Loading
Loading…
Loading…
6,779 results • Latest
Repair and Maintenance work in Residential Building of Police Thana Roopangarh
Construction of Store Room and Repair work at DTO kishangarh
Repair and Maintenance work at BSO Office Kishangarh (Silora)
Pallet Truck (V3) (Q2)
Provision of ILS at Kishangarh Airport, Ajmer. SH Electrical works related to Aerosol based Fire Extinguishing System and Addressable Fire Alarm and Detection system.
DUSTER COTTON KHADI BLEACHED SIZE 30 X 30 CMS, TO IS : 3777/2019 REV-2 AMNDT 1. WITH " IR" TOTEM TO BE MARKED WITH INDELIBLE INK ON EACH CORNER.
Patch Repair work on Jaipur-Bhilwara Road (SH-12) from chainage 170/00 to 195/00
Patch Repair work on Jaipur-Bhilwara Road (SH-12) from chainage 108/00 to 170/00
Patch Repair work on Jaipur-Bhilwara Road (SH-12) from chainage 72/00 to 108/00
Paint black japan type-B.
24 VOLTS 50 AMPS ALTERNATOR For 1600 HP DEMU DPC TO CIL PART NO. 3640732 or Prestolite part no. 8SC3068V
FRONT PLATE FOR SCHAKU COUPLER TO ESCORT PT.40.586.06.02 (4)
DUSTER COTTON ORD.KHADI & SPUN HAMMED SI
Latanoprost 50mcg +Timolo 5mg per ml eye drop Eye Drop Minimum 2.5ml
Electric Motor with clutch set.
SET CONSISTS OF (1) M.S. TEE 15 mm, 04 Nos. (2) M.S. ELBOW 15 mm ( MALE / FEMALE),04 Nos. (3) M.S. PLUG 15 mm , 04 Nos. (4)M.S. HEX NIPPLE 15mm ,10 Nos confirming to IS:1239/2011 Part - II Amndt.5.
WAX COATED PAPER MASKING TAPE TO SIZE-1.5" WIDE X 60 METER LONG IN ROLL TO RCF SPEC. NO. PST/2326/ SPEC / MT /REV 02.
HIGH TENSILE STUD SIZE 22X100MM
Set of Pull handle to the item no. 7,8 and 9 in assembled condition with item no. 6 as per RCF drg. no. LW54138 Alt.d.
DOUBLE INLET CENTRIFUGAL BLOWER, 190V AC, 3-PHASE, 50HZ FOR EXHAUST FROM LAVATORIES FOR LHB NON-AC COACHES. AS PER RCF SPECIFICATION No.: EDTS-432, REV-'NIL' WITH CORRIGENDUM NO.1.
Construciton of Culvert on MDR 155 Chikalya to Peeplaj Ch 65/900 / BA/26-27/30 Cr/Kekri/02
Construciton of Culvert on Gordha to Chikalya Road Ch 0/530 BA/26-27/30 Cr/Kekri/01
Work related to sanitation waste collection and the removal of jhandiya babul trees in Wards 1 to 20 of the municipal area.
Contingencies of various works under Ajmer Central Division. (SH:- Providing Inspection Vehicle for the office of Executive Engineer Ajmer, CPWD Ajmer) (Ist Recall)
NRO at location within 1 KM of Defence Grah Nirman Sahakari Samiti Ltd colony Gate on Khade Ganesh Ji Bandadhar Rampura Road district Kota under Ajmer DO
PVC Insulated Unsheathed Cablewith Flexible Conductor ISI Marked To IS694 (Q2)
MORSE CENTRE MT2 WITH FLATS, CT CENTRE MT6 90 DEGREE, CT CENTRE MT6 WITH LUB HOLE CT 40 CENT, LIVE CENTRE MT 6 TIP 90 DEGREE, LIVE CENTRE MT 6 TIP 60 DEGREE, HALF DEAD CENTRE MT 3 C.T., CT MORSE CENTRE MT5
AIR CIRCUIT BREAKER, 3 POLE, 800 AMP, 750V, 50HZ, CN-CS800C, WITH 6 NO + 6 NC, OPEN AIR EXECUTION, THERMAL MAGNETIC MV VOLTAGE RELEASE DN1E, FIXED TYPE, MANUALLY OPERATED, CONFORMING TO RCF SPECIFICATION NO. EDTS 103 REV-D, AM-7, SUITABLE FOR USE IN CONTROL PANELS OF RAJDHANI / SHATABDI TRAIN'S LHB POWER CARS. ACCEPTED MAKE: Lauritz Knudsen Electrical Automation (formerly L&T), ABB & GE, AS PER SR. NO. 5 OF BOM OF RCF SPECIFICATION NO. EDTS 103 REV-D, AM-4, OR ANY RCF/RDSO APPROVED MAKE.
M.S. channel 6 feet x 3/4 inch x 3/4 inch x 1/16 inch.
Dustbin to drg. no. SKT/2023/10/C Rev-1. As developed by Ajmer carriage workshop.
Repair and Renovation work at Executive Trainee Hostel, M.D.S. University, Ajmer
Construction of Samudayik Bhawan Near by kalyaneshwar Mandir in public place under MLA LAD Scheme
Repair and Maintenance of Aanganbadi Building at Kohada under MLA LAD Scheme
Pipe Bracket for APM to KBI Part no. II90520.
Bracket for locking bolt to RDSO drg. no. WD-08008-S-7 Alt-5 , item-2.
PVC GROMMET (THREADED TYPE) 50 MM DIA
SYNDESMOSIS REPAIR SET 1
CUT OUT COCK 3/8" (WITHOUT VENT) NPT-NPT TO DRG.NO.SKDP-2877, ALT.5.
SWITCH FLUID LEVEL (LOW WATER SWITCH) CONFORMING TO CIL PART NO.4084367 OR SWISS JA PART No. SJ-175-067 FOR 1400 HP DEMU DPC"
OVERHAULING KIT FOR DUMP VALVE OF ESCORT KUBOTA MAKE CONSISTING-12 ITEMS FOR LHB COACHES. (Item list enclosed)
RUBBER PAD 240X210X18 MM MADE OF POLYCHLOROPRENE RUBBER COMPOUND GRADE 'F' CONFORMING TO PROPERTIES AS LAID DOWN IN CLAUSE NO. 3.2.4.1 AND CLAUSE NO. 3.2.4.2 OF IRS: R48-88 SPECIFICATION, SHORE HARDNESS: 70+/- 5, & COLOUR SHOULD BE BLACK. COMPANY'S NAME SHOULD BE TRANSFER PRINTED OR MOULDED 0.5 MM DEEP. MONTH & YEAR SHALL BE EMBOSSED BESIDES COMPANY'S NAME, CONFORMING TO RDSO DRAWING NO. SKEL 4021 ALT- 2. SUITABLE FOR USE IN AXLE PULLEY OF 18/25 KW BRUSHLESS ALTERNATOR OF AC COACHES.
Revolving Chair (V5) (Q2)