Bid publication date
Bid document is dated 05-08-2026.
Loading
Loading…
Loading…
Central Manufacturing Technology Institute · Bengaluru Urban, Karnataka9711177
Written by TenderKart AI from the documents published when it was generated. Check the tender for later corrigenda before you bid.
5 Aug 2026
26 Aug 2026
₹2.6 L
All important dates as they stand after corrigenda: publication, pre-bid/clarification deadline, bid submission deadline, bid opening, and bid validity period.
Bid document is dated 05-08-2026.
Bid End Date/Time is 26-08-2026 17:00:00.
Bid Opening Date/Time is 26-08-2026 17:30:00.
Bid Offer Validity is 90 days from the bid end date.
No pre-bid meeting date or pre-bid clarification deadline is stated in the bid documents.
Delivery timeline is stated inconsistently: 15 days in the bid consignee table versus 8 to 10 weeks from Purchase Order in the buyer technical specification ATC.
Tender value or estimated cost, EMD/bid security (amount, acceptable forms, validity), tender document fees, performance security, and key payment terms.
No tender value or estimated cost is stated in the bid pack.
EMD is not required.
ePBG / performance bank guarantee is not required for this bid.
No tender fee is prescribed; GeM disclaimer treats seeking tender/bid participation fee as invalid.
Buyer ATC: payment 30 days after delivery and acceptance against a valid tax invoice (overrides default GeM 10-day CRAC payment).
MII purchase preference up to L1+20% for up to 50% quantity; MSE purchase preference up to L1+15% for 25% quantity.
Option clause allows ±25% quantity variation at contracted rates.
Every pass/fail eligibility and qualification requirement: experience and past performance, turnover/net worth, registrations and certifications, consortium/JV rules, and debarment or blacklisting conditions.
Only Class-I and Class-II local suppliers may bid; non-local suppliers are not eligible (eligible MSEs still allowed to participate).
No MSE or Startup relaxation from years of experience and turnover is granted.
MSE preference is available only to MSE manufacturers/OEMs with valid Udyam validation; traders/resellers are excluded from MSE preference.
Any bidder from a country sharing a land border with India is eligible only if registered with the Competent Authority; false declaration can lead to immediate contract termination and legal action.
All bidders must comply with CMTI Integrity Pact and upload a signed scanned copy with the bid; non-submission leads to disqualification.
Bidder must declare no previous anticorruption transgressions in the last 3 years with other companies/government/CPSEs that would justify exclusion; incorrect statements can lead to disqualification or banning/holiday listing.
Seller must furnish OEM Authorization Certificate and compliance of BoQ specification with supporting document.
What is being procured: the work, supplies or services, deliverables and quantities, locations, phases, completion or delivery timelines, applicable standards, and notable exclusions.
Procurement of 1 Digital Storage Oscilloscope (goods) for CMTI Bengaluru.
Bench-top 4-channel DSO with built-in DVM, 500 MHz bandwidth, ≤0.7 ns rise time, up to 2.5 GSa/s single-channel sampling, 12-bit or better vertical resolution, up to 100 Mpts memory, ≥10.1-inch touch display.
Consignee location is Central Manufacturing Technology Institute, Tumkur Road, Yeshwanthpur post, Bengaluru 560022; Consignee/Reporting Officer S Stalin Kumar; quantity 1.
Bid consignee table states 15 delivery days; buyer technical ATC states 8 to 10 weeks from Purchase Order (conflict).
Minimum 1-year warranty from delivery; supply with CoC, OEM test certificate, NABL calibration certificate, warranty certificate and user manual.
Offered product is treated under MII Class 1/2 thresholds of 50%/20% local content.
The complete checklist of documents to submit — mandatory vs conditional, with any prescribed formats, proformas or annexures — plus how to submit: portal and mode, envelope/cover structure, digital signature requirements, signing and attestation rules, and physical originals with their deadline.
Online two-packet bid on GeM portal (GEM/2026/B/7878357); Bid to RA is enabled after technical qualification.
Bid is GeM e-bid; no physical-form document submission is prescribed as a pre-qualification step (GeM treats mandating physical pre-requisites as invalid).
Integrity Pact must be signed as prescribed; for partnership/consortium all partners (or PoA holder) must sign; for a company, board-authorised representative must sign. Jurisdiction of Courts at Bangalore.
Every corrigendum/addendum in order — what changed (original vs amended value), its impact, and the action for the bidder — ending with the values that finally apply.
No corrigendum/addendum is present in the tender document set; original bid values continue to apply.
Genuine conflicts within and across the documents (original vs corrigenda, clause vs annexure, tender document vs BOQ): both sides with citations, and which value prevails.
Bid consignee table fixes Delivery Days = 15, while buyer technical ATC requires delivery within 8 to 10 weeks from PO — a material conflict on contractual delivery obligation.
Buyer ATC sets payment at 30 days after delivery and acceptance; GeM GTC default is 100% within 10 days of CRAC unless STC/ATC specifies otherwise.
Only critical, tender-specific pre-bid queries that could materially change bid/no-bid, pricing, eligibility or contractual risk. Skip generic or obvious questions the documents already answer clearly.
Ask buyer to confirm whether contractual delivery is 15 days (GeM consignee table) or 8–10 weeks from PO (technical ATC), and to align the GeM field before award.
Confirm whether NABL calibration must be from an Indian NABL lab on the supplied unit, acceptable certificate age, and whether calibration cost is included in quoted price.
Clarify whether OEM Authorization Certificate is still required if the bidder is the OEM manufacturer of the offered model.
Confirm whether any experience or turnover qualification applies, since the bid shows no MSE/Startup relaxation and mentions exemption proofs, but publishes no numeric criteria.
Seek confirmation that equivalent models meeting or exceeding each numbered specification (especially 500 MHz, 12-bit, 2.5 GSa/s, 100 Mpts, listed serial triggers) will be accepted, and whether datasheet evidence alone is enough at technical evaluation.
Commercial, legal and execution risks a bidder should weigh: liquidated damages and penalties, unusual or one-sided clauses, tight timelines, and payment or security risks.
If GeM contract locks 15-day delivery while specs/ATC assume 8–10 weeks, seller faces high delay risk and LD.
LD at 0.5% of delayed quantity contract value per week (or part), capped at 5% normally and 10% for inordinate delay (>25% of completion period).
Buyer may vary ordered quantity by up to 25% at award and during currency at same rates, extending delivery obligations.
IP breach can lead to disqualification, termination, forfeiture of securities (if any), damages, criminal reference; bidder must not initiate court action while IEM examines a complaint.
Bid sets Arbitration Clause = No and Mediation Clause = No, limiting structured ADR options stated in the bid details.
Buyer enabled display of bidder-uploaded documents to all participating bidders, including clarification/representation documents.
Payment only after delivery and acceptance on 30-day ATC terms; consignee may inspect/accept or reject within GTC return window; invoice must match consignee GSTIN.
Numerous tight DSO parameters (500 MHz, 12-bit, memory, triggers, accessories, NABL cert) create technical-rejection risk if compliance evidence is incomplete.
False land-border compliance declaration is ground for immediate termination and legal action.
The inviting authority and relevant contacts: office, person, designation, address, phone and email — and which address receives physical submissions, if any.
Central Manufacturing Technology Institute (CMTI), Bengaluru under Department of Heavy Industry, Ministry of Heavy Industries and Public Enterprises.
Buyer email [email protected]; HOD grievance redressal email [email protected].
Consignee/Reporting Officer: S Stalin Kumar; address: Central Manufacturing Technology Institute, Tumkur Road, Yeshwanthpur post, 560022.
Tech spec prepared by Emmanuel R, Scientist-B; approved by Tom Thampy, Scientist-E/GH-Aerospace Lab (CMTI Aerospace Lab).
IP says IEM contact details are in bid/tender documents and on CMTI website https://cmti.res.in; named IEM contacts are not printed in the bid PDF itself.
No physical bid-submission address or deadline is prescribed; submission is online on GeM.