West Siang Tenders

4 Leg Twin path round slings with check fast external warning indicator and fibre optic inspection system of 16T SWL, 3.5 meters length as per American Standard- ANSI/ASME B30-9 and international standard ISO4878 along with the following facilities. 1) Polyester Twin path round sling having 20 Ton capacity master O Ring with 2 meters circumference length. 2) Polyester twin path round sling having 2 Nos. 10 Ton capacity Sub O Rings of 1 meter circumference length. 3) Each Sub O ring is fitted with 2 Nos of Twin path round slings with check fast system, overload indicators, Each Sling of Capacity 4 Ton, each 2 Meters effective length and each sling is to be fitted with anti abrasive sleeve at touching points. 4) Each sling is to be fitted with 9.5 Ton capacity of D shackles with Eye hook. MAKE: SIMPLEX or its equivalent.

Set of Stiffener plate with fasteners as per RDSO Drg.no.RDSO/CG/DRG/24034, Alt- 02. Item : 01 (TYPE-01) with pitch between holes (P) =100 + / - 0.5 mm & Hole distance from edge(A)=25 + / - 01 mm) suitable for (OEM-SONA BLW, SANROK, FTIRTIPL OR SIMILAR) Note : (1).Serial number (starting from 01 to till the last plate sl.no) to be punched along with Mfg. details (as per note 08 of RDSO Drg.). (2).Hardness test report (as per note 05 of RDSO Drg. for each plate duly indicating sl.no to be specified, testing must be done by a laboratory which is having approval of National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited certified lab and test reports to be sent along with the material.

Weld Trimmer Power Pack Version For A.T. Welding as per RDSO specification No. TM/SM/9 dt. 16.08.1991 First Revision, 2020 with latest amendments if any. Note: RDSO Approved forms or Authorised dealer with ADC to be submitted along with tender.

ONE COACH SET OF CEILING SHEET ASSEMBLY ALONG WITH FIXING ACCESSORIES FOR LWACCN COACHES AND AS PER SPECN.MDTS-133, REV-05 AND MDTS-118, REV- 01 AND LTR. NO. MD46271, Dt.12/11/03.INDUSTRIAL LOCK TO DRG. NO.LW44158, ALT-d, ANX-1 ,LW44318, ALT-c, ANX-1 CONSISTS OF: 1)CEILING ASSEMBLY IN TRANSVERSE SIDE TO DRG. NO. LE44101, ALT- l-ANX-1 = 9 NOS. 2)CEILING ASSEMBLY IN LONGITUDINAL SIDE (WITH EMERGENCY LIGHT) TO DRG NO.LE44102, ALT- h WITH ANX-2 = 2 NOS 3)LONGITUDINAL CEILING SHEET ASSEMBLY TO DRG. NO. LE44217, ALT- d WITH ANX-2 = 5 NOS. 4)LONGITUDINAL CEILING SHEET ASSEMBLY TO DRG. NO. LE44239, ALT- a WITH ANX-2 = 1 NO. 5)LONGITUDINAL CEILING SHEET ASSEMBLY TO DRG. NO. LE44240, ALT- a WITH ANX-2 = 1 NO. 6)MIDDLE CEILING SHEET ASSEMBLY TO DRG. NO. LE44103, ALT-e = 9 NOS. 7)MIDDLE CEILING SHEET ASSEMBLY TO DRG. NO. LE44104, ALT-g = 7 NOS. 8)MIDDLE CEILING SHEET ASSEMBLY TO DRG. NO. LE44241, ALT-a = 1 NO. 9)MIDDLE CEILING SHEET ASSEMBLY TO DRG. NO. LE44242, ALT-a = 1 NO. AND FIXING ACCESSORIES, WHICH CONSISTS OF: 1) SPACER TO DRG NO. LE 44111, ALT- NIL =27 NOS. 2) SUPPORT BRACKET FOR LHB EOG COACHES TO DRG NO LW44225, ALT-NIL=54 NOS. 3) ALUMINIUM PROFILE(FOR MIDDLE CEILING SHEET)TO DRG NO LE44110, ALT-NIL=56 NOS. 4) SET OF COVER ANGLES FOR LWACCN COACHES TO PLANNING LIST NO. MPLCOA3TL, VER.0 AND AS PER SPECN. MDTS-133, REV- 05 AND MDTS-118, REV-01 AND RCF LTR NO. MD 46271 DT. 12/11/03 CONSISTS OF : a) COVER ANGLE-1, LE44191, ALT-NIL, ANX-1=18 NOS. b) COVER ANGLE-2, LE44192, ALT-NIL, ANX-1=18 NOS. 5) ALUMINIUM EXTRUSION TO DRG NO. LW 44173, ALT-a, LENGTH 5000-mm =9 NOS. 6) ALUMINIUM EXTRUSION TO DRG NO. LW 44114, ALT- c, LENGTH 1950 mm =9 NOS.

AT Welding equipment (Cap pre heating system) Compressed Air Blower Machine fitted with data transmitter technology as per clause 10.1.(iv) of IRS T 19-2021 (ACS 02) the Compressed Air Blower shall have facility to record and save the preheating parameters viz. pressure and time, firm details, welder details and weld location details for a particular weld along with facility to send these preheating parameters and related details automatically as SMS to concerned Railway officials immediately after finishing of preheating. It shall be possible to send this SMS simultaneously up to 10 mobile numbers.

Crank Pin along with Pin and split pins as per RDSO Drg.No. Empty load device IR- ELD-10 WD84074-S-01-RC, Alt.3, Item Nos-6,7,8 &10. (Ref. Drg.Nos for Item No;s 6,7 is WD-84074-S-02 RC, Alt.1, Item Nos.10&8)