Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Amendment #1
Amendment # 3 :This amendment is issued to extend the tender deadline to be on 22-Nov-2026 instead of 15-Nov-2026 and clarification to be until 12-Nov-2026 instead of 9-Nov-2026 and amend the technical document to accept the vary dimension.
Clarification
Lot 1 Mini Rads or Compatible Devices1.1 Battery life — Section II, item 1.4The specification requires a minimum of 150 hours of continuous operation in a background field. Would a device with a battery life of 40 hours be acceptable?Re: Not accepted. The proposed battery life of 40 hours is significantly below the required minimum of 150 hours of continuous operation. The offered device must comply with the battery life requirement specified in the tender.1.2 Dimensions — Section II, item 1.4The specification states maximum acceptable dimensions of approximately 80 × 60 × 25 mm. Would a device with a dimension of 82 mm in place of the specified 80 mm be acceptable?Re: Accepted. The proposed deviation of 2 mm (2.5%) is considered minor and acceptable, provided that all other dimensions and technical requirements comply with the tender specifications.1.3 Weight — Section II, item 1.4The specification states a maximum weight of 100 g. Would a device weighing 120 g be acceptable?Re: Not accepted. The offered device must comply with the maximum weight requirement of 100 g, as specified in the tender.1.4 Delivery time — Section II, Delivery RequirementsThe delivery requirement states that the goods shall be delivered 8–12 weeks after contract signature. For Lot 1, would delivery later than 12 weeks after contract signature be acceptable? If so, please indicate the latest acceptable delivery period and any applicable conditions.Re: Not accepted. The delivery period shall remain as specified in the tender requirements (8–12 weeks from the date of contract signature). Bidders are required to comply with the stipulated delivery schedule.Lot 2 Handheld Portable X-Ray Scanner Inspection System2.1 X-ray source — Section II, item 2.3The specification states: “X-Ray Source: Minimum 70 kV up to 120 kV”. Would an X-ray source rated at 140 kV be acceptable?Re: Not accepted. The offered X-ray source must comply with the voltage range specified in the tender requirements (70–120 kV).2.2 Backscatter penetration — Section II, item 2.3The specification refers to “a minimum of 3mm to 6mm of steel equivalent”. Please clarify the minimum steel-equivalent thickness that the offered system must penetrate to comply.Re: The minimum acceptable penetration capability shall be 3 mm of steel equivalent. Any offered system capable of penetrating 3 mm or more shall be considered compliant with this requirement.The bidders shall provide supporting technical documentation from the manufacturer confirming the offered system's penetration capability.Lot 3 Handheld Raman Analyzer3.1 Optical adapters — Section II, item 3.4Are the example adapters specified (direct sampling, vial/cuvette holders and through-barrier adapters) mandatory, or are they provided for reference only? We will supply adapters appropriate for our Raman system accordingly.Re: The specified optical adapters are provided as examples and are not mandatory in terms of their specific design or configuration.Bidders may offer the appropriate adapters supplied or recommended by the manufacturer for their proposed Raman system, provided that the offered configuration supports the required sampling functions, including direct sampling, vial/cuvette sampling, and through-barrier sampling.The bidder shall provide technical documentation confirming the functionality and compatibility of the offered adapters.Lot 4 Handheld Detector for Radioactively Contaminated Goods4.1 Display — Section II, item 4.3The specification calls for a backlit digital display, for example an LCD. Would an OLED display with a clear display be acceptable?Re: An OLED display is acceptable as an alternative to a backlit LCD display, provided that it ensures clear visibility and readability of all measurements, readings, and warning indications under normal operating conditions, including both daylight and low-light environments.The display technology is not restricted to LCD, and equivalent or superior display technologies are acceptable, provided that the required functionality and performance are maintained.4.2 Dimensions — Section II, item 4.3The specification states maximum acceptable dimensions of approximately 160 × 85 × 45 mm. Would a handheld device measuring 320 × 146 × 84 mm be acceptable?Re: The proposed dimensions (320 × 146 × 84 mm) significantly exceed the specified maximum dimensions (approximately 160 × 85 × 45 mm). This deviation is not considered minor and may affect the device’s portability and ease of handling. Therefore, the proposed dimensions are not acceptable.4.3 Power supply — Section II, item 4.3The specification calls for standard, easily replaceable commercial batteries, for example AA alkaline batteries. Would a rechargeable lithium-polymer battery be acceptable?Re: Not accepted. The tender clearly requires standard, commercially available, and easily replaceable batteries, such as AA alkaline batteries, to ensure convenient replacement and uninterrupted field operation.Lot 5 Handheld Gold, Gold+ and Mineral Testing Analyzer5.1 X-ray tube target materials — Section II, item 5.3The specification refers to Ag as standard and to “options/inclusions for Au(included), W(included), Rh(included)”. Please clarify whether Au, W and Rh targets must all be supplied together with Ag, or whether the system only needs to support them as optional choices.Our standard configuration uses one Rh target. Ag and W targets are optional, and the instrument is configured with one target rather than multiple interchangeable targets supplied together. We understand that the Rh target provides better performance than Ag. Would the standard Rh-target configuration be acceptable?Re: The listed target materials (Ag, Au, W, and Rh) are alternative options, and supplying all four targets is not mandatory. Either Rh or Ag target is acceptable, provided that the offered XRF analyzer meets the specified elemental detection range and analytical performance requirements. The manufacturer shall provide supporting technical documentation confirming the detectable elements, accuracy, and any analytical limitations.
Clarification
Question:Meanwhile, we would like to request the following clarifications:1. Considering the current situation in Yemen, would you be willing to accept the FCA terms?2. Can the training be changed to an online training? Answer:The mentioned incoterm and physical training are mandatory.
Clarification
Question:Regarding Lot 2 – Technical Deviations (Item 2.3):1. Weight & SizeTender requirement:Weight: max 4.5 kg (including battery)Size: max 254 × 203 × 254 mmOur offered unit:Weight: 4.8 kg (including battery) — 0.3 kg overSize: 229 × 275 × 197 mm 2. X-Ray SourceTender requirement: 70–120 kVOur offered unit has three selectable tube voltage settings: 90 kV, 120 kV, and 140 kV.Please confirm if the above minor deviations are acceptable.Answer: The evaluation Team will proceed with the evaluation once the tender reached the deadline , so the bidders can submit there technical offer and the evaluation Team will evaluate based on UNOPS technical requirements and evaluation criteria.
Clarification
Question:We are working on our participation on this tender. In order to complete all the requested Lots in time, could you please extend the submission deadline with three (3) days, to November 18th 2026?Answer:We will extend the tender for additional 7 calender days.
Tender Value
Refer Docs
Bid Security (EMD)
Refer Docs
Closing Date
22 Nov 2026, 09:00 (UTC)Due today22 Nov 2026, 2:30 pm IST
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender description: Supply and delivery of the Handheld safety devices ----- IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/Guides Interested in improving your knowledge of what UNOPS procures, how we procure and how to become a vendor to supply to our organization? Learn more about our free online course on “Doing business with UNOPS” here
320286
ITB/2026/64990
Invitation to bid
Yemen
INVITATION
UTC
21 Nov 2026
29 Oct 2026
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ITB_Section_I_Instructions to Bidders.pdf
Bidding document • 0.28 MB
ITB_Section_III_Returnable Bidding Forms (3).docx
Bidding document • 1.24 MB
ITB_Section_IV_Contract Forms.docx
Bidding document • 0.49 MB
Sample Purchase Order.docx - Google Docs.pdf
Bidding document • 0.41 MB
ITB_Section_II_Schedule of Requirements amended.docx
Bidding document • 1.39 MB
Notice on UNGM.html
Notice page • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .