Loading
Loading…
Loading…
365 results • Latest
Repairing of existing bituminous road surface at NSIC Technical Services Centre, Kamalanagar, ECIL post, Hyderabad-500 062
EXECUTION OF REPAIRING OF EXISTING BITUMINOUS ROAD SURFACE AT NSIC TECHNICAL SERVICES CENTRE, HYDERABAD
Bifurcation of the existing 11KV Doolapally feeder emanating from 33/11 KV Doolapally SS by erection of new 11KV feeder from the same SS which involves laying of 0.99KM 11KV 3X300sq.mm XLPE UG cable (Single Run) along with bay extension and erection of 1No. 11KV feeder VCB at 33/11 KV Doolapally SS in Kompally Section of Quthbullapur Sub-Division in Medchal Division of Medchal Circle under T and D Improvements to original works (Summer Action Plan-2026) (Reserved for ST ).
Procurement of 40/33 mm Permanently Lubricated HDPE Telecom duct in the drum length of 500 meters and accessories as per RDSO Specificatio
Extension of 11KV HT Supply for Addl load of 500KVA CMD without change in CL over and above the existing 2500KVA CMD with a CL 4000HP making total Load 3000KVA CMD with a CL 4000HP under Cat-IX to M/s. DEPOT MANAGER TSRTC,(MCL3148) at TGRTC Miyapur-II Depot in Miyapur Section of Miyapur Sub-Division in Kukatpally Division of Medchal Circle under Capital Works(Reserved for SC Category).
SPECIAL REPAIRS REPLACEMENT OF OLD UNSERVICEABLE LT FEEDER PILLAR BOXES AND LT CONTROL PANELS AT CERTAIN EM INSTALLATIONS AT AFA HYDERABAD
Supply, install, commissioning & testing of Motor Control Panel "out-door type" of size 900 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories : [ For Watch Tower Borewells ]
Desilting of Nalas in various locations in Ward No.11 Boduppal in Boduppal Circle-10 GHMC for the year 2026-27 (6th CALL)