Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Clarification
Applicability of Variation of Quantities ClauseSection II states that UNOPS may vary the quantity by ±20%, but the clause ends with “NA” and Form D marks it “NA”. Please confirm whether the variation clause applies to this ITB.Confirmed. The quantity variation clause is Not Applicable (NA) for this invitation to bid. The required quantity remains fixed at exactly 4 units.The document states that Consignee and delivery details will be introduced along with the Contract. Please confirm if general delivery warehouse coordinates within Lilongwe can be shared now to allow accurate freight and logistics pricing.Exact offloading site coordinates and delivery points within Lilongwe will be disclosed only to the selected winning contractor at the time of contract award. For financial offer preparation, bidders must calculate logistics based on standard commercial DAP Lilongwe.Routine Maintenance Pricing StructurePlease confirm whether the pricing for the routine maintenance packages requested in Annex 2 should be included within the core vehicle unit price on Form C, or if it must be quoted as a separate, distinct line item.All routine maintenance support frameworks requested under Annex 2 must be priced independently. Bidders must not bundle or combine these service fees into the primary ex-factory or DAP vehicle unit prices on Form C.Cost Allocation for Fast-Moving ConsumablesPlease clarify if the fast-moving consumables listed in line with Annex 1 must be supplied as part of the initial vehicle delivery cost, or if the list is for separate unit pricing evaluation only.The detailed Annex 1 Consumables List is intended for separate financial line-item evaluation and future procurement planning. Bidders must provide independent unit rates for these components separate from the core 4-unit mobile laboratory cost.Evaluation of Quantity DiscountsIf a quantity discount is offered in Form C, please clarify if it will be evaluated against the baseline requirement of 4 units, or if it would only apply if UNOPS decides to alter the final order volume.Because the variation of requirements clause is designated as Not Applicable (NA), any quantity discounts submitted by bidders within Form C will be evaluated directly against the core baseline project volume of 4 unitsEx-Stock Age Limit DefinitionFor ex-stock deliveries, the vehicle's age must not exceed 12 months, calculated from the date of manufacture up to the date of delivery. Please confirm whether this 12-month limit is calculated up to the date of bid submission or up to the actual date of final DAP delivery in Lilongwe, Malawi.The maximum 12-month vehicle age threshold is calculated from the physical manufacturing line stamp up to the actual calendar date of final on-site DAP delivery and receipt in Lilongwe, Malawi.All other terms and conditions remain unchanged
Clarification
Delivery Period PrecedenceIn Section II – Schedule of Requirements, the delivery period is stated as 60 to 150 calendar days. However, in the Price Schedule, the delivery period is indicated as 30 to 120 days after Contract signature. Could you please confirm which delivery period shall prevail for the preparation and submission of our bid? Specifically, please confirm whether the maximum acceptable delivery period is 120 calendar days or 150 calendar days. The timeline set forth in Section II (Schedule of Requirements) takes precedence. The maximum allowable delivery window for this procurement project is 150 calendar days from the date of mutual contract signing.Local Presence FulfillmentSection II requires the bidder to “have a presence in Malawi capable of servicing and repairing the vehicles”. Please confirm that an international bidder meets this requirement through an authorised local dealer or service agent in Malawi, identified in the bid with its contact details, instead of its own establishment.Confirmed. An international bidder satisfies this parameter by designating a fully certified, capable local partner, distributor, or service center established inside Malawi. Complete physical addresses, contacts, and stockholding capability statements must be submitted inside the proposalManufacturer’s Authorization Requirements (Form F)The mobile laboratory is a base vehicle chassis converted by a specialised body builder. Please confirm whether Form F must be issued by the converter (the manufacturer of the finished mobile laboratory), by the chassis manufacturer, or by both.Manufacturer’s Authorization (Form F) is required from both entities. Separate authorization forms must be provided by the primary automotive chassis manufacturer and the specialized laboratory conversion bodybuilder to guarantee complete equipment support.We hereby request clarification regarding the payment method. According to the payment terms set out in the Tender Particulars of the tender documents, the payee is specified as the Malawian distributor. Our company, a Chinese enterprise, is the bidder and the proposed contracting party for this project. The local Malawian company serves only as our cooperating distributor. We respectfully enquire whether our company may be designated directly as the beneficiary of the project funds upon completion of contract performance for this project.Under UNOPS financial and procurement guidelines, disbursements can only be executed directly to the exact legal entity that acts as the primary signing party to the contract (the main bidder). Financial disbursements to third-party distributors or secondary entities are not permitted.We kindly request clarification regarding the quantity of Mobile Laboratories required under this tender. In the Price Schedule, the item description states: “Supply and Delivery of 3 × Mobile Laboratories to Lilongwe, Malawi,” while the quantity listed is 4. However, in the other tender forms, the description states: “Supply and Delivery of 4 × Mobile Laboratories to Lilongwe, Malawi,” with a quantity of 4. Please confirm which item description is correct and clarify the total quantity of Mobile Laboratories required so that we can prepare our offer accordingly.The procurement title and remaining baseline tender forms are correct. The final total required quantity is 4 units of Mobile Laboratories. The typographical error within the description column of the Price Schedule has been amended and the following documents have been amended Registration Entity and Associated Fees and TaxesPlease confirm in whose name the vehicles must be registered. Please also confirm whether registration fees and number plates are to be included in the bid price, or whether they will be covered by the duty and tax exemption.Duties and taxes (Form C, columns ii and iii). UNOPS is exempt and will provide the exemption documents. Please confirm that non-Malawi bidders should quote excise duty and customs duty as 0%, and VAT as not applicable.In the event that local Malawi customs, tax, registration, or other competent authorities request documentation beyond items (i) to (viii), please confirm if UNOPS or the Consignee will provide local administrative assistance to secure them.The quotes should be free of the taxes. UNOPS will work with the consignee to acquire the necessary paperwork for duty exemption. The contractor holds ultimate commercial responsibility for the accuracy, legality, and completion of all clearance paperwork. UNOPS and the Consignee will provide exclusively the core duty and tax exemption certificates required under DAP Lilongwe terms.
Clarification
Laboratory Refrigerator Accuracy - Item 16Please confirm whether “accuracy of 0.1 degrees” refers to the display resolution or to temperature control accuracy. Please also confirm whether a 12/24 V DC compressor refrigerator is acceptable.The 0.1°C figure refers to the digital display resolution. Temperature control stability must be within ±1°C over the 2 to 8°C range. The refrigerator must be lockable, min. 60 litres, with a high/low temperature alarm.A 12/24 V DC compressor refrigerator is acceptable provided it also has a 230 V AC input. Only one refrigerator is required; the separate "12 V fridge" line is deleted.Laboratory Function and EquipmentPlease provide details regarding the intended laboratory functions, including:The types of tests to be performed and whether samples will be analysed onboard or only collected.The list of laboratory equipment and instruments to be installed.The expected number of staff working in the laboratory.Whether the laboratory equipment will be supplied by the manufacturer or provided separately.The mobile laboratories are intended for field screening of the quality of medicines (detection of substandard and falsified medicines) using the GPHF-Minilab, i.e. thin-layer chromatography (TLC), disintegration and colour-reaction tests. No biological samples will be handled. A maximum of 2 occupants will work in the laboratory at any time. .All laboratory cabinetry, fixed equipment and fixed installations in the Technical Specifications (including the ductless fume hood, flammable-solvent safety cabinet, refrigerator, sink, hand-wash unit, eyewash station, ventilation, generator and electrical system) must be supplied, integrated and installed by the contractor. The GPHF-Minilab kits, other non-fixed laboratory equipment and consumables will be procured separately; the layout must provide secure storage and bench space for them. Inverter Power Rating CorrectionThe specification requires a “pure sine wave inverter (1000 kW)”. We assume this means 1000 W (1 kW). Please confirm the required rating.Confirmed. “1000 kW” is a typographical error. However, a 1 kW inverter is not sufficient for the laboratory loads, so the requirement is amended to performance terms: a pure sine wave inverter and auxiliary battery bank (maintenance-free or lithium, with split-charge/DC-DC charging) sized to run the fume hood, extraction fan, refrigerator and lighting for at least 4 hours without the generator. Bidders must submit the sizing calculation . Electrical outlets shall be 230 V 50 Hz, Type G (BS 1363), with an external IEC 60309 (blue) 230 V shore-power inlet, automatic changeover between mains power, generator and inverter, and a consumer unit with RCD protection. Advanced Radio System Specifications - Item 19Please specify the type required: an in-vehicle entertainment radio, or a two-way VHF/HF communication radio. If it is a communication radio, please give the frequency band and any licensing requirements in Malawi.This feature refers to a professional two-way VHF mobile radio for remote operational communication: min. 25 W output, 136 to 174 MHz, programmable, with vehicle-mounted antenna. Equipment must be technically compatible with Malawi regulatory requirements. The end-user Ministry will finalise frequency allocation and licensing with the Malawi Communications Regulatory Authority (MACRA) after delivery.Factory Acceptance Test (FAT) RequirementsPlease confirm whether UNOPS or the end user intends to witness the FAT. If so, please confirm whether the bidder must include the travel and accommodation costs of the inspectors in its price, and for how many people.A Factory Acceptance Test (FAT) before shipment is mandatory because the vehicle is custom-built. The FAT shall include verification of the laboratory layout against the approved drawing, an electrical load test, a ventilation test, and checks of the fume hood face velocity, airflow alarm and filter-saturation alarm .UNOPS reserves the right to request a virtual FAT. If an in-person FAT is required, an amendment will state the number of inspectors, and bidders will be asked to price inspector travel and accommodation separately. UNOPS also reserves the right to contract an external party to attend the FAT.Ventilation and Negative Pressure Fit-OutItem 22 refers to pressure “relative to the rest of the clinic”, a “face velocity at standard working sash height” and the “exact hood width”. This suggests a fume hood or a biological safety cabinet, but no such equipment is listed elsewhere. Please confirm: (a) whether a fume hood or biosafety cabinet must be supplied and installed in each laboratory, and if so its type, class and size; (b) whether the requirement is limited to a roof-mounted extraction blower keeping the laboratory compartment under negative pressure.(a) A biological safety cabinet is not required; the laboratory will not handle biological samples. Instead, a ductless (recirculating, filtered) bench-top chemical fume hood shall be supplied and installed on the near-side (LHS) work bench. It shall comply with EN 17242 or NF X 15-211 (Class 1), have a min. 800 mm internal working width (large enough for TLC developing tanks), face velocity 0.4 to 0.5 m/s (80 to 100 fpm) at the working sash opening, an airflow alarm and a filter-saturation alarm, and an activated-carbon filter suitable for the solvent, ammonia and acetic acid vapours used in GPHF-Minilab methods. Two spare filter sets per vehicle shall be supplied.(b) No high-volume ducted exhaust is required. General ventilation shall be provided by a roof-mounted extraction fan (approx. 10 air changes per hour) keeping the laboratory under slight negative pressure relative to the driver’s cab, with filtered, insect-screened make-up air. The text referring to “the rest of the clinic”, the explosion-proof blower and 250 to 350 CFM will be deleted. Additional chemical-safety requirements: under-bench ventilated safety cabinet for flammable solvents (EN 14470-1 or equivalent); lockable storage for Minilab kits and reference standards; sealed chemical-waste containers (chemical waste must not go to the sink waste tank); blackout blinds for UV reading of TLC plates; eyewash station; chemical spill kit; PPE storage; carbon monoxide detector; chemical-resistant, seamless surfaces.Split Warranty StructuresPlease confirm that the 36 months / 100,000 km warranty may be provided as the chassis manufacturer’s warranty for the base vehicle plus the converter’s warranty for the laboratory conversion and equipment, both backed by the bidder.This split structure is acceptable. The vehicle warranty can combine the standard chassis manufacturer's coverage alongside the specialized body converter's warranty. However, the primary contracted bidder remains solely and legally liable to UNOPS for the unified execution and coverage of all warranty items.
Clarification
Base Vehicle SpecificationsThe manufacturer has noted some inconsistencies in the vehicle specifications, with different clauses indicating different vehicle types. Kindly clarify the acceptable makes and models of the base vehicles for this project.UNOPS does not specify particular vehicle makes or models, to ensure open, fair and unrestricted competition. Bidders may propose any make or model that meets or exceeds the technical requirements. UNOPS acknowledges that some clauses of the Technical Specifications describe different vehicle types. Document Amendment 2 - ITB_2026_64755 - Section II - Schedule of Requirements - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi details the design-specific features (fixed dimensions, suspension layout, tyre size, drivetrain type) with performance-based requirements, so that several makes and models can comply. Bidders should prepare their offers against the specifications as amended. The deleted text is struck out in red and the added text is Bolded Blue while the unchanged text remains unbolded blackThe sample pictures and technical layout drawing in the tender are indicative of the laboratory layout only. The base vehicle shown in the photographs is not a requirement, and bidders are not expected to offer that make or model.Light Truck SuitabilityCould you accept a light truck as the base vehicle?Yes, with conditions. Following review, the base vehicle may be either (a) a factory-new 4x4 panel van, or (b) a factory-new 4x4 cab-chassis (light truck) fitted with a purpose-built, insulated laboratory body (GRP or aluminium sandwich panel). Pickups with an open load bed or canopy are not acceptable.In both cases the vehicle must be of body-on-frame (ladder chassis) construction, have a solid sealed partition between the driver's cab and the laboratory with a lockable pass-through hatch and intercom, and give the laboratory its own lockable access door. GVW must not be exceeded when fully equipped; bidders must submit a weight calculation showing at least 10% margin below GVW. Body Dimension TolerancesDue to the body dimension being fixed at 5669mm * 2010mm * 2280mm, could you accept a deviation? If yes, please provide the acceptable range.The fixed external dimensions will be replaced by an external envelope and minimum internal laboratory dimensions, as follows:External: overall length 5,600 to 6,800 mm; overall width max. 2,200 mm (excluding mirrors); overall height max. 3,000 mm including roof-mounted air conditioner and extraction unit.Laboratory compartment (internal): length min. 3,200 mm; width min. 1,700 mm; clear standing height min. 1,850 mm, and min. 2,000 mm clear height at the fume hood location.The ±5% tolerance no longer applies. Bidders must submit a dimensioned layout drawing showing that all fittings in the indicative technical layout drawing, plus the fume hood, fit within the laboratory. Ground Clearance RequirementsA minimum ground clearance of 300 mm is above the standard figure for most factory 4x4 van chassis. Please confirm whether 300 mm is mandatory, or whether a lower value (for example ≥ 220 mm) would be considered substantially compliant.Following review, the ground clearance requirement is amended. The minimum is now 250 mm, measured at the lowest point of the chassis (under the front or rear differential) at Gross Vehicle Weight, per the chassis manufacturer's published data.In addition, for rural rough-terrain operation, a steel underbody protection for engine, transmission, transfer case and fuel tank, with the generator housing and water tanks protected or mounted above the axle line is required.Aftermarket suspension lifts that affect the chassis manufacturer's warranty will not be accepted. Drivetrain AcceptabilityCould you explain the transmission 4-wheel drive (part time)? Could you accept 4*2 wheel drive? Please confirm if 2-wheel drive is acceptable?A 4-wheel drive system with high/low-range transfer case is mandatory because of rural road conditions in Malawi. Either a selectable (part-time) 4WD system, which the driver engages for rough terrain and disengages on paved roads, or a permanent (full-time) 4WD system is acceptable.2-wheel drive (4x2) vehicles are not acceptable. The transmission requirement is amended to: manual, minimum 5 forward speeds plus reverse. Differential and EBD RequirementsWe would like to clarify whether it is mandatory to provide a differential and EBD? Could you accept the vehicle without a differential and EBD?The intent of this clause is traction in rough terrain. The requirement is clarified as: rear differential lock or limited-slip differential is mandatory; front differential lock or electronic traction control is desirable. ABS with Electronic Brakeforce Distribution (EBD) is mandatory. Bids offering vehicles without ABS/EBD or without a rear differential lock/limited-slip differential will be considered non-compliant. Window Specification DiscrepanciesThe window requirements contradict each other: “2 sliding windows to right-hand side”, “3 sliding on RHS”, “2 sliding on LHS” and “1 sliding window to left-hand side with privacy glass”. Please confirm the exact number of windows required on each side, and which ones need privacy glass.The corrected requirement, and consistent with the indicative technical layout drawing, is: 3 sliding windows on the right-hand side (RHS) above the desk/worktop and 2 sliding windows on the left-hand side (LHS) above the work bench, all with privacy glass and insect screens.Laboratory windows must be closable and sealable so that negative pressure can be maintained during laboratory operation.Generator Noise Level Testing Conditions - Item 13Please confirm the distance and conditions at which the 60 dB maximum noise level is measured (for example at 7 m in open field).The maximum noise level of 60 dB(A) for the diesel generator is measured at 7 metres under open-field conditions.Note that the generator rating is amended: the generator must be rated at min. 125% of the laboratory's maximum simultaneous electrical load (air conditioner, fume hood, extraction fan, refrigerator, lighting and battery charger). Bidders must submit the load calculation with their offer.
Amendment #2
Amendment 2:This amendment is to: Respond to all clarifications received through eSourcing.Amend document ITB_2026_64755 - Section II - Schedule of Requirements - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi and Amendment 2 - ITB_2026_64755 - Section III - Returnable Bidding Form D_ Technical Bid Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi to align with the amended technical clarifications. To help track the amendment, updated specifications are in bold blue text, whereas deleted requirements are indicated with a red strikethrough.Extend the bid closing date of of ITB/2026/64755 Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi from November 17, 2026 until November 24, 2026Therefore the following documents have been uploaded to the Documents Section of the ITB:Amendment 2 - ITB_2026_64755 - Section II - Schedule of Requirements - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - MalawiAmendment 2 - ITB_2026_64755 - Section III - Returnable Bidding Form D_ Technical Bid Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - MalawiAmendment 2 - Clarifications - ITB_2026_64755 - Supply and Delivery Of 4 X Mobile Laboratories to LilongweThe General Tab of the ITB now reads: Deadline * 2026-11-24 13:00 UTCAll the other terms and conditions for this ITB remain unchanged.
Amendment #2
Amendment 2:This amendment is to: Respond to all clarifications received through eSourcing.Amend document ITB_2026_64755 - Section II - Schedule of Requirements - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi and Amendment 2 - ITB_2026_64755 - Section III - Returnable Bidding Form D_ Technical Bid Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi to align with the amended technical clarifications. To help track the amendment, updated specifications are in bold blue text, whereas deleted requirements are indicated with a red strikethrough.Extend the bid closing date of of ITB/2026/64755 Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi from November 17, 2026 until November 24, 2026Therefore the following documents have been uploaded to the Documents Section of the ITB:Amendment 2 - ITB_2026_64755 - Section II - Schedule of Requirements - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - MalawiAmendment 2 - ITB_2026_64755 - Section III - Returnable Bidding Form D_ Technical Bid Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - MalawiAmendment 2 - Clarifications - ITB_2026_64755 - Supply and Delivery Of 4 X Mobile Laboratories to LilongweThe General Tab of the ITB now reads: Deadline * 2026-11-24 13:00 UTCAll the other terms and conditions for this ITB remain unchanged.
Amendment #1
Amendment 1:This amendment is to:Extend the bid closing date of of ITB/2026/64755 Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi from November 04, 2026 until November 17, 2026Extend bid clarification closing date of of ITB/2026/64755 Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi from October 22, 2026 until November 04, 2026Bidder kindly note the following regarding ITB-2026-64755:Clarifications: We will issue a separate amendment shortly to respond to all questions submitted via e-Sourcing.Submission Requirements: All bids must be based on the final, revised technical specifications and clarification responsesResubmission Right: Bidders who have already submitted a bid may withdraw and resubmit an updated bid in light of the upcoming amendment(s).Evaluation Criteria: We will evaluate only bids compliant with the latest specifications and information. Bids based on previous versions will be considered non-responsive. Therefore the General Tab of the ITB now reads:Deadline * 2026-11-17 13:00 UTCDeadline for clarifications * 2026-11-04 10:00 UTC
Tender Value
Refer Docs
Bid Security (EMD)
Refer Docs
Closing Date
24 Nov 2026, 13:00 (UTC)2d left24 Nov 2026, 6:30 pm IST
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender description: Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/Guides Interested in improving your knowledge of what UNOPS procures, how we procure and how to become a vendor to supply to our organization? Learn more about our free online course on “Doing business with UNOPS” here
317499
ITB/2026/64755
Invitation to bid
Malawi
INVITATION
UTC
21 Nov 2026
9 Oct 2026
ITB_2026_64755 - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi Spare parts (Fast moving consumables and Frequently changed parts) This work sheet has two tabs (Tab 1 - Fast Moving Consumables and Tab 2 - Frequently Changed Parts.) Bidder is requested to provide a list of fast moving consumables and frequently changed parts in the respective tabs. Please note that this information will not be evaluated as part of the bidding process. It is collected solely to assist the client with future vehicle maintenance planning
Fast Moving Consumables for the Mobile Laboratories
No. Item Name Unit Price (USD)
Name of Company Representative:
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative and company stamp:
This Form should be submitted in PDF format signed & stamped
ITB_2026_64755 - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi Spare parts (Fast moving consumables and Frequently changed parts) This work sheet has two tabs (Tab 1 - Fast Moving Consumables and Tab 2 - Frequently Changed Parts.) Bidder is requested to provide a list of fast moving consumables and frequently changed parts in the respective tabs Please note that this information will not be evaluated as part of the bidding process. It is collected solely to assist the client with future vehicle maintenance planning
Frequently Changed Parts for the 3 x Mobile Laboratories
No. Item Name Unit Price (USD)
Name of Company Representative:
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative and company stamp:
This Form should be submitted in PDF format signed & stamped
ITB_2026_64755 - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi Routine Maintenance Checklist
No. Maintenance Service Interval/ Mileage Services Offered Unit Price (per vehicle) Total Price (4 vehicles)
Bidder can include other service intervals considered below:
Name of Company Representative:
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative and company stamp:
This Form should be submitted in PDF format signed & stamped
Sr. No ITEM QUANTITY Unit Price FCA Incoterms 2020 Freight Cost Insurance Cost Inland Delivery Costs Cost of Unloading at destination Lilongwe, Malawi UNIT PRICE DAP incoterms 2020 ( including insurance and unloading) SUB TOTAL PRICE DAP incoterms 2020 ( including insurance and unloading at destination) Total Custom Clearance Cost (port of discharge and at the border into Malawi) Total Excise Duty (Indicate percentage) Total Customs Duty (Indicate percentage) Total Value Added Tax (VAT) (Indicate percentage) GRAND TOTAL PRICE ( including subtotal price, custom clearance, duties and taxes) Delivery Period/ Time from confirmed order. As time is of the essence , bidder shall deliver the goods within 30 to 120 days after Contract signature. If bidders cannot meet the 30 to 120 days delivery period, please quote the closest but firm delivery period Brand / Model Number Country of Origin of Product FCA point of delivery Shipment dimensions of offered products (Including package)
USD USD USD USD USD USD USD USD USD USD USD USD Gross weight Volume
A B C D E F = A+B+C+D+E G = Qty x F (i) (ii) (iii) (iv) H=G+(i+ii+iii+iv)
1 Supply and Delivery of 3 x Mobile Laboratories to Lilongwe - Malawi Lilongwe, Malawi 4 0 0 0
Sub Total Vehicle (FCA) (A)
Total freight Cost , Incoterms 2020) (B)
Total Insurance Cost , Incoterms 2020) (C)
Total inland transport cost (USD) (D)
Total unloading costs, Incoterms 2020) (E)
Unit Cost of Vehicle inclusive of Insurance, Freight, Inland Delivery & Unloading (Incoterms 2020 - DAP) (USD) (F) = A+B+C+D+E 0
Sub Total Cost of Vehicles (Incoterms 2020 - DAP) (USD) (G)= F * 4 0
Total Customs Clearance cost (USD) (i)
Excise Duty (ii)
Customs Duty (iii)
Value Added Tax (VAT) (iv)
Grand Total Price (USD) (H) = G+i+ii+iii+iv 0
The offered Vehicles and related services (if applicable) are in accordance with the required specifications and requirements specified in Section II: Schedule of Requirements. I, the undersigned, certify that I am duly authorized to sign this bid and bind [insert full name of bidder] should UNOPS accept this bid:
Name of Company Representative:
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative and company stamp:
This Form should be submitted in PDF format signed & stamped together with an excel format
ITB_2026_64755 - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi Name of Bidder: (Insert name of Bidder) Returnable Bidding Form D: Technical Bid Form Any brand-Referenced specifications provided in this tender is for guidance only and is not restrictive. Bidders are to quote for items that are fit for purpose and meet the minimum technical specifications stipulated in the technical specification sheet provided by UNOPS.
1. Technical specifications for Vehicles – Comparative Data Table
Feature UNOPS Minimum Technical Requirements Is your Bid compliant? Yes/No Provide the detailed specifications of what you are quoting (Insert details of vehicles offered, including specifications and brand/model) (Bidder to complete)
1 General The vehicle must be a van, factory new and of current model when supplied, strongly built and engineered for rough road conditions and tropical conditions. Off-road, heavy duty suspension with a reinforced ladder-fame chasis. There should be a solid sealed partition between the driver and the lab with a lock-able pass-through hatch or winder. ☐ Yes ☐ No
2 Body Length: 5669 mm ☐ Yes ☐ No
Width: 2010 mm ☐ Yes ☐ No
Height: 2280 mm ☐ Yes ☐ No
3 Ground Clearance Minimum 300 mm ☐ Yes ☐ No
4 Wheel Base Minimum 3050 mm ☐ Yes ☐ No
5 Transmission 5–6 speed manual transmission plus one reverse gear ☐ Yes ☐ No
4-wheel drive (part time) ☐ Yes ☐ No
Differential ☐ Yes ☐ No
High/low transfer gears ☐ Yes ☐ No
6 Suspension Independent double wishbone with oil spring in front ☐ Yes ☐ No
Rear leaf spring ☐ Yes ☐ No
7 Steering Right-hand drive (RHD) ☐ Yes ☐ No
Power assisted ☐ Yes ☐ No
Radio controls on the steering ☐ Yes ☐ No
8 Brakes ABS braking system ☐ Yes ☐ No
Mechanical parking brake operating on transmission or rear wheels ☐ Yes ☐ No
9 Wheels and Tyre Size 265/65R17C on alloy rims ☐ Yes ☐ No
Full-size spare wheel ☐ Yes ☐ No
10 Fuel Tank Capacity 80 litre fuel tank with lid 60- 80 liter reserve tank ☐ Yes ☐ No
11 Floor 12 mm plywood floor overlaid with anti-slip vinyl ☐ Yes ☐ No
Linings ☐ Yes ☐ No
Wipe-clean linings with insulation on side and roof that are white in colour ☐ Yes ☐ No
12 Windows 2 sliding windows to right-hand side 3 sliding on RHS 2 sliding on LHS" Privacy glass 1 sliding window to left-hand side with privacy glass ☐ Yes ☐ No
13 Generator Generator housing complete with access door vented through the floor External generator locker at rear with slide-out 2.5 kVA generator Diesel with max noise of 60dB ☐ Yes ☐ No
14 Air Conditioning Over-cab mounted air conditioning vented into mobile lab 12000BTU ☐ Yes ☐ No
15 Near Side All Worktop/cupboards should be fixed. Work bench with storage shelf under Fixed and lockable cupboards All worktops and benches should be chemical resistant and non-porous and can withstand repeated disinfection (epoxy resin)" ☐ Yes ☐ No
16 Off Side Fixed desk area for 2 occupants with 2 secured swivel chairs Worktop with lockable cupboards, shelves and drawers Battery and inverter cupboard at rear accessed from rear doors Sink and cold-water tap with pump and waste-water tank 2℃~8℃ Refrigerator capacity of 60Liters with an accuracy of 0.1degrees that is lockable ☐ Yes ☐ No
17 Water Underfloor fresh and waste water tanks with level indicator that are at least 50 L each for fresh water and waste water. ☐ Yes ☐ No
Water containers with drain taps ☐ Yes ☐ No
External filler for fresh-water tank ☐ Yes ☐ No
18 Electrics Heavy-duty maintenance-free batteries with split-charge relay ☐ Yes ☐ No
Pure sine wave inverter (1000 kW) ☐ Yes ☐ No
Battery charger ☐ Yes ☐ No
Switch-over from generator to inverter ☐ Yes ☐ No
Multi-power socket to N/S and O/S worktop in ducting (flat pin socket) ☐ Yes ☐ No
12 V hand wash unit (waste to tank) ☐ Yes ☐ No
Heater and water pump operate when engine is running ☐ Yes ☐ No
240 V hook socket on external panel ☐ Yes ☐ No
Interior overhead lighting with switch near entrance door ☐ Yes ☐ No
Key-out facility ☐ Yes ☐ No
12 V lab electrics via auxiliary battery ☐ Yes ☐ No
Consumer unit ☐ Yes ☐ No
19 Miscellaneous 2 Fire extinguisher, one ABC and one CO2, at least 2 kgs ☐ Yes ☐ No
First aid kit - Type B ☐ Yes ☐ No
Advanced radio system ☐ Yes ☐ No
Cloth seats ☐ Yes ☐ No
Manufacturer-approved pack and tool kit ☐ Yes ☐ No
Two reflective red warning triangles ☐ Yes ☐ No
Owner's manual in English ☐ Yes ☐ No
Chrome roll bar ☐ Yes ☐ No
Chrome nudge bar ☐ Yes ☐ No
20 Instruments Speedometer ☐ Yes ☐ No
Tamperproof odometer ☐ Yes ☐ No
Fuel gauge ☐ Yes ☐ No
Low fuel warning light ☐ Yes ☐ No
Engine temperature gauge ☐ Yes ☐ No
Oil pressure gauge ☐ Yes ☐ No
Tachometer/trip meter ☐ Yes ☐ No
Water temperature gauge ☐ Yes ☐ No
21 Pre-delivery PDI undertaken by the manufacturer's authorized dealer or representative in Malawi, including all identification marks, reflectors and registration required by the laws of Malawi Factory Acceptance Test before shipment as it's custom made ☐ Yes ☐ No
22 Ventilation Negative Pressure: The laboratory testing zone must maintain a negative pressure of at least \(-0.02\text{ inches of water gauge (w.g.)}\) relative to the rest of the clinic. Roof-mounted, spark-resistant centrifugal blower (AMCA Type A or B explosion-proof rating if handling volatile solvents). Face Velocity: Maintain \(80\text{ to }100\text{ feet per minute (fpm)}\) at standard working sash height. Air Volume Flux: Approximately \(250\text{ to }350\text{ cubic feet per minute (CFM)}\) depending on the exact hood width and sash opening profile. ☐ Yes ☐ No
23 Warranty Full warranty of minimum 36 months or 100,000 km, whichever comes first Locally authorized service agent in Malawi
2. Delivery requirements - Comparative Data Table
UNOPS Requirements Is your Bid compliant? Yes/No Insert details of your acceptance of the stated requirement (Bidder to complete)
Delivery time Delivery within 90 to 150 calendar days. Bidders shall confirm their ability to meet this maximum delivery period and should provide a realistic and firm delivery timeline, taking into account all relevant activities, including manufacturing /procurement, export permits and licences, shipping, customs clearance, and delivery to the final destination. The proposed delivery timeline shall be realistic, achievable and consistent with the complexity and specific requirements of the procurement. Bidders are encouraged to propose an earlier delivery period where feasible; however, delivery beyond the maximum 150-calendar-day period will not be acceptable unless expressly approved by UNOPS in accordance with the applicable contractual provisions. Following dispatch/shipment of the Vehicles, the Contractor shall provide UNOPS with a clear shipment and delivery plan, including the expected date of arrival, shipping documentation, tracking information where applicable, and any other information necessary to monitor progress through to final delivery. ☐ Yes ☐ No
Inspection Testing and acceptance All motor vehicles shall be delivered in a fully operational, roadworthy and ready-to-use condition and shall comply with all specifications and requirements set out in the Contract. Prior to formal acceptance by UNOPS, the vehicles shall be subject to inspection and functional testing to verify conformity with the required specifications, including the vehicle's condition, accessories, safety features, equipment, documentation and other applicable requirements. UNOPS shall formally accept the vehicles only upon satisfactory completion of the inspection and functional testing and confirmation that all contractual requirements have been met. ☐ Yes ☐ No
Warranty Bidders must ensure that items are delivered in a new and undamaged condition, utilizing robust packaging to prevent defects during transit. Any goods arriving unpackaged or unassembled will not be accepted. The supplier shall provide a minimum warranty period as indicated in the minimum technical requirements for each item. ☐ Yes ☐ No
Delivery place and Incoterms rules The Bidder shall accept the conditions for on-site delivery in Malawi under Incoterms® 2020 DAP – Lilongwe, Malawi. The awarded Contractor shall submit a pro-forma invoice to UNOPS promptly upon issuance of the Purchase Order/Contract, as applicable. Upon dispatch of the vehicles, the Contractor shall provide UNOPS with copies of all relevant shipping and transportation documents within two (2) calendar days of dispatch, including tracking information where applicable, to facilitate timely monitoring of the shipment and customs clearance process. UNOPS and/or the consignee shall provide the selected Contractor with the applicable duty and tax exemption documentation, where relevant, to facilitate customs clearance in accordance with applicable procedures. For purposes of customs clearance and processing of applicable tax and duty exemptions, the Contractor shall provide all required shipping and commercial documentation, including, but not limited to: i. Air Waybill (AWB), Bill of Lading, or other applicable transport document; ii. Certificate of Origin; iii. Packing and Weight List; iv. Commercial Invoice; v. Planned Port of Entry; vi. Vehicle identification details, including chassis/VIN and engine numbers, where applicable; vii. Vehicle specifications and model details; and viii. Any other documentation required by the relevant Malawi customs, tax, registration or other competent authorities. The Contractor shall be responsible for ensuring that all documentation provided is accurate, complete and consistent with the vehicles being supplied, and shall promptly address any documentation deficiencies that may delay customs clearance or final delivery. Delivery shall be deemed complete only upon delivery of the vehicles to the designated UNOPS location in Lilongwe, Malawi, in accordance with the applicable DAP delivery terms and following satisfactory inspection and ☐ Yes ☐ No
Consignee details Will be introduced along with the Contract ☐ Yes ☐ No
Delivery details Will be introduced along with the Contract ☐ Yes ☐ No
UNOPS Right to vary requirements At the time the Contract is awarded, UNOPS reserves the right to vary the quantity of the goods and associated services specified above, provided this does not exceed +/-20%, without any change in the unit prices or other terms and conditions of the ITB. NA NA
3. Related services requirements
Service Is your Bid compliant? Yes/No Insert details of your acceptance of the stated requirement (Bidder to complete)
Warranty and Local After Sales Representation Vehicle Warranty at least 3 years and or up to 100,000 kilometers, whichever occurs first. ☐ Yes ☐ No
Vehicle Maintenance Services The Bidder should have a presence in Malawi capable of servicing and repairing the vehicles as well as keep stock of spare parts for the vehicle offered. Bidder to provide the following details (servicing location and contact) : Name, Physical address, P.O. Box number, telephone number, email address, and website address A list of routine maintenance packages to be provided in Annex 2 _ Routine Maintenance Packages. ☐ Yes ☐ No
Manuals Submission of User and Technical Manuals for the Vehicles - in English ☐ Yes ☐ No
4. Spare parts and fast moving consumables
Bidder shall provide a list of fast moving consumables and frequently changed parts line with Annex 1 _ Consumables List
5. Quantity Discounts
6. Ex-factory vehicles
All vehicles delivered must be brand new, straight from the production line (ex-factory). For ex-stock deliveries, the vehicle's age must not exceed 12 months, calculated from the date of manufacture up to the date of delivery.
ANY DEVIATION MUST BE LISTED BELOW:
I, the undersigned, certify that I am duly authorized by [insert full name of bidder] to sign this bid and bind [insert full name of bidder] should UNOPS accept this bid:
ITB_2026_64755 - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi Name of Bidder: (Insert name of Bidder) Returnable Bidding Form D: Technical Bid Form Any brand-Referenced specifications provided in this tender is for guidance only and is not restrictive. Bidders are to quote for items that are fit for purpose and meet the minimum technical specifications stipulated in the technical specification sheet provided by UNOPS.
1. Technical specifications for Vehicles – Comparative Data Table
Feature UNOPS Minimum Technical Requirements Is your Bid compliant? Yes/No Provide the detailed specifications of what you are quoting (Insert details of vehicles offered, including specifications and brand/model) (Bidder to complete)
1 General The vehicle must be a van, factory new and of current model when supplied, strongly built and engineered for rough road conditions and tropical conditions. Off-road, heavy duty suspension with a reinforced ladder-fame chasis. There should be a solid sealed partition between the driver and the lab with a lock-able pass-through hatch or winder. Factory-new 4x4 panel van OR 4x4 cab-chassis fitted with a purpose-built, insulated laboratory body engineered for rural, unpaved roads and tropical conditions. Gross Vehicle Weight (GVW) must not be exceeded when fully equipped with 2 occupants, full water tanks and all fixed equipment; bidder to submit a weight calculation showing at least 10% margin below GVW. A solid, sealed partition shall separate the driver's cab from the laboratory, with a lockable pass-through hatch and an intercom. The laboratory shall have its own lockable access door on the left-hand (near) side: a sliding side door for a panel van, or a hinged side door with fold-down step for a box body. Rear doors give access to the battery/inverter cupboard. Note: the sample pictures and layout drawing are indicative of layout only. The base vehicle shown is not a requirement, it's "indicative only". Rural-use requirements: "Steel underbody protection for engine, transmission, transfer case and fuel tank; generator housing and underfloor water tanks protected or mounted above the axle line. Wading depth min. 500 mm with raised air intake (snorkel) and extended axle/gearbox breathers. Heavy-duty air filter with pre-cleaner." ☐ Yes ☐ No
2 Body Length: 5669 mm Overall length should be between 5600 to 6800mm. Internal length should be a minimum of 3200mm and fit all laboratory fittings sufficiently ☐ Yes ☐ No
Width: 2010 mm Overall maxiumum width (excluding mirrors) whould be 2200mm. Minimum internal with should be 1700mm ☐ Yes ☐ No
Height: 2280 mm Overall maximum height should be 3000mm (including roof-mounted ac and extraction unit). Internal minimum height should be 1850mm that is standing height ☐ Yes ☐ No
Bidder to submit dimensioned layout. ☐ Yes ☐ No
3 Ground Clearance Minimum 300 mm Minimum 250 mm ground clearance at the lowest point of the chassis (under front/rear differential) at GVW, per the chassis manufacturer's published data. Aftermarket suspension lifts affecting the manufacturer's warranty will not be accepted. ☐ Yes ☐ No
4 Wheel Base Minimum 3050 mm Wheelbase as per manufacturer, sufficient to achieve the laboratory internal dimensions specified. ☐ Yes ☐ No
5 Transmission 4-wheel drive (part time)
High/low transfer gears
Manual transmission, minimum 5 forward speeds plus reverse. Selectable (part-time) or permanent 4-wheel drive with high/low-range transfer case. Rear differential lock or limited-slip differential mandatory; front differential lock or electronic traction control desirable. ☐ Yes ☐ No
Independent double wishbone with oil spring in front
6 Suspension Rear leaf spring ☐ Yes ☐ No
Manufacturer's heavy-duty 4x4 suspension rated for unpaved rural roads at full GVW, front independent or rigid axle. Laboratory equipment, cabinetry, fume hood, refrigerator and generator to be fitted on vibration-isolated mounts. ☐ Yes ☐ No
7 Steering Right-hand drive (RHD)
Radio controls on the steering Right-hand drive (RHD); power-assisted steering. ☐ Yes ☐ No
8 Brakes ABS braking system ☐ Yes ☐ No
Mechanical parking brake operating on transmission or rear wheels Parking brake (mechanical or electric) as per manufacturer ☐ Yes ☐ No
9 Wheels and Tyre Size 265/65R17C on alloy rims ☐ Yes ☐ No
Full-size spare wheel - All-terrain tyres of the manufacturer's recommended size, minimum 16-inch, on steel rims. Full-size spare wheel identical to road wheels ☐ Yes ☐ No
10 Fuel Tank Capacity 80 litre fuel tank with lid 60- 80 liter reserve tank Minimum 80 litres fuel capacity plus a 60L reserve tank (auxiliary tank acceptable), lockable fuel cap. Bidder to confirm in writing that the engine is approved by the manufacturer for Malawi fuel quality. ☐ Yes ☐ No
11 Floor 12 mm plywood floor overlaid with anti-slip vinyl
Wipe-clean linings with insulation on side and roof that are white in colour 12 mm marine plywood floor overlaid with seamless, welded-seam, anti-slip, chemical-resistant vinyl, coved min. Wipe-clean, non-porous, white linings with insulation on sides and roof, able to withstand repeated disinfection. ☐ Yes ☐ No
12 Windows 2 sliding windows to right-hand side 3 sliding on RHS 2 sliding on LHS" Privacy glass 1 sliding window to left-hand side with privacy glass 3 sliding windows on the right-hand (off) side above the desk/worktop and 2 sliding windows on the left-hand (near) side above the work bench, all with privacy glass and insect screens and blackout blinds (for UV reading of TLC plates). Laboratory windows to be closed and sealed during laboratory operation. ☐ Yes ☐ No
13 Generator Generator housing complete with access door vented through the floor External generator locker at rear with slide-out 2.5 kVA generator Diesel with max noise of 60dB Diesel generator in a sealed, vented, lockable locker at the rear of the near side, accessed externally, with slide-out tray; locker fully sealed from the laboratory, exhaust discharged away from the lab door and air-conditioner intake, rated min. 125% of the maximum simultaneous electrical load (bidder to submit load calculation with AC, fume hood, extractor refrigerator, lighting etc). Max. noise 65 dB(A) at 7 m, open field. ☐ Yes ☐ No
14 Air Conditioning Over-cab mounted air conditioning vented into mobile lab 12000BTU Roof- or over-cab-mounted air conditioner, min. 12,000 BTU/h cooling capacity, vented into the laboratory, operable from generator or 230 V mains power. Bidder to confirm heat load caculation at 35 degrees ☐ Yes ☐ No
15 Near Side All Worktop/cupboards should be fixed. Work bench with storage shelf under Fixed and lockable cupboards All worktops and benches should be chemical resistant and non-porous and can withstand repeated disinfection (epoxy resin)" Under-bench ventilated safety cabinet for flammable solvents, min. 30 litres capacity, with self-closing lockable doors, integral spill sump and a separate tray or compartment for acids/bases ☐ Yes ☐ No
16 Off Side Fixed desk area for 2 occupants with 2 secured swivel chairs Worktop with lockable cupboards, shelves and drawers Battery and inverter cupboard at rear accessed from rear doors Sink and cold-water tap with pump and waste-water tank 2℃~8℃ Refrigerator capacity of 60Liters with an accuracy of 0.1degrees that is lockable Laboratory refrigerator under worktop at the front, with tall cupboard above. Worktop with lockable cupboards, shelves and drawers, incorporating a stainless-steel sink with cold-water tap, pump and waste-water tank. Hand-wash unit with paper towel dispenser above. Eyewash station. Fixed desk area for 2 occupants with 2 swivel chairs that can be secured in transit. Battery and inverter cupboard at rear, accessed from rear doors. All worktops constructed with mositure and chemical resistance materials . Laboratory refrigerator: 2 to 8 °C, min. 60 litres, lockable, digital display with 0.1 °C resolution, temperature stability ±1 °C, high/low temperature alarm; 12/24 V DC compressor with 230 V AC input acceptable ☐ Yes ☐ No
17 Water Underfloor fresh and waste water tanks with level indicator that are at least 50 L each for fresh water and waste water. ☐ Yes ☐ No
Water containers with drain taps ☐ Yes ☐ No
External filler for fresh-water tank ☐ Yes ☐ No
18 Electrics Heavy-duty maintenance-free batteries with split-charge relay ☐ Yes ☐ No
Pure sine wave inverter (1000 kW) ☐ Yes ☐ No
Battery charger ☐ Yes ☐ No
Switch-over from generator to inverter ☐ Yes ☐ No
Multi-power socket to N/S and O/S worktop in ducting (flat pin socket) ☐ Yes ☐ No
12 V hand wash unit (waste to tank) ☐ Yes ☐ No
Heater and water pump operate when engine is running ☐ Yes ☐ No
240 V hook socket on external panel ☐ Yes ☐ No
Interior overhead lighting with switch near entrance door ☐ Yes ☐ No
Key-out facility ☐ Yes ☐ No
12 V lab electrics via auxiliary battery ☐ Yes ☐ No
Consumer unit ☐ Yes ☐ No
19 Miscellaneous 2 Fire extinguisher, one ABC and one CO2, at least 2 kgs ☐ Yes ☐ No
First aid kit - Type B ☐ Yes ☐ No
Advanced radio system ☐ Yes ☐ No
Cloth seats ☐ Yes ☐ No
Manufacturer-approved pack and tool kit ☐ Yes ☐ No
Two reflective red warning triangles ☐ Yes ☐ No
Owner's manual in English ☐ Yes ☐ No
Chrome roll bar ☐ Yes ☐ No
Chrome nudge bar ☐ Yes ☐ No
20 Instruments Speedometer ☐ Yes ☐ No
Tamperproof odometer ☐ Yes ☐ No
Fuel gauge ☐ Yes ☐ No
Low fuel warning light ☐ Yes ☐ No
Engine temperature gauge ☐ Yes ☐ No
Oil pressure gauge ☐ Yes ☐ No
Tachometer/trip meter ☐ Yes ☐ No
Water temperature gauge ☐ Yes ☐ No
21 Pre-delivery PDI undertaken by the manufacturer's authorized dealer or representative in Malawi, including all identification marks, reflectors and registration required by the laws of Malawi Factory Acceptance Test before shipment as it's custom made ☐ Yes ☐ No
22 Ventilation Negative Pressure: The laboratory testing zone must maintain a negative pressure of at least \(-0.02\text{ inches of water gauge (w.g.)}\) relative to the rest of the clinic. Roof-mounted, spark-resistant centrifugal blower (AMCA Type A or B explosion-proof rating if handling volatile solvents). Face Velocity: Maintain \(80\text{ to }100\text{ feet per minute (fpm)}\) at standard working sash height. Air Volume Flux: Approximately \(250\text{ to }350\text{ cubic feet per minute (CFM)}\) depending on the exact hood width and sash opening profile. ☐ Yes ☐ No
23 Warranty Full warranty of minimum 36 months or 100,000 km, whichever comes first Locally authorized service agent in Malawi
2. Delivery requirements - Comparative Data Table
UNOPS Requirements Is your Bid compliant? Yes/No Insert details of your acceptance of the stated requirement (Bidder to complete)
Delivery time Delivery within 90 to 150 calendar days. Bidders shall confirm their ability to meet this maximum delivery period and should provide a realistic and firm delivery timeline, taking into account all relevant activities, including manufacturing /procurement, export permits and licences, shipping, customs clearance, and delivery to the final destination. The proposed delivery timeline shall be realistic, achievable and consistent with the complexity and specific requirements of the procurement. Bidders are encouraged to propose an earlier delivery period where feasible; however, delivery beyond the maximum 150-calendar-day period will not be acceptable unless expressly approved by UNOPS in accordance with the applicable contractual provisions. Following dispatch/shipment of the Vehicles, the Contractor shall provide UNOPS with a clear shipment and delivery plan, including the expected date of arrival, shipping documentation, tracking information where applicable, and any other information necessary to monitor progress through to final delivery. ☐ Yes ☐ No
Inspection Testing and acceptance All motor vehicles shall be delivered in a fully operational, roadworthy and ready-to-use condition and shall comply with all specifications and requirements set out in the Contract. Prior to formal acceptance by UNOPS, the vehicles shall be subject to inspection and functional testing to verify conformity with the required specifications, including the vehicle's condition, accessories, safety features, equipment, documentation and other applicable requirements. UNOPS shall formally accept the vehicles only upon satisfactory completion of the inspection and functional testing and confirmation that all contractual requirements have been met. ☐ Yes ☐ No
Warranty Bidders must ensure that items are delivered in a new and undamaged condition, utilizing robust packaging to prevent defects during transit. Any goods arriving unpackaged or unassembled will not be accepted. The supplier shall provide a minimum warranty period as indicated in the minimum technical requirements for each item. ☐ Yes ☐ No
Delivery place and Incoterms rules The Bidder shall accept the conditions for on-site delivery in Malawi under Incoterms® 2020 DAP – Lilongwe, Malawi. The awarded Contractor shall submit a pro-forma invoice to UNOPS promptly upon issuance of the Purchase Order/Contract, as applicable. Upon dispatch of the vehicles, the Contractor shall provide UNOPS with copies of all relevant shipping and transportation documents within two (2) calendar days of dispatch, including tracking information where applicable, to facilitate timely monitoring of the shipment and customs clearance process. UNOPS and/or the consignee shall provide the selected Contractor with the applicable duty and tax exemption documentation, where relevant, to facilitate customs clearance in accordance with applicable procedures. For purposes of customs clearance and processing of applicable tax and duty exemptions, the Contractor shall provide all required shipping and commercial documentation, including, but not limited to: i. Air Waybill (AWB), Bill of Lading, or other applicable transport document; ii. Certificate of Origin; iii. Packing and Weight List; iv. Commercial Invoice; v. Planned Port of Entry; vi. Vehicle identification details, including chassis/VIN and engine numbers, where applicable; vii. Vehicle specifications and model details; and viii. Any other documentation required by the relevant Malawi customs, tax, registration or other competent authorities. The Contractor shall be responsible for ensuring that all documentation provided is accurate, complete and consistent with the vehicles being supplied, and shall promptly address any documentation deficiencies that may delay customs clearance or final delivery. Delivery shall be deemed complete only upon delivery of the vehicles to the designated UNOPS location in Lilongwe, Malawi, in accordance with the applicable DAP delivery terms and following satisfactory inspection and ☐ Yes ☐ No
Consignee details Will be introduced along with the Contract ☐ Yes ☐ No
Delivery details Will be introduced along with the Contract ☐ Yes ☐ No
UNOPS Right to vary requirements At the time the Contract is awarded, UNOPS reserves the right to vary the quantity of the goods and associated services specified above, provided this does not exceed +/-20%, without any change in the unit prices or other terms and conditions of the ITB. NA NA
3. Related services requirements
Service Is your Bid compliant? Yes/No Insert details of your acceptance of the stated requirement (Bidder to complete)
Warranty and Local After Sales Representation Vehicle Warranty at least 3 years and or up to 100,000 kilometers, whichever occurs first. ☐ Yes ☐ No
Vehicle Maintenance Services The Bidder should have a presence in Malawi capable of servicing and repairing the vehicles as well as keep stock of spare parts for the vehicle offered. Bidder to provide the following details (servicing location and contact) : Name, Physical address, P.O. Box number, telephone number, email address, and website address A list of routine maintenance packages to be provided in Annex 2 _ Routine Maintenance Packages. ☐ Yes ☐ No
Manuals Submission of User and Technical Manuals for the Vehicles - in English ☐ Yes ☐ No
4. Spare parts and fast moving consumables
Bidder shall provide a list of fast moving consumables and frequently changed parts line with Annex 1 _ Consumables List
5. Quantity Discounts
6. Ex-factory vehicles
All vehicles delivered must be brand new, straight from the production line (ex-factory). For ex-stock deliveries, the vehicle's age must not exceed 12 months, calculated from the date of manufacture up to the date of delivery.
ANY DEVIATION MUST BE LISTED BELOW:
I, the undersigned, certify that I am duly authorized by [insert full name of bidder] to sign this bid and bind [insert full name of bidder] should UNOPS accept this bid:
ITB_2026_64755 - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi Name of Bidder: (Insert name of Bidder) Returnable Bidding Form D: Technical Bid Form Any brand-Referenced specifications provided in this tender is for guidance only and is not restrictive. Bidders are to quote for items that are fit for purpose and meet the minimum technical specifications stipulated in the technical specification sheet provided by UNOPS.
1. Technical specifications for Vehicles – Comparative Data Table
Feature UNOPS Minimum Technical Requirements Is your Bid compliant? Yes/No Provide the detailed specifications of what you are quoting (Insert details of vehicles offered, including specifications and brand/model) (Bidder to complete)
1 General The vehicle must be a van, factory new and of current model when supplied, strongly built and engineered for rough road conditions and tropical conditions. Off-road, heavy duty suspension with a reinforced ladder-fame chasis. There should be a solid sealed partition between the driver and the lab with a lock-able pass-through hatch or winder. Factory-new 4x4 panel van OR 4x4 cab-chassis fitted with a purpose-built, insulated laboratory body engineered for rural, unpaved roads and tropical conditions. Gross Vehicle Weight (GVW) must not be exceeded when fully equipped with 2 occupants, full water tanks and all fixed equipment; bidder to submit a weight calculation showing at least 10% margin below GVW. A solid, sealed partition shall separate the driver's cab from the laboratory, with a lockable pass-through hatch and an intercom. The laboratory shall have its own lockable access door on the left-hand (near) side: a sliding side door for a panel van, or a hinged side door with fold-down step for a box body. Rear doors give access to the battery/inverter cupboard. Note: the sample pictures and layout drawing are indicative of layout only. The base vehicle shown is not a requirement, it's "indicative only". Rural-use requirements: "Steel underbody protection for engine, transmission, transfer case and fuel tank; generator housing and underfloor water tanks protected or mounted above the axle line. Wading depth min. 500 mm with raised air intake (snorkel) and extended axle/gearbox breathers. Heavy-duty air filter with pre-cleaner." ☐ Yes ☐ No
2 Body Length: 5669 mm Overall length should be between 5600 to 6800mm. Internal length should be a minimum of 3200mm and fit all laboratory fittings sufficiently ☐ Yes ☐ No
Width: 2010 mm Overall maxiumum width (excluding mirrors) whould be 2200mm. Minimum internal with should be 1700mm ☐ Yes ☐ No
Height: 2280 mm Overall maximum height should be 3000mm (including roof-mounted ac and extraction unit). Internal minimum height should be 1850mm that is standing height ☐ Yes ☐ No
Bidder to submit dimensioned layout. ☐ Yes ☐ No
3 Ground Clearance Minimum 300 mm Minimum 250 mm ground clearance at the lowest point of the chassis (under front/rear differential) at GVW, per the chassis manufacturer's published data. Aftermarket suspension lifts affecting the manufacturer's warranty will not be accepted. ☐ Yes ☐ No
4 Wheel Base Minimum 3050 mm Wheelbase as per manufacturer, sufficient to achieve the laboratory internal dimensions specified. ☐ Yes ☐ No
5 Transmission 4-wheel drive (part time)
High/low transfer gears
Manual transmission, minimum 5 forward speeds plus reverse. Selectable (part-time) or permanent 4-wheel drive with high/low-range transfer case. Rear differential lock or limited-slip differential mandatory; front differential lock or electronic traction control desirable. ☐ Yes ☐ No
Independent double wishbone with oil spring in front
6 Suspension Rear leaf spring ☐ Yes ☐ No
Manufacturer's heavy-duty 4x4 suspension rated for unpaved rural roads at full GVW, front independent or rigid axle. Laboratory equipment, cabinetry, fume hood, refrigerator and generator to be fitted on vibration-isolated mounts. ☐ Yes ☐ No
7 Steering Right-hand drive (RHD)
Radio controls on the steering Right-hand drive (RHD); power-assisted steering. ☐ Yes ☐ No
8 Brakes ABS braking system ☐ Yes ☐ No
Mechanical parking brake operating on transmission or rear wheels Parking brake (mechanical or electric) as per manufacturer ☐ Yes ☐ No
9 Wheels and Tyre Size 265/65R17C on alloy rims ☐ Yes ☐ No
Full-size spare wheel - All-terrain tyres of the manufacturer's recommended size, minimum 16-inch, on steel rims. Full-size spare wheel identical to road wheels ☐ Yes ☐ No
10 Fuel Tank Capacity 80 litre fuel tank with lid 60- 80 liter reserve tank Minimum 80 litres fuel capacity plus a 60L reserve tank (auxiliary tank acceptable), lockable fuel cap. Bidder to confirm in writing that the engine is approved by the manufacturer for Malawi fuel quality. ☐ Yes ☐ No
11 Floor 12 mm plywood floor overlaid with anti-slip vinyl
Wipe-clean linings with insulation on side and roof that are white in colour 12 mm marine plywood floor overlaid with seamless, welded-seam, anti-slip, chemical-resistant vinyl, coved min. Wipe-clean, non-porous, white linings with insulation on sides and roof, able to withstand repeated disinfection. ☐ Yes ☐ No
12 Windows 2 sliding windows to right-hand side 3 sliding on RHS 2 sliding on LHS" Privacy glass 1 sliding window to left-hand side with privacy glass 3 sliding windows on the right-hand (off) side above the desk/worktop and 2 sliding windows on the left-hand (near) side above the work bench, all with privacy glass and insect screens and blackout blinds (for UV reading of TLC plates). Laboratory windows to be closed and sealed during laboratory operation. ☐ Yes ☐ No
13 Generator Generator housing complete with access door vented through the floor External generator locker at rear with slide-out 2.5 kVA generator Diesel with max noise of 60dB Diesel generator in a sealed, vented, lockable locker at the rear of the near side, accessed externally, with slide-out tray; locker fully sealed from the laboratory, exhaust discharged away from the lab door and air-conditioner intake, rated min. 125% of the maximum simultaneous electrical load (bidder to submit load calculation with AC, fume hood, extractor refrigerator, lighting etc). Max. noise 65 dB(A) at 7 m, open field. ☐ Yes ☐ No
14 Air Conditioning Over-cab mounted air conditioning vented into mobile lab 12000BTU Roof- or over-cab-mounted air conditioner, min. 12,000 BTU/h cooling capacity, vented into the laboratory, operable from generator or 230 V mains power. Bidder to confirm heat load caculation at 35 degrees ☐ Yes ☐ No
15 Near Side All Worktop/cupboards should be fixed. Work bench with storage shelf under Fixed and lockable cupboards All worktops and benches should be chemical resistant and non-porous and can withstand repeated disinfection (epoxy resin)" Under-bench ventilated safety cabinet for flammable solvents, min. 30 litres capacity, with self-closing lockable doors, integral spill sump and a separate tray or compartment for acids/bases ☐ Yes ☐ No
16 Off Side Fixed desk area for 2 occupants with 2 secured swivel chairs Worktop with lockable cupboards, shelves and drawers Battery and inverter cupboard at rear accessed from rear doors Sink and cold-water tap with pump and waste-water tank 2℃~8℃ Refrigerator capacity of 60Liters with an accuracy of 0.1degrees that is lockable Laboratory refrigerator under worktop at the front, with tall cupboard above. Worktop with lockable cupboards, shelves and drawers, incorporating a stainless-steel sink with cold-water tap, pump and waste-water tank. Hand-wash unit with paper towel dispenser above. Eyewash station. Fixed desk area for 2 occupants with 2 swivel chairs that can be secured in transit. Battery and inverter cupboard at rear, accessed from rear doors. All worktops constructed with mositure and chemical resistance materials . Laboratory refrigerator: 2 to 8 °C, min. 60 litres, lockable, digital display with 0.1 °C resolution, temperature stability ±1 °C, high/low temperature alarm; 12/24 V DC compressor with 230 V AC input acceptable ☐ Yes ☐ No
17 Water Underfloor fresh and waste water tanks with level indicator that are at least 50 L each for fresh water and waste water. ☐ Yes ☐ No
Water containers with drain taps ☐ Yes ☐ No
External filler for fresh-water tank ☐ Yes ☐ No
18 Electrics Heavy-duty maintenance-free batteries with split-charge relay ☐ Yes ☐ No
Pure sine wave inverter (1000 kW) ☐ Yes ☐ No
Battery charger ☐ Yes ☐ No
Switch-over from generator to inverter ☐ Yes ☐ No
Multi-power socket to N/S and O/S worktop in ducting (flat pin socket) ☐ Yes ☐ No
12 V hand wash unit (waste to tank) ☐ Yes ☐ No
Heater and water pump operate when engine is running ☐ Yes ☐ No
240 V hook socket on external panel ☐ Yes ☐ No
Interior overhead lighting with switch near entrance door ☐ Yes ☐ No
Key-out facility ☐ Yes ☐ No
12 V lab electrics via auxiliary battery ☐ Yes ☐ No
Consumer unit ☐ Yes ☐ No
19 Miscellaneous 2 Fire extinguisher, one ABC and one CO2, at least 2 kgs ☐ Yes ☐ No
First aid kit - Type B ☐ Yes ☐ No
Advanced radio system ☐ Yes ☐ No
Cloth seats ☐ Yes ☐ No
Manufacturer-approved pack and tool kit ☐ Yes ☐ No
Two reflective red warning triangles ☐ Yes ☐ No
Owner's manual in English ☐ Yes ☐ No
Chrome roll bar ☐ Yes ☐ No
Chrome nudge bar ☐ Yes ☐ No
20 Instruments Speedometer ☐ Yes ☐ No
Tamperproof odometer ☐ Yes ☐ No
Fuel gauge ☐ Yes ☐ No
Low fuel warning light ☐ Yes ☐ No
Engine temperature gauge ☐ Yes ☐ No
Oil pressure gauge ☐ Yes ☐ No
Tachometer/trip meter ☐ Yes ☐ No
Water temperature gauge ☐ Yes ☐ No
21 Pre-delivery PDI undertaken by the manufacturer's authorized dealer or representative in Malawi, including all identification marks, reflectors and registration required by the laws of Malawi Factory Acceptance Test before shipment as it's custom made ☐ Yes ☐ No
22 Ventilation Negative Pressure: The laboratory testing zone must maintain a negative pressure of at least \(-0.02\text{ inches of water gauge (w.g.)}\) relative to the rest of the clinic. Roof-mounted, spark-resistant centrifugal blower (AMCA Type A or B explosion-proof rating if handling volatile solvents). Face Velocity: Maintain \(80\text{ to }100\text{ feet per minute (fpm)}\) at standard working sash height. Air Volume Flux: Approximately \(250\text{ to }350\text{ cubic feet per minute (CFM)}\) depending on the exact hood width and sash opening profile. ☐ Yes ☐ No
23 Warranty Full warranty of minimum 36 months or 100,000 km, whichever comes first Locally authorized service agent in Malawi
2. Delivery requirements - Comparative Data Table
UNOPS Requirements Is your Bid compliant? Yes/No Insert details of your acceptance of the stated requirement (Bidder to complete)
Delivery time Delivery within 90 to 150 calendar days. Bidders shall confirm their ability to meet this maximum delivery period and should provide a realistic and firm delivery timeline, taking into account all relevant activities, including manufacturing /procurement, export permits and licences, shipping, customs clearance, and delivery to the final destination. The proposed delivery timeline shall be realistic, achievable and consistent with the complexity and specific requirements of the procurement. Bidders are encouraged to propose an earlier delivery period where feasible; however, delivery beyond the maximum 150-calendar-day period will not be acceptable unless expressly approved by UNOPS in accordance with the applicable contractual provisions. Following dispatch/shipment of the Vehicles, the Contractor shall provide UNOPS with a clear shipment and delivery plan, including the expected date of arrival, shipping documentation, tracking information where applicable, and any other information necessary to monitor progress through to final delivery. ☐ Yes ☐ No
Inspection Testing and acceptance All motor vehicles shall be delivered in a fully operational, roadworthy and ready-to-use condition and shall comply with all specifications and requirements set out in the Contract. Prior to formal acceptance by UNOPS, the vehicles shall be subject to inspection and functional testing to verify conformity with the required specifications, including the vehicle's condition, accessories, safety features, equipment, documentation and other applicable requirements. UNOPS shall formally accept the vehicles only upon satisfactory completion of the inspection and functional testing and confirmation that all contractual requirements have been met. ☐ Yes ☐ No
Warranty Bidders must ensure that items are delivered in a new and undamaged condition, utilizing robust packaging to prevent defects during transit. Any goods arriving unpackaged or unassembled will not be accepted. The supplier shall provide a minimum warranty period as indicated in the minimum technical requirements for each item. ☐ Yes ☐ No
Delivery place and Incoterms rules The Bidder shall accept the conditions for on-site delivery in Malawi under Incoterms® 2020 DAP – Lilongwe, Malawi. The awarded Contractor shall submit a pro-forma invoice to UNOPS promptly upon issuance of the Purchase Order/Contract, as applicable. Upon dispatch of the vehicles, the Contractor shall provide UNOPS with copies of all relevant shipping and transportation documents within two (2) calendar days of dispatch, including tracking information where applicable, to facilitate timely monitoring of the shipment and customs clearance process. UNOPS and/or the consignee shall provide the selected Contractor with the applicable duty and tax exemption documentation, where relevant, to facilitate customs clearance in accordance with applicable procedures. For purposes of customs clearance and processing of applicable tax and duty exemptions, the Contractor shall provide all required shipping and commercial documentation, including, but not limited to: i. Air Waybill (AWB), Bill of Lading, or other applicable transport document; ii. Certificate of Origin; iii. Packing and Weight List; iv. Commercial Invoice; v. Planned Port of Entry; vi. Vehicle identification details, including chassis/VIN and engine numbers, where applicable; vii. Vehicle specifications and model details; and viii. Any other documentation required by the relevant Malawi customs, tax, registration or other competent authorities. The Contractor shall be responsible for ensuring that all documentation provided is accurate, complete and consistent with the vehicles being supplied, and shall promptly address any documentation deficiencies that may delay customs clearance or final delivery. Delivery shall be deemed complete only upon delivery of the vehicles to the designated UNOPS location in Lilongwe, Malawi, in accordance with the applicable DAP delivery terms and following satisfactory inspection and ☐ Yes ☐ No
Consignee details Will be introduced along with the Contract ☐ Yes ☐ No
Delivery details Will be introduced along with the Contract ☐ Yes ☐ No
UNOPS Right to vary requirements At the time the Contract is awarded, UNOPS reserves the right to vary the quantity of the goods and associated services specified above, provided this does not exceed +/-20%, without any change in the unit prices or other terms and conditions of the ITB. NA NA
3. Related services requirements
Service Is your Bid compliant? Yes/No Insert details of your acceptance of the stated requirement (Bidder to complete)
Warranty and Local After Sales Representation Vehicle Warranty at least 3 years and or up to 100,000 kilometers, whichever occurs first. ☐ Yes ☐ No
Vehicle Maintenance Services The Bidder should have a presence in Malawi capable of servicing and repairing the vehicles as well as keep stock of spare parts for the vehicle offered. Bidder to provide the following details (servicing location and contact) : Name, Physical address, P.O. Box number, telephone number, email address, and website address A list of routine maintenance packages to be provided in Annex 2 _ Routine Maintenance Packages. ☐ Yes ☐ No
Manuals Submission of User and Technical Manuals for the Vehicles - in English ☐ Yes ☐ No
4. Spare parts and fast moving consumables
Bidder shall provide a list of fast moving consumables and frequently changed parts line with Annex 1 _ Consumables List
5. Quantity Discounts
6. Ex-factory vehicles
All vehicles delivered must be brand new, straight from the production line (ex-factory). For ex-stock deliveries, the vehicle's age must not exceed 12 months, calculated from the date of manufacture up to the date of delivery.
ANY DEVIATION MUST BE LISTED BELOW:
I, the undersigned, certify that I am duly authorized by [insert full name of bidder] to sign this bid and bind [insert full name of bidder] should UNOPS accept this bid:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ITB_2026_64755 - Annex 1 - Consumables List .xlsx
Bidding document • 0.04 MB
ITB_2026_64755 - Annex 2 - Routine Maintenance Packages - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.xlsx
Bidding document • 0.02 MB
ITB_2026_64755 - Sample Diagrams - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.pdf
Bidding document • 1.31 MB
ITB_2026_64755 - Section I - Instructions to Bidders -Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.pdf
Bidding document • 0.28 MB
ITB_2026_64755 - Section III - Returnable Bidding Form C - Price Schedule Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.xlsx
Bidding document • 0.03 MB
ITB_2026_64755 - Section III - Returnable Bidding Form D_ Technical Bid Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.xlsx
Bidding document • 0.06 MB
ITB_2026_64755 - Section III - Returnable Bidding Forms A; B; E; F; G; H - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.docx
Bidding document • 1.55 MB
Amendment 2 - ITB_2026_64755 - Section II - Schedule of Requirements - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.xlsx - 4 x Mobile Laboratories...pdf
Bidding document • 0.08 MB
Amendment 2 - Clarifications - ITB_2026_64755 - Supply and Delivery Of 4 X Mobile Laboratories to Lilongwe.docx.pdf
Bidding document • 0.27 MB
Amendment 2 - ITB_2026_64755 - Section III - Returnable Bidding Form D_ Technical Bid Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.xlsx
Bidding document • 0.06 MB
Amendment 2 - ITB_2026_64755 - Section II - Schedule of Requirements - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.xlsx - 4 x Mobile Laboratories...pdf
Bidding document • 0.08 MB
Amendment 2 - Clarifications - ITB_2026_64755 - Supply and Delivery Of 4 X Mobile Laboratories to Lilongwe.docx.pdf
Bidding document • 0.27 MB
Amendment 2 - ITB_2026_64755 - Section III - Returnable Bidding Form D_ Technical Bid Form - Supply and Delivery of 4 x Mobile Laboratories to Lilongwe - Malawi.xlsx
Bidding document • 0.06 MB
Notice on UNGM.html
Notice page • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .