Medak Tenders

NAME PLATE AS PER SKETCH NO: SK-214-86-0026

Miner's Safety Goggles (V2) Conformingto IS14352 (Q3)

TURRET ELECTRICAL EQUIPMENT TO 675-95-SB3 KIT" B" AS PER ENCLOSURE. QAI NO. CQA (ICV) QAI/037 USE LCSO

Handheld Nozzle Pistol Grip Type (Q3)

WASHER 5T 65G 05 TO GOST 6402-70, COTTER PIN/SPLIT PIN 2X12.019 GOST: 397-79, SPLIT PIN 3.2 X 20 TO IS: 549, ZINC PLATING 9 MICRONS THICK

STEEL ROUND BAR TO DIA 8 X 6000 MM OR IN STD. LENGTH TO CONDITION‘ ANNEALED’ TO IS: 280-78.

CONSTRUCTION OF 1 DSP AR QUARTER, 1DSP ADMIN QUARTER, 2RI QUARTERS AND 4RSI QUARTERS AT MEDAK DISTRICT. SUB WORK:- CONSTRUCTION OF COMPOUND WALL AND LAYING OF CC ROAD FOR 8 NOS QUARTERS AT MEDAK (2ND CALL)

Manpower Outsourcing Services - Minimum wage - Highly- Skilled; Diploma; Healthcare

FDR- Permanent Restoration of bund of JalaKunta, Alladurg(V), Alladurg(M), Medak District Invited under earmarked works SC communities are only eligible to participate

RADIATOR& COOLERS 765-03-K6 CONSISTS OF COOLER OIL VEHICULER 765-03-CB161, WATER RADIATOR 765-03-CB17

Wooden dining table

PERISCOPE ARMOURED VEHICLE TNPO-170 A (WITHOUT RECEIPTACLE) CAT/PT NO. V5/1240- 002401, DRG NO. AU3.

PHOSPHOR BRONZE SHEET ROLL, Gr: 52100

CONTROL CARD (SMART HEAT V-1.0-12 CONTROL BOARD) FOR STEADFAST F/C (OFMK: 4979, 4979A)

FORGED UPPER RACE RING TO DRG. NO: 675-57-276

STEEL SHOTS SIZE: 1 MM DIA CONFORMING TO IS: 4606- 1968

APOLLO 600-16 SIZE TYRES WITH TUBES-2NOS & APOLLO 13.6-28 SIZE TYRES WITH TUBES-2NOS (TOTAL 1SET) FO

FILTER PAPER OF SIZE: 750 MM WIDTH X IN ROLL OF STD LENGTH

9P5605015 CASE FOR EP

SS 321 Tube, size: OD 6x1 mm thick, Gr: MIL-T8808, Make: Sandvik/Tacalemit

COVER 765-05-369 AS PER EXTRACT QAI/RUBBER/CQA(ICV) 005 DEC. 2003, GASKET TO DRG. NO. 675-50-213 TO SPEC. SPONGE RUBBER GROUPII TY38-105867-75, AS PER EXTRACT: QAI/RUBBE

FORGING TUBE TO DRG. NO. 765-33-51K AND DULY MACHINED AS PER PROCESS CHART DRG, ENCLOSED

PLUG TOP 6AMPS 3 PIN 250VOLTS. CAT. CODE: 3982 MAKE: CROMPTON/CONA/BAJAJ/HAVELLS/ANCHOR.

INDEXABLE INSERTED TYPE DRILL DIA. 16, 18, 19, 20, 21MM, L/D-3 STANDARD DIA. (TOTAL 5 DRILL BODIES) EACH 01N

H. S. S CENTRE DRILLS TYPE 'A' AS PER IS: 6708-1977 PILOT DIA: 2.5MM, BODY DIA: 6.3MM.

S. C P/S END MILL DIA 4.0X4X12X42, P-40

THROW AWAY INSERTS FOR EXTERNAL AND INTERNAL GROOVING TOOL HOLDERS. INSERT WIDTH 4.0MM, GRADE 'TTS'(

’ RIM’ FORGING TO DRAWING NO: 675-73-270 FULLY MACHINED AND FINISHED CONDITION AS PER DRAWING.

GASKET TO DRG. NO. 765-50-2597 TO SPEC. SPONGE RUBBER GrII TY No. 38-105867-75, AS PER EXTRACT QAI/RUBB

TURNING TOOL HOLDER TO ISO DESIGN: MVJNL 2525M-16 QTY. 1NO & INSERTS DESIGN: VNMG 160408, GRADE P30(COAT

INFRASTRUCTURE FACILITIES TO TAKE UP VARIOUS WORKS FOR THE PROPOSED TELANGANA PUBLIC SCHOOLS (TGPS) FOR IMPROVING LEARNING OUTCOMES FROM PRE-PRIMARY (PP) TO CLASS XII AT ZPHS KUKUNOOR, YELDURTHY (M) MEDAK DISTRICT

INFRASTRUCUTRE FACILITIES TO TAKE UP VARIOUS WORKS FOR THE PROPOSED TELANGANA PUBLIC SCHOOLS (TGPS) FOR IMPROVING LEARNING OUTCOMES FROM PRE-PRIMARY (PP) TO CLASS XII AT GOVT. HS (BOYS), MEDAK, MEDAK (M) MEDAK DISTRICT

Construction of Third Floor over the existing G+2 Floors Court building at medak district. Sub work :Providing Air Conditioning

HOSE for FUEL 40Y8 1.3 (13) TY 005.6016-80 L= 70+/-2.5 AS PER QAI/RUBBER/CQA(ICV)/002 AUG. 2003, HOSE TO DRG. NO. 765-07-13 AS PER QAI/RUBBER/CQA(ICV)/005 DEC. 2003, HOSE TO DRG. NO. 765-07-24 AS PER QAI/RUBBER/CQA(ICV)/005 DEC. 2003, RING TO DRG. 765- 56-26, HOSE TO DRG. NO. 765-78-717 AS PER QAI/RUBBER/CQA(ICV)/005 DEC. 2003

SPECIAL END MILL DIA. 32MM SIMILAR TO KYOCERA ORD. NO. MA90 -32S32-12T3C (CUTTER BODY) QTY. 1NO, R3 RADI

ISO 50 (ADAPTORS) TOOL HOLDERS & EXTENTION ADAPTORS COSISTS OF SEVEN TYPES OF HOLDERS FOR HMC-1000MA

SET OF ROUGH BORING BAR(3EDGE) DIA. 80MM (THROUGH COOLANT) -1 NO. ALONG WITH INSERT CCMT120408-PM 4425

DEPRESSED CENTER GRINDING WHEEL, SIZE: DIA. 125 X THICK: 7X B. D. 22.23MM, H. I. CUT USE FOR MAX. OPERATING

PERISCOPE ARMOURED VEHICLE TNP-350B CAT/PT NO. VS/1240- 002402, SPECN NO: TY3-3-1000.83 DRG NO. AU2.

PERISCOPE ARMOURED VEHICLE TNPT-1, CAT/PT NO. V5/1240- 002416, DRG NO. AU3.895. 041, SPECN NO: TY3.3

M35 (HSS WITH 5% COBALT) GROUND THREAD HAND TAPS, SIZE: M14X1.50 AS PER IS: 6175-77

GLASS PROTECTING ELECTRO-HEATED SE-1 DRG NO: AU4- 496-008, TY3-3.1003-74 DS CAT NO. V5/1240-002-403.

SOLID CARBIDE CENTRE CUTTING PARALLEL SHANK END MILL GRADE OF THE CARBIDE: P30, CUTTING EDGE DIA: 10 M

Manning,Operation and Maintenance of Ph-III 150 MLD Water Treatment Plant at Peddapur for the period of one year under Peddapur Section, SD-II Peddapur, Transmission division-II, Patancheru.

11.0 Mtrs/365 Kgs PSCC Poles to Various Circles of Medak Stores

HIRING OF SEDAN VEHICLE FOR D2C-OFMK FOR DAY TO DAY ACTIVITIES

GASKET 765-50-878, SPEC: TY38-105867-75, AS PER EXTRACT QAI/RUBBER/CQA (ICV)/004 OCT. 2003., BUFFER TO DRG. NO. 765-50-1552, SPECN 4-16 TY005216- 75 AS PER EXTRACT QAI/RUBBER/CQA (ICV)/005 DEC. 200, RETAINER PACKING TO DRG. NO. 675-57-354 TO SPEC. SPONGE RUBBER CB-105 TY005216-75 AS PER EXTRACT QAI/RU, BUFFER 765-69-29 AS PER SPECN. EXTRACT QAI/RUBBER/CQA(ICV)/005 DEC. 2003

Puf Diaphragm (8.8mm Thickness)

FORGING“ BUSHING” TO DRG. NO. 765-50-2276 IN FULLY MACHINED AND FINISHED CONDITION

PACKING MATERIAL 765-10-1945 AS PER QAI/RUBBER/CQA(ICV)/005 DEC. 2003, PACKING TO DRG. NO. 765-50-2445 TO SPEC. SPONGE RUBBER CB-105 TY 005216-75, AS PER EXTRACT QAI/RUBBER