Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Clarification
Dear Bidders,Please find below clarification questions and their response for your refernce.Clarification QuestionsDear UNOPS Procurement Team, please confirm whether the Performance Statement labeled Form F in Section III satisfies the criterion referring to Form G. Please also confirm whether a non-manufacturer may rely on official dealer authorization with proof of dealership under the Criteria, given the wording of Form E, and advise which Form C version bidders should use for DAP Gedeb Assasa and Meki. Thank you.Clarification ResponseDear Bidder, The performance statement Form F- is a returnable bidding form where bidders summarize their past Performance. Unfortunately this is a typing error hence read it as Form F. There is no Form G in the returnable bidding document. Regarding the official dealer authorization, it is clearly stated in the qualification criteria below , Please refer below.If a bidder does not manufacture or produce the goods it offers to supply, it shall submit either a manufacturer`s authorization from the manufacturer of the goods or an authorization from an official dealer of the product (a document confirming the dealership must accompany the submission to proof that the vendor is an official dealer) With respect to the Form C, Bidders can use the same Form C to provide their offer for both Project sites.Regards,
Clarification
Dear Bidders,Please find below clarification questions and their response for your refernce.Clarification QuestionsDear Sirs,Greetings!Could you clarify for the following questions:According to the tender drawings, the equipment is placed in a U shape,In this way, the entire workshop is basically occupied. This way, there would be no room for anything else in the workshop. From the drawings, we learned that the height of the plant is 9 meters. If it is made into a two-story structure, then it can be stood on just one side of the wall. It will also have more space. There is still half of the space available for storing its raw materials, finished products and so on. If the overall utilization rate of the room is taken into consideration, it would be more appropriate to offer two-story structure. Two-story structure will increase the cost of one platform, but it will reduce the cost of the elevator. Please confirm whether this design is feasible? Clarification ResponseDear Bidder, The client has a separate designated storage area for raw materials and finished products; therefore, these activities do not need to be accommodated within the processing workshop.The 9-meter workshop height was primarily considered to accommodate the bucket elevators, which require sufficient vertical clearance, as well as to provide adequate ventilation. The U-shaped layout was considered to allow flexibility in accommodating larger machinery within the available workshop space. However, if the bidder's proposed machinery is sufficiently compact to fit in a straight-line or L - shape configuration, the bidder is encouraged to do that. A straight-line arrangement would provide more space for equipment operation and movement. Therefore the bidder is encouraged to explore the feasibility of a straight-line layout/L - shape and propose the most space-efficient arrangement while ensuring adequate access for operation, maintenance, and safety.Regards,
Clarification
Dear Bidders, Please find below clarification question raised by potential bidders and UNOPS's responses. Clarification QuestionsDear UNOPS Procurement Team, To ensure our bid is fully compliant, we kindly request clarification on two conflicting points: 1. Performance Security: The tender details state UNOPS "might request" a 10% Performance Security. Please confirm if this is mandatory for the winning bidder upon contract signature, or conditional? 2. DAP Delivery Address: The Tender Document (Table D) specifies DAP to project sites (Gedeb Assasa and Meki Towns), while Form C (Price Schedule) states DAP to Addis Ababa, Ministry of Agriculture Warehouse. Please confirm the correct destination for our pricing.Clarification Response1. Please note that the requirement for a Performance Security is not an evaluation criterion. UNOPS at its own discretion may request the awarded bidder to surrender a 10% performance security in the form of unconditional and irrevocable on-demand bank guarantee ( UNOPS will only accept Bank Guarantees from Banks or other Financial Institutions with a minimum Long Term Credit Rating of BBB- with Standard and Poor’s, a minimum Long Term Credit Rating of Baa3 with Moody Investor Services, or a minimum Long Term Credit Rating of BBB- with Fitch Ratings.within two weeks from signature of contract).2. Dear Bidder- This is a typing error. Please consider the delivery address as follows DAP Delivery Address: DAP to project sites -Gedeb Assasa and Meki Towns, Form C (Price Schedule), will be amended accordingly. Best Regards,
Tender Value
Refer Docs
Bid Security (EMD)
Refer Docs
Closing Date
30 Nov 2026, 12:00 (UTC)30 Nov 2026, 5:30 pm IST
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
This tender is for the Supply, Installation, Testing and Commissioning of 2 unitsof Seed Cleaning plants including accessories and components for installation at two locations in Ethiopia (Gedeb Assasa and Meki Towns). The supply also includes the training of operators, technicans and mechanics on the operation and maintenance of the machines to be supplied under the terms and conditions of this tender. IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/Guides
322396
ITB/2026/65463
Invitation to bid
Ethiopia
INVITATION
UTC
21 Nov 2026
12 Nov 2026
Form D: Technical Bid Submission Form
Reference [insert ITB reference No.]
Name of Bidder: [insert name of bidder]
Date: [insert submission date]
Bidders shall fill in all Cyan-coloured cells in the Comparative Data Tables below to demonstrate compliance with UNOPS requirements. Bidders are NOT allowed to make any changes in the “UNOPS requirements” columns of the Comparative Data Tables. Such changes might disqualify your submission.
Technical specifications for goods – Comparative Data Table
No UNOPS minimum technical requirements Is quotation compliant? Bidder to complete Details Bidder to complete (Bidders Must populate this column with the technical details of their proposed Product) Page Number on the Product Data Sheet/ Reference Material
I. Item: 3–4 TPH Seed cleaning plant and related components specification
The required machineries must be designed for a processing capacity of 3–4 tons per hour (TPH). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Guaranteed Plant Capacity ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Maize: minimum 2.5–3.0 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Wheat: 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Barley: 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Bidders to confirm: Bidders should cooperate with the UNOPS appointed inspection company (if applicable) and arrange for the inputs, amenities and facilities needed for the conduct of preshipment inspection. Bidder should also, when requested, provide a comprehensive test report and / arrange for an independent inspection of the equipment included in this requirement prior to their shipment (at their own cost) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1 Manual Feeding Hopper
The feeding hopper serves as the primary receiving and temporary storage unit for raw seeds and grains before entering the cleaning process. The hopper should be designed to provide controlled and uniform feeding to downstream conveying equipment through gravity-assisted discharge mechanisms.
1.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.5 Machine Type — Manual Feeding Hopper ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.6 Hopper Capacity — 0.8–1.2 m³ ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.7 Feeding Method — Manual feeding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.8 Discharge Type — Gravity discharge ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.9 Discharge Control — Adjustable slide gate ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.1 Overall Dimensions (L × W × H) — Bidder to specify but should not exceed 1.5 m × 1.5 m × 1.5m) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.11 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.12 Material of Construction — Heavy-duty mild steel (low-carbon steel) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.13 Steel Thickness — 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.14 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.15 Frame Type — Reinforced steel support frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.16 Feeding Opening — Wide-mouth feeding inlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.17 Outlet Connection — Compatible with bucket elevator intake ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.18 Support Legs — Heavy-duty steel support ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.19 Welding Quality — Smooth continuous industrial welding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.2 Corrosion Protection — Anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.21 Mobility Option — Mounted frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.22 Vibration Resistance — Stable during operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.23 Cleaning Access — Easy-clean interior design ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.24 Operation Type — Continuous feeding operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.25 Dust Leakage Control — Minimized through proper sealing ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.26 Compatibility — Suitable for wheat, maize and barley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.27 Safety Features — Feeding guard and smooth edge design ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.28 Installation Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.29 Environmental Suitability — Suitable for indoor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.3 Safety requirements — Feeding opening shall include removable protective grates to prevent large foreign materials from entering the system — Stable support structure — Safe feeding opening — Rounded edges — Proper structural reinforcement ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.31 Accessories At least the following accessories must be supplied with the machine (bidders are advised to include all the accessories and components needed for making hte machine fully operational): — Fasteners (1 complete set) — Adjustable gate handle (1 piece) — Operation manual (1 copy) — Maintenance guide (1 set) — Feeding grate ( 1 set) — Safety guard (1 set) — Level indicator (1 set) — Inspection cover (1 set) — Anchor bolts ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
1.32 Bidders must include manufacturer recommended service parts . The list of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2 Bucket Elevators
The bucket elevator is a vertical conveying system used for the efficient transfer of seeds and grains of wheat, barely and maize between different processing stages. The elevator should operate on centrifugal or continuous discharge principles and should be specifically designed to minimize mechanical damage to seeds during vertical transportation.
2.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.5 Machine Type — Bucket Elevator ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.6 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.7 Conveying Capacity — Minimum 5 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.8 Elevator Height — 5- 7meters ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.9 Elevator Type — Vertical bucket elevator ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.1 Bucket Type — Anti-breakage plastic or steel buckets ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.11 Bucket Material — High-strength plastic or mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.12 Bucket Spacing — BIder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.11 Belt Type — Reinforced rubber belt ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.13 Belt Width — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.14 Belt Speed — Adjustable through Variable Frequency Drive (VFD). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.15 Head Pulley Type: Crown pulley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.16 Tail Pulley Type: Self-cleaning pulley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.17 Pulley Material — Machined steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.18 Motor Type — Electric motor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.19 Motor Power: 2–3 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.2 Voltage — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.21 Transmission System — Belt and pulley drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.22 Grain Damage — ≤ 0.5% Grain damage shall be verified during performance testing by comparing representative grain samples collected immediately before and immediately after the bucket elevator while operating at the rated capacity using the specified crop. (WIll be checked during testing) - Bidder to confirm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.23 Material of Construction — Heavy-duty mild steel (low-carbon steel) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.24 Steel Thickness — Minimum 2mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.25 Frame Type — Rigid reinforced steel frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.26 Overall Dimensions (L × W × H) — Bidder to specify but should not exceed 1 m × 0.5 m × 7.0 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.27 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.28 Feeding System — Gravity intake boot ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.29 Discharge Type — Gravity discharge head ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.3 Inspection Door — Included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.31 Bearing Type — Heavy-duty sealed bearings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.32 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.33 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.34 Noise Level — ≤85 dB(A) at normal operator/workstation locations (measured at a distance of 1m) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.35 Operation Type — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.36 Cleaning Access — Accessible inspection and cleaning doors ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.37 Safety requirements — Belt guard, — Pulley guard — Emergency stop provision ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.38 Installation Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.39 Environmental Suitability — Suitable for indoor and agricultural environments ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.4 Accessories Bidders are expected to supply at least the following accessories and components. Also they need to include all of the items and accessories that can make the machine fully operational — Belt and pulley guard (1 set) — Inspection doors (2 pcs) — Belt alignment device (1 set) --- Boot clean-out door (1pc) — Emergency stop switch (1pc) — Emergency stop provision (1 set) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.41 Bidders must include manufacturer recommended service parts . The list of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2.42 Boot Design — Gravity intake boot with inspection door and clean-out slide for easy cleaning and maintenance. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3 Vibratory pre-cleaner
The pre-cleaner is a preliminary separation machine and it should be designed to remove coarse impurities and oversized foreign materials from incoming raw grain streams prior to fine cleaning operations (Intended Use — Removal of large impurities, dust, straw, stones, and oversized materials from wheat maize and barley before fine cleaning)
3.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.5 Machine Type — Vibratory pre-cleaner ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.6 Cleaning Capacity — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.7 Cleaning Efficiency — ≥ 95% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.8 Grain Loss — ≤ 2% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.9 Grain Breakage — ≤ 1% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.1 Feeding Method — Gravity or bucket elevator feeding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.11 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.12 Screen Type — Interchangeable perforated screens ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.13 Number of Screen Decks — Minimum 2 ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.14 Screen Material — Galvanized steel or stainless steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.15 Screen Cleaning System — Ball cleaning and brush cleaning system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.16 Vibration Type — Eccentric shaft vibration ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.17 Vibration Speed — Adjustable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.18 Aspiration System — Included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.19 Fan Type — Centrifugal blower ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.2 Fan Speed — 800–1,200 rpm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.21 Air Flow Adjustment — Adjustable damper ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.22 Dust Removal Efficiency — High efficiency aspiration ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.23 Motor Type — Electric motor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.24 Motor Power — 3–5 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.25 Voltage — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.26 Transmission System — Belt and Pulley Drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.27 Material of Construction — Heavy-duty mild steel (low-carbon steel) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.28 Contact Parts Material — Stainless steel or corrosion-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.29 Steel Thickness — Minimum 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.3 Frame Type — Reinforced vibration-resistant steel frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.31 Overall Dimensions (L × W × H) —Vendor to specify but it should not be higher than 2 m × 1.5m × 2.5 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.32 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.33 Inlet Type — Gravity feed inlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.34 Dust Outlet — Included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.35 Bearing Type — Heavy-duty sealed bearings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.36 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.37 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.38 Noise Level — ≤85 dB(A) at normal operator/workstation locations. (Measured at a distance of 1 meter) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.39 Cleaning Access — Easy access inspection doors ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.4 Compatibility — Suitable for wheat, maize and barley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.41 Safety Features — Belt guard, pulley guard, emergency stop provision ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.42 Installation Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.43 Environmental Suitability — Suitable for indoor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.44 Safety Requirements — Belt and pulley guards — Emergency stop provision — Stable frame structure — Safe inspection access ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.45 Accessories (one set each) Bidders are advised to include all accessories and components needed for making the machine fully operational. The list should include at least the following: — Screen changing tools — Dust outlet connection — Vibration isolator — Foundation bolts — Fasteners — Screen set — Inspection tools ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3.46 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4 Air Screen Cleaner
4.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.5 Machine Type — Air Screen Cleaner ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.6 Intended Use — Fine cleaning and grading of seeds and grains through air aspiration and vibrating screens ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.7 The air screen cleaner is the principal cleaning machine within the processing line. It should utilize a combination of: — vibratory screening, — controlled airflow, and — multi-stage screen separation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.8 It should separate impurities based on differences in: — size, — shape, and — aerodynamic behavior ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.9 The supplier shall provide complete interchangeable screen sets suitable for wheat, barley, and maize. A screen selection chart identifying the appropriate screens for each crop shall be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.1 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.11 Cleaning Capacity — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.12 Cleaning Efficiency — ≥ 98% Capable of achieving the specified overall plant cleaning efficiency when integrated with the complete seed cleaning line. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.13 Grain Purity — ≥ 98% The complete plant shall produce cleaned seed with a final purity of not less than 98% under rated operating conditions. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.14 Grain Loss — ≤ 2% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.15 Grain Breakage — ≤ 1% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.16 Feeding Method — Gravity or bucket elevator feeding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.17 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.18 Screen Type — Interchangeable perforated screens ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.19 Number of Screen Decks — Minimum 4 screen deck ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.2 Screen Material — Galvanized steel or stainless steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.21 Screen Cleaning System — Ball cleaning or brush cleaning system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.22 Vibration Type — Vibratory motor or eccentric drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.23 Vibration Speed — Adjustable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.24 Aspiration System — Dual aspiration system included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.25 Fan Type — Centrifugal blower ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.26 Fan Speed — Adjustable, approximately 800–1,200 rpm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.27 Air Volume Adjustment — Adjustable damper control ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.28 Dust Removal Efficiency — High-efficiency aspiration system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.29 Motor Type — Electric motor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.3 Motor Power — 5–7.5 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.31 Voltage — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.32 Transmission System — Belt and pulley drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.33 Material of Construction — Heavy-duty mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.34 Contact Parts Material — Stainless steel or corrosion-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.35 Steel Thickness — Minimum 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.36 Frame Type — Reinforced vibration-resistant steel frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.37 Overall Dimensions (L × W × H) — bidder to specify, but should not exceed 3.0 m × 2.5 m × 3.0 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.38 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.39 Inlet Type — Gravity feed inlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.4 Outlet Type — Separate clean seed, oversized, undersized, and impurity outlets ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.41 Dust Outlet — Included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.42 Bearing Type — Heavy-duty sealed bearings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.43 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.44 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.45 Noise Level — ≤85 dB(A) at normal operator/workstation. (measured at 1 meter) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.46 Cleaning Access — Easy access inspection and maintenance doors ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.47 Stability — Low vibration and stable during operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.48 Compatibility — Suitable for wheat, maize and barley. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.49 Safety Features — Belt guards, pulley guards, emergency stop provision ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.5 Installation Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.51 Environmental Suitability — Suitable for indoo ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.52 Safety Requirements — Belt and pulley guards — Emergency stop provision — Stable frame structure — Safe inspection access ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.53 Accessories — Screen sets, complete set for wheat maize and barley — Screen storage rack — Screen changing tools — Dust ducts — Inspection windows — Vibration pads ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4.54 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The destoner should be designed to separate stones, sand particles, metallic fragments, and other heavy contaminants from seeds and grains based on differences in bulk density and aerodynamic properties.
5.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.5 Machine Type — Destoner ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.6 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.7 Separation Capacity — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.8 Separation Efficiency — ≥ 98% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.9 Grain Purity — ≥ 98% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.1 Grain Loss — ≤ 1% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.11 Grain Breakage — ≤ 1% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.12 Feeding Method — Gravity or bucket elevator feeding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.13 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.14 Separation Principle — Combination of vibration and air aspiration ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.15 Deck Type — Inclined vibrating deck ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.16 Deck Material — Wear-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.17 Deck Surface — Perforated or wire mesh type ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.18 Vibration Type — Eccentric vibration system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.19 Vibration Speed — Adjustable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.2 Aspiration System — Included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.21 Fan Type — Centrifugal blower ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.22 Fan Speed — Adjustable, approximately 800–1,200 rpm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.23 Air Flow Adjustment — Adjustable damper control ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.24 Dust Removal Efficiency — High-efficiency aspiration system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.25 Motor Type — Electric motor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.26 Main Motor Power — 2–3 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.27 Vibration Motor Power — 0.5–1 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.28 Voltage — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.29 Transmission System — Belt and pulley drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.3 Material of Construction — Heavy-duty mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.31 Contact Parts Material — Stainless steel or wear-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.32 Steel Thickness — Minimum 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.33 Frame Type — Reinforced vibration-resistant steel frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.34 Overall Dimensions (L × W × H) —Bidder to specify but should not exceed 1.8m × 1.5 m × 2.5 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.35 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.36 Inlet Type — Gravity feed inlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.37 Clean Seed Outlet — Separate discharge outlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.38 Stone Outlet — Separate heavy impurity discharge outlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.39 Dust Outlet — Included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.4 Bearing Type — Heavy-duty sealed bearings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.41 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.42 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.43 Stability — Low vibration and stable during operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.44 Compatibility — Suitable for wheat, maize and barley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.45 Safety Features — Belt guards, pulley guards, emergency stop provision ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.46 Installation Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.47 Environmental Suitability — Suitable for indoor agricultural processing conditions ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.48 Safety Requirements — Belt and pulley guards — Emergency stop provision — Stable frame structure — Safe inspection access ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.49 Accessories (one set for each) — Operation manual — Maintenance manual — Inspection tools — Fasteners — Air ducts — Dust outlet — Inspection cover — Foundation bolts ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.5 Operating Moisture Range — Suitable for operation with grain moisture content of approximately 10–14% (wet basis). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5.51 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6 Gravity Separator
6.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.5 Intended Use — Separation of seeds and grains based on specific weight/density difference ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.6 The gravity separator separates particles according to differences in specific gravity (density). The machine should be particularly effective for removing: — immature seeds, — insect-damaged seeds, — shriveled kernels, — mold-affected grains, and — low-density foreign materials ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.7 The gravity separator shall be adjustable for wheat, barley, and maize. The supplier shall provide recommended operating settings for each crop. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.8 Application — Removal of immature, damaged, insect-attacked, shriveled, and low-density seeds ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.9 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.1 Separation Capacity — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.11 Separation Efficiency — ≥ 98% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.12 Grain Purity — ≥ 98% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.13 Grain Loss — ≤ 1% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.14 Grain Breakage — ≤ 1% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.15 Feeding Method — Gravity or bucket elevator feeding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.16 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.17 Separation Principle — Combination of vibration and controlled air flow ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.18 Deck Type — Rectangular vibrating porous deck ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.19 Deck Material — Wear-resistant perforated steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.2 Deck Inclination — Adjustable longitudinal and transverse inclination ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.21 Vibration Type — Eccentric vibration system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.22 Vibration Speed — Adjustable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.23 Air System — Integrated aspiration and air distribution system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.24 Fan Type — Centrifugal blower ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.25 Air Flow Adjustment — Adjustable damper control ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.26 Air Pressure Control — Adjustable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.27 Number of Discharge Outlets — 4–6 outlets ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.28 Heavy Seed Outlet — should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.29 Light Seed Outlet — should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.3 Middling Outlet — should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.31 Dust Outlet — should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.32 Motor Type — Electric motor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.33 Main Motor Power — 3–5 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.34 Fan Motor Power — 2–3 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.35 Voltage — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.36 Transmission System — Belt and pulley drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.37 Material of Construction — Heavy-duty mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.38 Contact Parts Material — Stainless steel or corrosion-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.39 Steel Thickness — 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.4 Frame Type — Reinforced vibration-resistant steel frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.41 Overall Dimensions (L × W × H) —bidder to specify but should not exceed 2.5 m × 2.0 m × 2.5 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.42 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.43 Inlet Type — Gravity feed inlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.44 Bearing Type — Heavy-duty sealed bearings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.45 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.46 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.47 Noise Level — ≤85 dB(A) at normal operator/workstation (measured at a distance of 1 meter) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.48 Stability — Low vibration and stable during operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.49 Cleaning Access — Easy access inspection and maintenance doors ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.5 Compatibility — Suitable for wheat, maize and barley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.51 Installation Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.52 Environmental Suitability — Suitable for indoor agricultural processing conditions ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.53 Safety Requirements — Belt and pulley guards, — Emergency stop provision, — Stable frame structure, — Safe inspection access ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.54 Accessories (One complete set for each) Bidders must include all accessories and components that are needed for operationalizing the machine and should include: — Air damper, — Operation manual, — Maintenance manual, — Inspection tools, — Fasteners, — Deck adjustment tools, — Air pressure gauge -- Vibration adjustment tools ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6.55 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7 Indented Cylinder
7.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.5 Machine Type — Indented Cylinder / Length Grader ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.6 The indented cylinder is a precision separation machine used for length-based classification of seeds and grains. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.7 Intended Use — Separation of seeds and grains based on length difference and removal of broken or elongated materials ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.8 The rotating cylinder should contain specially designed indented pockets that selectively lift particles according to length characteristics. Materials shorter than the indent size should be lifted and discharged separately while longer particles remain in the cylinder flow path. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.9 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.1 Separation Capacity — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.11 Separation Efficiency — ≥ 95% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.12 Grain Purity — ≥ 98% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.13 Grain Loss — ≤ 1% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.14 Grain Breakage — ≤ 0.5% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.15 Feeding Method — Gravity or bucket elevator feeding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.16 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.17 Separation Principle — Length-based separation using indented pockets ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.18 Cylinder Type — Rotating indented cylinder ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.19 Cylinder Diameter — 600–900 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.2 Cylinder Length — 1.5–3.0 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.21 Cylinder Speed — 30–60 rpm adjustable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.22 Indent Type — Replaceable indented pockets ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.23 Indent Material — Wear-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.24 Motor Type — Electric motor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.25 Motor Power — 1–3 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.26 Voltage — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.27 Transmission System — Belt and pulley drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.28 Material of Construction — Heavy-duty mild steel (low-carbon steel) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.29 Contact Parts Material — Stainless steel or coated steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.3 Steel Thickness — Minimum 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.31 Frame Type — Reinforced vibration-resistant steel frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.32 Overall Dimensions (L × W × H) —Bidder to specify but should not exceed 3.0 m × 1.5 m × 2.0 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.33 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.34 Inlet Type — Gravity feed inlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.35 Outlet Type — Separate clean seed and impurity discharge outlets ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.36 Number of Outlets — Three ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.37 Bearing Type — Heavy-duty sealed bearings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.38 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.39 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.4 Noise Level — ≤85 dB(A) at normal operator/workstation (measured a 1 meter) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.41 Cleaning Access — Easy access inspection and maintenance doors ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.42 Stability — Stable during continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.43 Compatibility — Suitable for wheat, barley and maize ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.44 Installation Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.45 Environmental Suitability — Suitable for indoor use ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.46 Safety Requirements — Belt and pulley guards — Emergency stop provision — Stable frame structure — Safe inspection access ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.47 Accessories (One complete set for each): Bidders should supply all the accessories and components needed for making the machine fully operational including Inspection tools, and fasteners ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.48 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7.49 Indent Sets — The supplier shall provide interchangeable indented cylinders (or interchangeable indent segments, where applicable) suitable for the intended crops (wheat, barley, maize). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8 Interconnecting Chutes and Ducting
8.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.5 Machine Type — Discharge Outlet System ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.6 Intended Use — Collection and discharge of cleaned seeds, graded seeds, impurities, stones, and dust from processing machines ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.7 The discharge outlet system directs processed materials from individual machines into designated collection points, conveyors, or bagging stations. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.8 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.9 Discharge Capacity — Compatible with continuous flow of 3–4 TPH plant ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.1 Discharge Method — Gravity discharge ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.11 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.12 Outlet Type — Bagging spout or open discharge chute ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.13 Number of Outlets — As required by machine configuration ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.14 Clean Seed Outlet — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.15 Impurity Outlet — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.16 Stone Outlet — Should be included where applicable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.17 Dust Outlet — Should be included where applicable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.18 Graded Seed Outlet — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.19 Outlet Shape — Round or rectangular spout ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.2 Outlet Diameter/Size — Sized according to machine capacity ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.21 Flow Control Type — Manual slide gate ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.22 Gate Material — Heavy-duty steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.23 Outlet Connection Type — Flexible sleeve or direct bagging connection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.24 Flexible Sleeve Material — Industrial rubber or reinforced flexible material ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.25 Material of Construction — Heavy-duty mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.26 Contact Parts Material — Stainless steel or coated steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.27 Steel Thickness — Minimum 1.6–2.5 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.28 Support Structure — Reinforced steel support ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.29 Welding Quality — Smooth continuous industrial welding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.3 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.31 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.32 Dust Leakage Control — Proper sealing and tight connection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.33 Bag Attachment System — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.34 Inspection Access — Easy access for cleaning and maintenance ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.35 Cleaning Requirement — Easy-clean design ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.36 Stability — Stable during operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.37 Overall Dimensions — Depends on plant layout and machine connection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.38 Machine Weight — Depends on outlet size and configuration ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.39 Compatibility — Suitable for wheat, maize and barley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.4 Installation Type — Floor mounted or machine mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.41 Environmental Suitability — Suitable for indoor and agricultural processing conditions ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.42 Safety Features — Smooth edge design and secure outlet connection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.43 Safety Requirements — Proper outlet support — Safe bag attachment — Leak-proof connection — Smooth material flow ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.44 Accessories (One complete set for each) Bidders must include all of components and accessories needed for making the machine fully operational and should include the following: — Flexible sleeves — Clamps — Fasteners — Support brackets - Hanging rods — Inspection covers ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8.45 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9 Dust Collector ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The dust collector is an air pollution control device used to separate and collect suspended dust particles from aspiration air streams. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.5 Machine Type — Dust Collector / Cyclone Dust Collector ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.6 Intended Use — Collection and removal of dust, husk, light impurities, and airborne particles generated during seed cleaning operations ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.7 Cyclonic separation principles induce rotational airflow that causes heavier dust particles to move outward and downward into collection chambers due to centrifugal force. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.8 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.9 Dust Collection Capacity — Suitable for continuous operation of 3–4 TPH seed cleaning plant ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.1 Collection Efficiency — ≥ 95% ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.11 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.12 Collection Principle — Cyclonic air separation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.13 Dust Removal System — Air aspiration based ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.14 Fan Compatibility — Compatible with aspiration fan system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.15 Air Flow Capacity — Sized according to plant aspiration requirement ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.16 Air Flow Control — Adjustable damper ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.17 Dust Discharge Type — Bottom discharge outlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.18 Dust Storage Type — Dust collection chamber or bag ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.19 Cyclone Type — Single cyclone or multi-cyclone ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.2 Inlet Type — Air duct inlet connection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.21 Outlet Type — Air exhaust outlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.22 Material of Construction — Heavy-duty mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.23 Contact Parts Material — Corrosion-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.24 Steel Thickness — Minimum 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.25 Support Structure — Reinforced steel support frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.26 Welding Quality — Smooth continuous industrial welding ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.27 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.28 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.29 Dust Leakage Control — Leak-proof sealed connections ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.3 Air Duct Connection — Flexible or rigid duct connection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.31 Inspection Access — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.32 Cleaning Access — Easy access inspection and cleaning doors ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.33 Noise Level — ≤85 dB(A) at normal operator/workstation locations (measured at a distance of 1m) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.34 Stability — Stable during continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.35 Installation Type — Floor mounted or suspended support ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.36 Overall Dimensions (L × W × H) — Bidder to specify ___________ ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.37 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.38 Environmental Suitability — Suitable for indoor agricultural processing conditions ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.39 Compatibility — Suitable for wheat, maize and barley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.4 Safety Features — Proper grounding, secure air duct connections, inspection covers ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.41 Safety Requirements — Leak-proof duct connection — Proper grounding — Stable support frame — Safe inspection access ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.42 Accessories (One complete set for each) Bidders must submit all the accessories and components needed for making the machine fully operational including: — Flexible duct connectors -- Clamps ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9.43 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10 Aspiration Fan
10.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.5 Machine Type — Aspiration Fan / Centrifugal Blower ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.6 Intended Use — Generation of airflow for removal of dust, husk, chaff, and light impurities during seed cleaning operations ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.7 The aspiration fan generates controlled airflow required for pneumatic cleaning operations within the seed processing line. The fan shall create negative or positive air pressure used to remove: — Dust, — Husk, — Chaff, and — Lightweight contaminants. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.8 Plant Capacity Compatibility — 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.9 Air Handling Capacity — Suitable for continuous operation of 3–4 TPH seed cleaning plant ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.1 Fan Type — Centrifugal blower fan ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.11 Air Flow Control — Adjustable air damper ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.12 Fan Speed — 800–1,200 rpm adjustable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.13 Air Pressure Type — Medium pressure airflow ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.14 Aspiration Efficiency — High-efficiency dust and light impurity removal ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.15 Motor Type — Electric motor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.16 Motor Power — 2–5 HP ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.17 Voltage — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.18 Transmission System — Direct coupling or belt and pulley drive ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.19 Impeller Type — Backward curved or radial blade impeller ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.2 Impeller Material — Mild steel or wear-resistant steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.21 Fan Housing Material — Heavy-duty mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.22 Steel Thickness — Minimum 2–3 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.23 Frame Type — Reinforced vibration-resistant steel frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.24 Bearing Type — Heavy-duty sealed bearings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.25 Inlet Type — Duct connection inlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.26 Outlet Type — Duct connection outlet ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.27 Duct Compatibility — Flexible or rigid air duct system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.28 Noise Level — ≤85 dB(A) at normal operator/workstation locations (Measured at a distance of 1m). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.29 Vibration Level — Low vibration operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.3 Surface Finish — Anti-rust industrial paint ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.31 Corrosion Protection — Powder coated or anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.32 Cooling System — Air cooled ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.33 Overall Dimensions (L × W × H) — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.34 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.35 Operating System — Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.36 Inspection Access — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.37 Cleaning Access — Easy access for inspection and maintenance ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.38 Stability — Stable during continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.39 Environmental Suitability — Suitable for indoor agricultural processing conditions ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.4 Compatibility — Suitable for wheat, maize, and barley. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.41 Safety Features — Belt guards, secure duct connection, motor protection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.42 Safety Requirements — Belt and pulley guards, — Proper grounding — Secure air duct connection — Stable mounting structure ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.43 Accessories (One complete set for each): bidders must include all accessories and components that will make the machine fully operational and should at least include the following: — Air damper — Flexible connectors — Vibration isolators — Pressure gauge — Belt guard ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.44 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.45 Air Handling Capacity — The supplier shall size the aspiration fan to provide sufficient airflow and static pressure for effective dust extraction and pneumatic conveying throughout the complete 3–4 TPH seed cleaning plant ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10.46 Performance Requirement — The supplier shall provide the design airflow (m³/h) and static pressure (Pa or mm/WG) of the proposed aspiration fan and demonstrate that it is adequate for the complete dust collection system. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11 Semi-Automatic Bagging & Stitching Machine
11.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.5 Machine Type — Semi-Automatic Gross/Net Weighing, Bagging and Stitching Machine ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.6 Intended Use — Automatic weighing, filling, conveying, and sealing of seed and grain bags ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.7 Application — Seed cleaning and grain processing plant ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.8 Receiving/Buffer Hopper- Included as an integral part of the bagging system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.9 Plant Capacity Compatibility — Suitable for integration with 3–4 TPH seed cleaning line ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.2 Weighing Range — 5–50 kg per bag (adjustable) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.21 Packing Capacity — Minimum 200 bags/hour at 50 kg bag size, with adjustable settings for 5–50 kg bags. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.22 Weighing Accuracy — ±0.2% Full Scale (FS) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.23 Weighing System — High-precision electronic load cell system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.24 Load Cell Configuration — 3–4 point load cell system for stability ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.25 Control System — PLC-based control system (Siemens / Delta / Schneider or equivalent) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.26 Display Unit — Digital LED/LCD indicator with calibration and batch counter ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.27 Feeding System — Gravity feed with multi-stage (coarse/medium/fine) control ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.28 Bag Clamping System — Pneumatic duckbill or jaw-type bag clamping system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.29 Clamping Control — Foot pedal or sensor-activated automatic system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.3 Air Requirement -- 0.44–0.6 MPa compressed air with FRL unit. The supplier shall specify the compressed air consumption (L/min) of the proposed machine for sizing the air compressor. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.31 Conveyor Type — Motorized belt conveyor system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.32 Conveyor Length </=2.5 ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.33 Conveyor Width — supplier shall specify (but the conveyor should be able to move the bags safely) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.34 Belt Material — Heavy-duty PVC or rubber anti-slip belt ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.35 Drive System — Gear motor-driven conveyor with stable speed ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.36 Stitching Machine Type —Fixed industrial bag closing machine (integrated) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.37 Stitching Speed — 1,200–1,800 stitches/minute ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.38 Stitch Type — Single-thread chain stitch (as per Type 101 of the bag stitching standard) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.39 Compatible Bags — PP woven bags, jute bags, paper bags, cloth bags ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.4 Needle Type — Industrial heavy-duty sewing needle ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.41 Thread Type — Polyester, cotton, or synthetic thread ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.42 Thread Cutting System — Manual or automatic thread cutter ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.43 Bag Thickness Compatibility — Up to 10 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.44 Motor Type — Electric gear motor system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.45 Motor Power — 1.5–2.5 kW total system power ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.46 Voltage — 220–240 V, 50 Hz, Single Phase (or 3-phase optional) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.47 Control Interface — supplier shall specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.48 Machine Frame Material — Heavy-duty mild steel (MS) structural frame ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.49 Contact Parts Material —Corrosion-resistant, durable, and easy to clean ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.5 Surface Finish — Industrial anti-rust powder coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.51 Welding Quality — Continuous industrial-grade welding, dust-tight joints ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.52 Cooling System — Air-cooled electrical and motor system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.53 Noise Level — ≤85 dB(A) at normal operator/workstation measured at a distance of 1 meter ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.54 Vibration Level — Low vibration heavy-duty design ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.55 Overall Dimensions (L × W × H) — Bidder to specify but should not exceed 2.5 m × 1.5 m × 2.5 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.56 Machine Weight — Bidder to specify ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.57 Safety Features — Emergency stop, overload protection, pneumatic safety interlock ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.58 Electrical Protection — Proper grounding, overload and short-circuit protection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.59 Operation Type — Semi-automatic continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.6 Cleaning Access — Easy access design for cleaning and servicing ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.61 Environmental Suitability — Indoor industrial grain processing environment ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.62 Installation Type — Floor-mounted system with anchoring bolts ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.63 Accessories (One complete set for each): bidders should include all the accessories and components needed for making the machine fully operational and must include: — FRL unit (Filter, Regulator, and Lubricator) — Calibration tools — Thread stand — Calibration weights — Air regulator — Tool kit — Spare sewing thread ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
11.64 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12 Electrical Control Panel
The electrical control panel provides centralized monitoring, operation, and protection of all electrically driven equipment within the processing plant.
12.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.5 Machine Type — Electrical Control Panel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.6 The panel should integrate: — motor starters, — overload protection, — emergency stop systems, — phase monitoring, and — operational indicators ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.7 Plant Compatibility — Suitable for 3–4 TPH seed cleaning plant ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.8 Control Type — Centralized electrical control system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.9 Operating System — Manual and semi-automatic operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.1 Power Supply — 380–415 V, 50 Hz, 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.11 Control Voltage — 220 V AC or 24 V DC ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.12 Total Connected Load Capacity — Supplier to calculate and specify based on the complete plant electrical load and motor starting requirements. (Vendor to provide/ indicate the total load) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.13 Panel Type — Floor-mounted industrial control panel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.14 Enclosure Material — Heavy-duty mild steel ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.15 Enclosure Thickness — Minimum 1.5–2 mm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.16 Surface Finish — Powder coated anti-rust finish ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.17 Protection Class — Minimum IP54 ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.18 Main Circuit Breaker — MCCB included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.19 Motor Protection — Thermal overload relays included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.2 Motor Starters — DOL or Star-Delta starters ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.21 Contactor Type — Heavy-duty industrial contactors ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.22 Control Switches — Start/stop push buttons ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.23 Emergency Stop System — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.24 Indicator Lamps — Power, running, and fault indicators ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.25 Voltage Meter — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.26 Current Meter — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.27 Phase Protection — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.28 Short Circuit Protection — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.29 Overload Protection — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.3 Earthing System — Proper grounding should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.31 Cable Entry Type — Bottom or top cable entry ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.32 Internal Wiring — Industrial-grade copper wiring ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.33 Terminal Blocks — Heavy-duty terminal blocks ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.34 Cable Identification — Properly labeled wiring system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.35 Cooling System — Ventilation fan or air vent system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.36 Noise Level — ≤85 dB(A) at normal operator/workstation ( measured at a distance of 1 meter) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.37 Mounting Type — Floor mounted ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.38 Panel Access — Lockable front access door ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.39 Maintenance Access — Easy access for servicing and inspection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.4 Safety Interlock System — Should be included ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.41 Automation Compatibility — Expandable for automation upgrades ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.42 Operating Environment — Suitable for indoor industrial/agricultural conditions ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.43 Temperature: — Suitable for continuous operation at ambient temperatures of up to 40°C. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.44 Corrosion Protection — Anti-corrosion coating ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.45 Stability — Stable vibration-resistant structure ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.46 Compliance Standard — IEC/industrial electrical standards ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.47 Safety Features — Emergency stop, overload protection, grounding system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.48 Safety Requirements — Proper grounding — Overload protection — Short circuit protection — Emergency stop system — Control panel door should be interlocked ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.49 Accessories (One complete set for each): bidders must include all the the necessary accessories and components for making the machine fully operational and should include: — Electrical drawings — PLC software backup — HMI backup program — Cable markers — Spare keys ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
12.5 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13 Color separator/ Sorter
13.1 The machine uses optical sensors and high-speed ejectors to identify and remove discolored, defective, damaged, or foreign kernels based on their color and, depending on the model, other optical characteristics.
13.2 Intended application - Certified seed cleaning and grain sorting ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.3 Compatible crops - Wheat, maize, and barley ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.4 Rated plant capacity - 3–4 TPH ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.5 Required throughput - Minimum 3 TPH per crop, with a target of 4 TPH where feasible ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.6 Sorting principle - Optical detection and pneumatic ejection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.7 Camera system - High-resolution industrial CCD or equivalent full-color imaging ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.8 Optical detection - RGB color detection; additional spectral detection if offered ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.9 Lighting system - Stable, high-intensity LED illumination ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.1 Sorting channels - Multiple chutes or channels, sized for the required capacity ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.11 Ejection system - High-speed pneumatic ejectors/solenoid valves ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.12 Sorting targets - Discolored, damaged, mold-stained, and visually defective kernels; contrasting foreign material ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.13 Control system: PLC or industrial controller with touchscreen HMI ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.14 Sorting adjustment - Adjustable sensitivity, rejection threshold, and crop-specific recipes ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.15 Operating mode - Continuous operation ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.16 Feed system - Uniform, vibration-controlled or equivalent feeding system ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.17 Product outlets - Acceptable product and reject outlets, with separate collection ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.18 Sorting accuracy : ≥ 98% good-seed acceptance rate for wheat, maize, and barley at the specified operating capacity. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.19 Reject ratio - Supplier to specify under agreed crop and impurity conditions ( good-seed loss not exceeding 2% by mass. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.2 Electrical supply - 220–240 V, 50 Hz, or compatible three-phase supply as confirmed by the manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.21 Installed power - Approximately 2–4 kW; supplier to confirm ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.22 Compressed-air pressure - Approximately 0.6–0.8 MPa, subject to the selected model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.23 Air consumption - Supplier to specify at rated throughput and maximum expected rejection rate ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.24 Air quality - Dry, clean compressed air with suitable filtration ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.25 Compressor - Included or separately specified and sized for the machine ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.26 Machine construction - Industrial-duty frame with corrosion-resistant product-contact surfaces ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.27 Inspection and cleaning - Accessible chutes, lenses, and inspection covers ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.28 Dust protection - Suitable protection against grain dust, with required extraction provisions ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.29 Installation - Floor-mounted, level, and vibration-stable ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.3 Dimensions - Bidder to specify but should not exceed 2.0 m × 2.5 m × 3.0 m ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.31 Safety - Electrical protection, emergency stop, guarding, and safe maintenance access ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
13.32 Accessories - Feed hopper, discharge chutes, control panel, air preparation unit, and required connections ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14 Air Compressor
Purpose — Supply compressed air for the Color sorter semi-automatic bagging machine and any other pneumatic equipment included in the seed cleaning plant.
14.1 Offered Product Brand ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.2 Offered Product Model ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.3 Offered Product Manufacturer ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.4 Offered Product Country of Origin ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.5 Equipment — Air Compressor ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.6 The supplier shall calculate and provide the total compressed air consumption (L/min or CFM) of all pneumatic equipment included in the plant and shall supply an air compressor with adequate capacity and reserve to ensure reliable continuous operation. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.7 Type — Industrial reciprocating or rotary screw air compressor suitable for continuous operation. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.8 Operating Pressure — Minimum 0.6 MPa (6 bar); adjustable operating pressure within the equipment operating range. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.9 Air Delivery — The supplier shall declare the Free Air Delivery (FAD) in L/min or CFM at the rated operating pressure. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.1 Air Quality — Equipped with moisture separator, pressure regulator, and air filter to provide clean, dry compressed air. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.11 Drive Motor — High-efficiency electric motor suitable for 380–415 V, 50 Hz, 3-phase power supply. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.12 Control System — Automatic start/stop operation with pressure switch and overload protection. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.13 Safety Features — Pressure relief valve, pressure gauge, non-return valve, motor overload protection, and emergency stop. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.14 Noise Level — Maximum 75 dB(A) measured at 1 m distance. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.15 Installation Accessories — Air receiver, connecting hoses, valves, regulators, fittings, vibration pads, and all accessories required for complete installation. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.16 Documentation — Operation and maintenance manuals, electrical drawings, spare parts list, and recommended maintenance schedule. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.17 Warranty — Minimum 12 months from successful commissioning and acceptance. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.18 Bidders must include manufacturer recommended service parts . List of these items must be attached to their offer. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
14.19 Accessories(One complete set for each): bidders must include all the accessories and components needed for making the machine fully operational including: — Air receiver — Moisture separator — Pressure regulator — Drain valve — Air hose — Quick couplings ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
II. General Requirement for Seed Cleaning Plant Machinery
1 General Technical Requirements
The complete seed cleaning plant shall be designed for continuous operation with a processing capacity of 3–4 tons per hour (TPH) based on wheat, barley, maize, and similar crops at normal operating moisture content. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The plant shall ensure high operational efficiency with: ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
— Cleaning efficiency not less than 98% (The supplier shall demonstrate that the complete plant achieves the specified performance during commissioning.) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
— Minimal grain damage and breakage ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
— Stable and continuous material flow ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
— Low operational losses ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All machines shall be suitable for wheat maize and barley operation and capable of handling different seed and grain types through adjustable settings and interchangeable screens where applicable. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Machines shall be fabricated from heavy-duty industrial-grade materials suitable for agricultural processing environments and continuous industrial operation. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All structural frames shall be rigid, vibration-resistant, and properly reinforced to minimize operational vibration and structural fatigue. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All product-contact parts shall be made from corrosion-resistant materials or coated to prevent contamination and corrosion during operation. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All welding works shall be continuous, smooth, and of industrial quality without visible defects, cracks, sharp edges, or weak joints. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All rotating and moving parts shall be dynamically balanced and properly aligned to ensure smooth operation and reduce wear. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All bearings, shafts, pulleys, and transmission components shall be heavy-duty industrial type suitable for continuous operation. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All machinery and equipment supplied shall be brand new, unused, and of the latest model incorporating recent improvements in design, engineering, materials, and workmanship. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
2 Electrical and Power Requirements
All electrical equipment shall be compatible with local power supply standards: — 380-415V — 50Hz — 3 Phase ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Electrical motors shall be energy efficient, industrial-duty type, and properly sized for the intended machine load. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Electrical systems shall include: — overload protection, — short circuit protection, — phase protection, and — emergency stop systems ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All electrical wiring, cables, connectors, and control components shall comply with recognized industrial electrical standards (IEC 60204-1 and relevant component-specific IEC standards.). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Proper grounding and earthing systems should be provided for all electrical equipment. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
3 Safety Requirements
All machines shall include necessary safety guards for belts, pulleys, chains, rotating shafts, and moving components. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Emergency stop provisions shall be installed on major processing equipment and control systems. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Machines shall be designed to ensure safe operation, inspection, cleaning, and maintenance. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Sharp edges and hazardous protrusions shall not be permitted. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All machines shall comply with industrial safety and occupational health standards applicable to agricultural processing facilities ES ISO 12100:2021 — Safety of machinery: General principles for design, risk assessment and risk reduction.). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The electrical control system shall include lockable main isolators and provisions for Lock-Out/Tag-Out (LOTO) during maintenance. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
4 Dust Control and Environmental Requirements
The plant shall include an efficient aspiration and dust collection system to minimize airborne dust and maintain a clean working environment. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Dust collection systems shall be leak-proof and properly connected to aspiration fans and cleaning machines. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
5 Operational and Maintenance Requirements
Machines shall be easy to operate and maintain by trained operators with minimum technical supervision. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
All lubrication points, inspection doors, and maintenance access areas shall be easily accessible. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The supplier shall provide complete operation and maintenance manuals in English. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The available space dimension for the two plants is as follows: 1. Gedeb Assasa Farmers’ Union in Gedeb Assasa town, West Arsi Zone, Oromia Region: about 200 meter Square (10cm x 20cm) 2. Dembi Bora Farmer's Union in Meki town, Ziway road, Oromia Region: about 200meter Square (10cm x 20cm) Bidders are required to provide the complete plant layout and must ensure that the plant layout allows sufficient space for: — operation, — maintenance, — cleaning, — inspection, and — future expansion. Note: Preliminary designs of the two sites have been attached to help bidders to get first hand information on the site and the structures of the facilities where the two plants will be installed. It does not indicate/ implicate any construction work on the bidders. Any modification or change needed on the site will be performed by UNOPS or its appointed representative/ contractor) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
6 Spare Parts and Accessories Requirements
The supplier shall provide:
— A complete spare parts catalogue with part numbers ( if available). ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
— A recommended additional spare parts accessories and maintenance schedule. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The supplier shall provide all interconnecting chutes, ductwork, platforms, ladders, supports, access structures, fasteners, and accessories necessary for a complete and fully operational seed cleaning plant. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
7 Installation and Commissioning Requirements
The supplier shall provide installation supervision, commissioning, performance testing, and operator training at site. The following are installation sites: 1. Gedeb Asasa Farmers’ Union in Gedeb Asasa town, West Arsi Zone, Oromia Region), Ethiopia (About 268 km from Addis Ababa) 2. Dembi Bora Farmer's Union in Meki town, Ziway road, Oromia Region, Ethiopia ( About 143 km from Addis Ababa) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The supplier shall provide a minimum of five days of on-site training for operators and maintenance personnel covering operation, setup, adjustment for different crops, routine maintenance, safety procedures, and basic troubleshooting. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
UNOPS might request a successful bidder to submit a test and inspection report at their cost prior to shipment of the equipment. UNOPS has the right to reject any equipment/ machine that does not meet the minimum requirement specified in this document. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The supplier shall demonstrate during commissioning that the plant meets the guaranteed throughput, cleaning efficiency, purity, and seed loss requirements for wheat, barley, and maize. The plant shall be tested under actual operating conditions before final acceptance. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
8 Documentation Requirements
The supplier shall provide the following documents: — Technical specification — Operation manuals — Maintenance manual — Spare parts manual — Warranty certificate — Certificate of Conformity for electrical equipment (as indicated in this requirement) ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
9 Warranty and After-Sales Service Requirement
All of the machineries must have a minimum warranty period of 12 months from the date of successful commissioning and performance acceptance. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The supplier shall confirm availability of technical assistance and spare parts support after warranty expiration. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The supplier shall have an authorized Ethiopian representative/ local agent for proper warranty management and afterservice management ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
10 Packaging Requirements
Layout design: The supplier shall prepare and submit the equipment layout design based on the dimensions and site information provided by UNOPS, ensuring adequate space for operation, cleaning, maintenance, safety, and material flow. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
NB: Bidders shall provide a detailed list of recommended spare parts, spare parts catalogue, and basic accessories and spare parts, in addition to the above listed. These should be supplied free of charge together with the machine (as part of delivery).
Delivery, and Sustainability –– Comparative Data Table
UNOPS Requirements
Delivery time: An awarded bidder shall deliver the goods to FCA ( Bidders should specify the FCA point /port of Origin ) point within a maximum of 90 days after contract signature, and within 120 days to respective project sites (Gedeb Assasa and Meki Towns) after contract signature. Installation of the plant should not take more than 30 days after delivery. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Delivery place and Incoterms rules: FCA named port of origin, as per Incoterms 2020, including installation. Testing, commissioning and Training. DAP to the respective project sites (Gedeb Assasa and Meki Towns) after contract signature (including customs clearance, handling, delivery and offloading services; and installation, testing, commissioning and Training). UNOPS reserves the right to Award a contract on FCA or DAP Incoterms basis and to the best interest of UNOPS and the partner. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
Installation Testing, Commissioning and Training: The installation, testing and commissioning shall be completed within a maximum of 30 days time from the date of site readiness confirmation. The Ministry's /enduser's technicians need to be engaged throughout the installation, testing and commissioning of the machines. Once the installation and commissioning is completed, operators and technicians of the Ministry must be given at least 5 days theoretical and practical training. ☐ Yes ☐ No Insert details of goods offered, including relevant specifications and references to manuals
The offered goods and related services (if applicable) are in accordance with the required specifications and requirements specified in Section II: Schedule of Requirements: ☐ Yes ☐ No
ANY DEVIATION MUST BE LISTED BELOW:
Inspections and tests
The following inspections and tests shall be performed:
UNOPS or its representative reserve the right to inspect and/or test any or all items of the goods to confirm their conformity to the contract, prior to dispatch from the manufacturer’s/supplier premises. Such inspection and clearance will not prejudice the right of the consignee to inspect and test the goods on receipt at destination. If the goods fail to meet the laid down specifications, the supplier shall take immediate steps to remedy the deficiency or replace the defective goods to the satisfaction of the purchaser.
The offered goods and related services (if applicable) are in accordance with the required specifications and requirements specified in Section II: Schedule of Requirements.
ANY DEVIATION MUST BE LISTED BELOW:
I, the undersigned, certify that I am duly authorized by [insert full name of bidder] to sign this bid and bind [insert full name of bidder] should UNOPS accept this bid:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
_Form D_ Technical Bid Submission Form_ITB_2026_65463 (1).xlsx
Bidding document • 0.08 MB
Gedeb Asasa- Seed cleaning Facility Preliminary Design.pdf
Bidding document • 1.64 MB
Meki - Seed cleaning facility Preliminary Design.pdf
Bidding document • 1.75 MB
Sample of Contract_for_goods.pdf
Bidding document • 0.13 MB
Section I - Instruction to Bidders.pdf
Bidding document • 0.17 MB
Section II_ Schedule of Requirements - ITB_2026_65463 (1).pdf
Bidding document • 0.75 MB
Section III_ Returnable Bid Forms (To be filled by bidders)_ITB_2026_65463 (2).docx
Bidding document • 0.80 MB
UNOPS_eSourcing_Vendor Guide_v1.3_EN.pdf
Bidding document • 2.40 MB
Notice on UNGM.html
Notice page • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .