHNEIDER ELECTRIC
Maintenance kit 02 for earthing equipments consists of 5 items
Jungle Boot IS 17861: 2022 (Direct Injection Process) as per CAPF specifications (Q1) (3 (3 ))
Spring Lock Washer of Nom. Size 1-1/4" (Item No. 14) to DLW Drg. No. TPE-13- 0022, Alt. s/nil
E- TENDER DOCUMENT FOR Security Personnels THROUGH Registered by Rajasthan Cooperative Department
Drainage improvement works at various RUB'S 69,79,72,81,147,151,155,158 etc in ADEN/Falna and ABR sub division.
Ajmer Division:- Provision of Optical Fibre management system for Monitoring and reliability improvement in Jurisdiction of ADSTE /UDZ in Ajmer Division.
Ajmer Division: Augmentation and upkeep of various components/parts of AFDAS (Automatic Fire Detection and Alarm System) M/s RAVEL make in connection with RDSO TAN 3009 at various stations of Ajmer division.
Ajmer Division: Augmentation and upkeep of various components/parts of AFDAS (Automatic Fire Detection and Alarm System) M/s NOTOFIRE PRIVATE LIMITED make in connection with RDSO TAN 3009 at various stations of Ajmer division.
ACETONE as per IS:170-2020 (5th revision) for dipping the Balancing Weights for cleaning purpose.
INDUSTRIAL VINEGAR (SYNTHETIC VINEGAR) WITH ACETIC ACID CONTENT
Set of bracket for water Filling Assembly for LHB Coaches
Set of Pins (Electroplated) Item No. 1 to 7 as per ICF Drg. No. EMU/M-3-2-065, Alt a/nil (One set consists of 96 pins as mentioned in the drawing) [1] Pin dia 40 x185 mm = 08 Nos. [2] Pin dia 40 x 144 mm =16 Nos. [3] Pin dia 40 x 131 mm = 8 Nos. [4] Pin dia 40 x 92 mm = 8 Nos. [5] Pin dia 28 x 63 mm =32 Nos. [6] Pin dia 40 x 102 mm = 08 Nos. [7] Pin dia 43 x 280 mm =16 Nos.
General purpose relay type CS3C-40E-12 VDC Conforming to CGL Part No. 785232020 or M/s PS Enterprises part No.PS/GPR/0785232021 or M/s SUGO Industries part No.S107852320200 suitable for 1400HP DEMU/DPC
Arm rest top suitable for 2nd AC LHB chair car to drg. no.SKT/2017/5/C Alt-1.
Traverse Beam, Confirming to Plasser Part No. 64.09.1207, Acceptable Make/Brand: Plasser or Equivalent
Hydraulic Rail clamp Cylinder Complete with seal kit for Duomatic
1)BODY FLANGE OF MAGNETIC LEVEL GAUGE ASSE. 2)MAGNETIC LEVEL GAUGE CAP WITH CHAIN.
Locking Plate for Direct Mounted Roller Bearing Arrangement
XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)
"Comprehensive Bridge Maintenance of all Important, Major and Minor Bridges in jurisdiction of CGM Ajmer Unit"
SPL REPAIR TO OR MD ACCN (ROOF TREATMENT) EXTERNAL PLASTER AND CERTAIN CONNECTED WORKS IN BLOCK P-104(08 QTR),P-96(08 QTR) AND P-239(03 QTR) AT RA LINE-I OF AB-03 AND P-162 ( 06 QTR),P-245(04 QTR) AND P-248(02 QTR) UNDER GE NASIRABAD.
HIGH TENSILE RUSTLESS STAINLESS STEEL PIN (DIA 10MM) R.I. NO. 161-S CONFIRMING TO RE DRG. NO. RE/33/P/160 MOD-A & RDSO specification no. TI/SPC/OHE/ FASTENERS/0120 Rev. 1
REPAIR/RESURFACING OF ROAD, CULVERT FOOTPATH, HARDSTANDING, ROAD FURNITURE AND CONNECTED MISC WORKS AT NASIRABAD AND AJMER STN IN THE AREA OF AGE B/R-I UNDER GE NASIRABAD
CATENARY WIRE ENDING CLAMP (65) COMPLETE WITH ID NOS. 1121, 1092, 1094 & FASTENERS AS PER RDSO DRAWING No. ETI/OHE/P/1120 REV. B AND RDSO'S SPEC. No. TI/SPC/OHE/Fittings/0130(10/13) REV. 1
Contact wire splice toothed type with fasteners as per RDSO assembly Drg - No ETI-OHE-P-1080 -1 Rev - B & part Drg no ETI-OHE-P-1081 - 1 Rev-C and RDSO'S specification No. TI/SPC/OHE/Fittings/0130(10/13) REV. 1 (Complete set of contact wire splice are consist of 02 Nos. contact wire splice part and 08 Nos. stud bolts.)
Disposable Sterile Crescent Knife (Bevel Up) 2-2.5mm (Alcon, BD, KAI, Sharp point
A drop-in charging adapter compatible exclusively with the surgical clipper's lithium-ion battery, allowing for an upright charging and storage position. The charger is designed to be easily wall- mountable and includes an indicator light to show charging status.
A disposable, Surgical purpose clipper blade with a width of 37.2 mm and a fixed cut height of 0.23 mm, designed to remove all types of body hair with a single pass while maintaining skin integrity. The blade is compatible with the BD surgical clipper handle and is suitable for both wet and dry conditions.