Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Revision
Dear Sir/Madam, Please be advised that minutes of the pre-bid meeting and clarification No. 1 has been attached to this advert. Best regards The UNICEF Supply Team
Revision
Dear Sir/Madam, Please be advised that a revised version of Annex G (BOQ) has been attached to this advert. Additionally, please note that the pre-bid meeting originally scheduled for 16 November 2026 has been rescheduled to 3:00PM, 18 November 2026. We kindly request all interested bidders to take note of these updates and make the necessary arrangements accordingly. Best regards The UNICEF Supply Team
Tender Value
Refer Docs
Bid Security (EMD)
Refer Docs
Closing Date
26 Nov 2026, 23:59 (+03:00)5d left27 Nov 2026, 2:29 am IST
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Construction of Vehicle Parking Shade and Generator House – UNICEF Jigjiga Field Office Important Note: Please be advised that a revised version of Annex G (BOQ) has been attached to this advert. Additionally, please note that the pre-bid meeting originally scheduled for 16 November 2026 has been rescheduled to 3:00PM, 18 November 2026. We kindly request all interested bidders to take note of these updates and make the necessary arrangements accordingly. Best regards The UNICEF Supply Team
322167
LRFP-2026-9207112
Request for proposal
Ethiopia
RFP
+03:00
21 Nov 2026
11 Nov 2026
VEHICLE PARKING SHADE
GENERATOR HOUSE
ITEM DESCRIPTION
Excavation and Earth Work
Pit excavation for isolated footing to a depth not exceeding 150cm from stripped ground level including 25cm working allowance for each.
Load and cartaway surplus excavated material to a suitable damping are allowed by the municipality not more than 2km from the site.
Concrete work
Reinforced concrete class C-25 with a minimum cement content of 320kg/m3 filled in to form work and vibrated around reinforcement bar (formwork and reinforcement measured separately).
Provide, cut and fix in position wooden or metal formwork to create smooth and straight edge sizes.
Reinforcement steel bar according to structural drawing. Price includes cutting, bending, placing in position and tying wire.
Steel Work and Roofing
Main supports as specified on the drawing.
RHS size: 80 x 80 x 3.5mm (in vertical post)
RHS size: 50 x 50 x 3mm (diagonal X-bracer, as in drawing)
Lattice purlin
Steel plate
J- Bolt
Wedge To be welded on the member at the bottom of the vertical member
Supply and fix EGA-400, 0.4mmthick with all the necessary accesssories.Price includes J bolt, nuts, fishers and all incidental works
Supply and fix G-28 flat metallic sheet gutter with with development length of of 70cm. Price includes brackets and fixers.
Supply and fix PVC Down pipes of 110mm diameter complete with strainer at inlet, galvanized clips/ and dia 8mm bar welded at every elbows,joints and at every 1m interval & all the necessary accessories, to be mounted and fixed firm to the cantiliver steel frame.
Shape of bar
Footing Column
Description
Main supports as specified on the drawing.
Location:-
Description
members
Description
members
Description
SUB-STRUCTURE
EXCAVATION & EARTH WORK
CONCRETE WORK
MASONRY WORK
SUPER-STRUCTURE
CONCRETE WORK
BLOCK WORK
ROOFING WORK
CARPENTRY AND JOINERY
METAL WORK
FINISHING
PAINTING
ELECTICAL INSTALLATION
ITEM DESCRIPTION
SUB-STRUCTURE
EXCAVATION & EARTH WORK
Clearing of the site to remove top soil and other rubbish materials to an average depth of 200mm.
Bulk excavation in ordinary soil to reduce level to a depth not exceeding 500mm.
Pit excavation for footing foundation to an average depth not exceeding 1500mm.
Trench excavation for stone masonry foundation wall to an average depth not exceeding 1000mm.
Cart away surplus excavated material to a distance not exceeding 1 Km from site.
250mm thick basaltic or equivalent stone hard core well rolled, consolidated and blinded with crushed stone.
CONCRETE WORK
50 mm thick lean concrete in class C-7 with minimum cement content of 160 kg/m³.
Reinforced concrete filled in to form work and vibrated around steel reinforcement (formwork and reinforcement are measured separately).
footing column (C-30)
Grade beam (C-30)
120mm thick ground floor slab. (C-25)
Provide, cut and fix in position wooden or metal formwork:
footing column
Grade beam
Steel reinforcement according to structural drawing. Price shall include cutting, bending, placing in position and tying wires.
Diam. 8 mm Deformed bar.
Diam. 10 mm Deformed bar.
MASONRY WORK
Foundation wall
SUPER -STRUCTURE
CONCRETE WORK
Reinforced concrete filled in to form work and vibrated around rod reinforcement (steel and form work measured separetely).
In elevation columns.(C-30)
In Top tie beam (C-30)
Provide, cut and fix in position wooden or metal formwork:
In elevation columns.
Top tie beam
Steel reinforcement according to structural drawing. Price shall include cutting, bending,placing in position and tying wires.
Diam. 8 mm Deformed bar.
Diam.12 mm. Deformed bar.
Diam.14 mm. Deformed bar.
BLOCK WORK
Construct 200mm.thick Class C HCB wall bedded in cement sand mortar mix (1:3).
ROOFING WORK
Supply and fix 0.4mm thick G-28 pre-coated corrugated iron sheet roof cover to the 50x70 mm zigba purlin and wooden truss. Price includes all materials to fix the roof sheet. All work shall be in accorance with the Architectural detail drawing. (measurement will be taken horizontal projection).
Supply and fix G-28 flat metallic coping with development length of 40cm. Price includes brackets and fixers.
Supply and fix G-28 flat metallic sheet gutter with with development length of of 50cm. Price includes brackets and fixers.
Supply and fix PVC Down pipes of 110mm diameter complete with strainer at inlet, galvanized clips at every elbows,joints and at every 1m interval & all the necessary accessories.
CARPENTRY AND JOINERY
Supply, fabricate and mount wooden roof truss with a spacing of 125cm and according to the structural drawing. Price shall include two coats of anti-termite treatment and all other necessary accessories.
Upper & lower chords of Dia. 100-120 mm.
Vertical & diagonal members of Dia. 80-100 mm.
Sawn Zigba or Equivalent wooden Roof purlins of 50x70mm placed at c/c 900mm.
Supply & fix 8 mm thick chip wood ceilings. Price includes 40x50 mm zigba wooden battens with c/c spacing of 600 mm both ways, corner list and all other necessary accessories to complete the work.
Supply and fix G-30 ribbed sheet ceiling at verandah and under eaves. Price shall include 40 x50mm wooden battens c/c spacing of 600mm both ways, corner list, three coats of synthetic enamel paint, and all other necessary accessories
Supply and fix 25x250mm well seasoned and treated timber Fascia board. Price shall include preservative and weather resistant oil paint.
METAL WORK
Metal doors shall be manufactured from 38X1.5mm LTZ frame profile. Doors shall be fully made of 0.8 mm thick ribbed sheet all as per the Engineer’s approval and door schedule. Security RHS grill of (30*20*1.25) mm spaced at 12cm vertically including. Unit price shall include two coats of anti-rust and three coats of synthetic enamel paint, locks, hinges, and any other accessories to complete the work.
Metal windows and Doors of HARD MESH manufactured from 40*40*2mm RHS/38X1.5mm LTZ frame profile all as per the Engineer’s approval and window schedule. Security RHS grill of (30*20*1.25) mm spaced at 12cm vertically. Unit price shall include two coats of anti-rust and three coats of synthetic enamel paint, locks, hinges, and any other accessories to complete the work.
FINISHING
Apply two coats of plastering for external HCB walls,beams and columns with cement sand mortar (1:3).
Apply three coats of plastering to internal walls, verandah wall, and exposed beams &columns in cement sand mortar (1:3). Price shall include pre-cleaning and preparation of the surfaces.
Supply and fix 50mm thick screed flooring with cement sand ratio of 1:3.
Supply & fix 30cm diameter and 10cm thick cast Insitu half concrete pipe ditch for storm water drainage. Price includes excavation, back fill and all other necessary materials to full fill the job.
PAINTING
Apply three coats of synthetic/plastic paint to internal plastered wall surfaces, beams,columns, ceilings and other surfaces.
Apply three coats of synthetic/plastic paint to external wall surface all as per the manufacturers instruction.Price shall include primer and other necessary works.
ELECTRICAL INSTALLATION
Flash mounted metal enclosures Main distribution board ,
LIGHT POINTS
Light points in GI conduit of diameter 20 mm fed through PVC conductor of 3 x 2.5sq mm color coded and labeled with accessories
Light Fittings and Lamps
SWITCHES
SOCKET OUT LET
Member
m2, total site clearance
m3, total Bulk excavation
m3, total pit excavation
m3, total trench excavation
m3, total cart away
m2, total hard core
m3, total masonary foundation
Shape of bar
Footing Column
Grade Beam
Ground Floor slab
m2, total pad
m2, total f/column
m2, total Grade beam Formwork
m2, total of top tie beam
Member
m2, total lean concrete under pad
m2, total lean concrete under masonary
m3, total of f/pad
m3, total of f/column
m3, total of grade beam
m2, total ground floor slab concrete
ml, total expansion joint
m3, Total of Elevation Column
m3, total of top tie beam
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
LRFP - 2026 - 9207112 Merged.pdf
Bidding document • 1.48 MB
Annex - F Lot-1 - DRAWING-AR_ST-UNICEF Jigjiga Field Office-Vehicle Parking Shade.pdf
Bidding document • 0.24 MB
Annex - F Lo t- 2 - DRAWING-AR_ST-UNICEF Jigjiga Field Office-Generator House Lot 1.pdf
Bidding document • 0.36 MB
Annex - G - revised_BoQ-UNICEF Jigjiga Field Office-Vehicle Parking Shade and Generator House.xlsx
Bidding document • 1.08 MB
Minutes of Pre-bid meeting LRFP-9207112.pdf
Bidding document • 0.83 MB
Clarification No. 1 LRFP-2026-9207112.pdf
Bidding document • 0.08 MB
Notice on UNGM.html
Notice page • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .