Nadia Tenders

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator)(But without MCB / RCCB / Isolator) a) 6 way double door

Providing and fixing Mild steel expanded metal 20x60 mm strands 3.25 mm wide 2.24 mm thick with frame of 40x40x6 mm angle iron and using flats 30x6 mm for diagonal braces and central cross piece with providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), all necessary fittings complete, including applying a priming coat of approved steel primer and two coats of synthetic enamel paint complete as per direction of Engineer in charge.

Providing and fixing Mild steel expanded metal 20x60 mm strands 3.25 mm wide 2.24 mm thick with frame of 40x40x6 mm angle iron and using flats 30x6 mm for diagonal braces and central cross piece with providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), all necessary fittings complete, including applying a priming coat of approved steel primer and two coats of synthetic enamel paint complete as per direction of Engineer

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : with ISI marked M.S. pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated hollock wood

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.