Government Tenders Published on 23 January 2025

Kendriya Vidyalaya Sangathan

Indian Navy

Fluid Correction Pen (V2) (Q4), Highlighter Pen (Q4), Eraser (Q4), Glass Cleaner, Liquid (V2) as per IS 8540 (Q4), Sweeping Broom (V3) (Q4), Dishwashing Products (V2) as per IS 6047 (Q4), Binder Clips (V2) (Q3), Transparent Tape (V2) (Q4), pin cushions (Q4)

Yantra India Limited

Northern Railway

XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5846047 Dated : 23-01-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 25310 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 32 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : SrDFM UMB DRM Office, Northern Railway, Ambala Cantt (Rakesh Kumar) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 2/8 1. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023. OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over, Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. 4. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or similar Category Products for 20% of bid quantity, in at least one of the last three Financial years before the bid opening date to any Central/State Govt Organization/PSU. Copies of relevant contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to primary product having highest bid value should meet this criterion. XLPE Cable For Working Voltages Up To And Including 1.1 KV As Per IS 7098 (Part 1) ( 1300 meter ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) 3/8 STANDARDS Conformity of the specification for XLPE cable as per IS:7098 (Part 1): 1988 latest Cables suitable for use in mines No Cables suitable for use in low temperature applications No GENERIC Classification of cables for improved fire performace category 01, C1 - FR, C2 - FR-LSH Nominal Area of Conductor (in Sq mm) 240 Number of core (in Nos) 4 CONSTRUCTION Material of conductor Aluminium Construction of the conductor Stranded and shaped Type of inner sheath Thermoplastic ARMOURING Type of cable Armoured cable Material of armouring Galvanized steel formed wire Type of armouring Single strip Number of armouring wire strip for each size of cable (in Nos) - Must declare (hint: for Unarmoured cables select '0') 28, 29, 30, 31, 32, 33, 34, 35 MARKING ON CABLE Type of sequential marking on cable Screen printing on cable CERTIFICATION Availability of Optional Test Reports Not applicable Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - XLPE Cable For Working Voltages Up To And Including 1.1 KV As Per IS 7098 (Part 1) ( 1300 meter ) Specification Parameter Name Bid Requirement (Allowed Values) Number of armouring Minumum 28 Nos. * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity 4/8 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Jaiprakash Meena 151001, SSE Power Bathinda Punjab-151001 100 60 2 Harsh Vardhan 247001, SR SECTION ENGINEER POWER, SAHARANPUR, UTTAR PRADESH-247001 1200 60 Buyer Added Bid Specific Terms and Conditions 1 . Scope of Supply Scope of supply (Bid price to include all cost components) : Only supply of Goods 2 . Generic Manufacturer Authorization: Wherever Authorised Distributors/service providers are submitting the bid, Authorisation Form/Certificate with OEM/Original Service Provider details such as name, designation, address, e-mail Id and Phone No. required to be furnished along with the bid 3 . Certificates Bidder's offer is liable to be rejected if they don't upload any of the certificates/documents sought in the Bid document, ATC and Corrigendum if any. 4 . Certificates The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test certificate, approval certificates and other certificates as prescribed in the Product Specification given in the bid document. 5 . Forms of EMD and PBG Bidders can also submit the EMD with Account Payee Demand Draft in favour of Sr.DFM/UMB payable at DRM Office, Northern Railway, Ambala . Bidder has to upload scanned copy/proof of the DD along with bid and has to ensure delivery of hardcopy to the Buyer within 5 days of Bid End date/Bid Opening date. 6 . Forms of EMD and PBG Bidders can also submit the EMD with Fixed Deposit Receipt made out or pledged in the name of A/C Sr.DFM/UMB . The bank should certify on it that the deposit can be withdrawn only on the demand or with the sanction of the pledgee. For release of EMD, the FDR will be released in the favour of the bidder by the Buyer after making endorsement on the back of the FDR duly signed and stamped along with covering letter. Bidder has to upload scanned copy/proof of the FDR along with bid and has to ensure delivery of hardcopy to the Buyer within 5 days of Bid End date/Bid Opening date 7 . Forms of EMD and PBG 5/8 Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also (besides PBG which is allowed as per GeM GTC). DD should be made in favour of Sr.DFM/UMB payable at DRM Office, Northern Railway, Ambala . After award of contract, Successful Bidder can upload scanned copy of the DD in place of PBG and has to ensure delivery of hard copy to the original DD to the Buyer within 15 days of award of contract. 8 . Forms of EMD and PBG Successful Bidder can submit the Performance Security in the form of Fixed Deposit Receipt also (besides PBG which is allowed as per GeM GTC). FDR should be made out or pledged in the name of Sr.DFM/UMB A/C (Name of the Seller). The bank should certify on it that the deposit can be withdrawn only on the demand or with the sanction of the pledgee. For release of Security Deposit, the FDR will be released in favour of bidder by the Buyer after making endorsement on the back of the FDR duly signed and stamped along with covering letter. Successful Bidder has to upload scanned copy of the FDR document in place of PBG and has to ensure delivery of hard copy of Original FDR to the Buyer within 15 days of award of contract. 9 . Inspection Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following Inspection Agency would be conducting inspection of stores before acceptance: Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been selected in ATC): None Post Receipt Inspection at consignee site before acceptance of stores: Inspection by Consignee on manufacturer's WTC & GC 10 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses 1. Beneficiary IFSC Code for bank guarantee: SBIN0000607 2. If EMD/Performance security is submitted in the form of Bank Guarantee, The Bank Guarantee should be duly attested by notary public. 3. In case of any extension of contract obligation period, the seller shall be liable to suitably extend the vali dity of the Performance Security. 4. Performance Security shall remain valid for 2 months beyond the date of completion of all contractual o bligations including warrantee obligations. 5.

East Central Railway

Irrigation Department Punjab

Central Board Of Excise And Customs (cbec)

Cleaning, Sanitation and Disinfection Service - Outcome Based - Office/Commercial/Institutions/Residential; General Cleaning (Sweeping, Mopping, dusting); Indoor

Power Grid Corporation Of India Limited

Manpower Outsourcing Services - Minimum wage - Skilled; High School; Others, Manpower Outsourcing Services - Minimum wage - Semi-skilled; High School; Others, Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

E-municipalities - Eservices To Citizens And Employees Of

National Institute Of Pharmaceutical Education And

Bharat Heavy Electricals Limited (bhel)

Damodar Valley Corporation

SCREEN PLATE LARGE OPENING (INTERMEDIATE), DRG NO- 2-367-A-00, SCREEN PLATE SMALL OPENING (INTERMEDIATE), DRG NO-2-367-A-028

Directorate Of Health Services Kashmir

Power Grid Corporation Of India Limited

Kendriya Vidyalaya Sangathan

Manpower Outsourcing Services - Minimum wage - Semi- skilled; Secondary School; Others, Manpower Outsourcing Services - Minimum wage - Unskilled; Secondary School; Others, Manpower Outsourcing Services - Minimum wage - Semi-skilled; Secondary School; Admin

Indian Army

Bharat Heavy Electricals Limited (bhel)

Rourkela Steel Plant

ITEM 10 50910009001591 COIL, SHUNT F/DCEM BRAKE, 600MM, 220VDC, ITEM 20 50910009001364 BRAKE COIL, 220VDC F/DC BRAKE, DIA200MM, ITEM 30 50910009001579 COIL, SHUNT F/DCEM BRAKE, 250MM, 230VDC

Cpwd

Transparent Tape (V2) (Q4), stamp pads (Q4), Dak Pad (V2) (Q4), Twine Thread (Q3), Correspondence Envelopes (V2) (Q4), Stamp - Pad Ink as per IS 393 (Q4), Register (V2) (Q4), conference folder (Q4), self adhesive paper note (Q4)

Food Corporation Of India (fci)

AMC/CMC of Fire Extinguishers - Storage; Carbon Dioxide Fire Extinguisher, AMC/CMC of Fire Extinguishers - Storage; Dry Powder Fire Extinguisher

Southern Railway

Office Chair (V3) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5856638 Dated : 23-01-2025 Bid Document 1/7 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Bharat Dynamics Limited

Municipal Corporation Of Greater Mumbai (mcgm)

Customized AMC/CMC for Pre-owned Products - ANTI A MONOCLONAL; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - ANTI B MONOCLONAL; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - ANTI D MONOCLONAL; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - BLOOD UREA NITROGEN REAGENT KIT; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - CHEMICAL STRIPS FOR URINE SUGAR ALB; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - CREATININEJAFFES KINETIC REAGENT KIT; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - DIRECT BILIRUBIN DIAZO REAGENT KIT; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - RPR VDRL ANTIGEN KIT RPR CARD TEST; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - SGOTAST U mV KINETIC REAGENT KIT; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - SGPTALT UV KINETIC REAGENT KIT; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre- owned Products - Rapid HBs AG; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Rapid HCV; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Glucose Reagent GODPOD; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Total Bilirubin Kit Method; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - HB strips; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - BLOOD GLUCOSE TEST STRIPS; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Autodil plus solution; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Autolyse solution; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Cleaning B Solution; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Autoclean Solution; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - DENGUE Kit NS1; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre- owned Products - Distilled water; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Uric Acid Solution; --; Annual Maintenance Contract (AMC); Not Applicable; No, Customized AMC/CMC for Pre-owned Products - Chloesterol kit; --; Annual Maintenance Contract (AMC); Not Applicable; No

Urban Development Department Uttar Pradesh

Kendriya Vidyalaya Sangathan

Professional Painting Service - Walls; Interior Walls, Exterior Walls; NA

Southern Railway

Advanced Weapons And Equipment India Limited

Rourkela Steel Plant

ITEM 10 50310401150427 ACB, 1600A, 3P, 50 KA, FIXED, ITEM 20 50310409002411 TRIPPING MECHANISM OF ACB, MM: ETU37WT

Transport Department Puducherry

Split Air Conditioner Including Green AC, Wall Mount Type (V2) (Q2)

Durgapur Steel Plant

COUPLING GEARED GC 4, COUPLING GEARED GC 9, COUPLING GEARED GCA 290, COUPLING GEARED GC7, COUPLING GEARED GCA 380

Ntpc Sail Power Company Ltd

Armoured Vehicles Nigam Limited

Bureau Of Indian Standards (bis)

Hindustan Petroleum Corporation Ltd

Urban Development Department Uttar Pradesh

Navodaya Vidyalaya Samiti

E-nagar Palika Government Of Madhya Pradesh

Ntpc Limited

Central Board Of Direct Taxes (cbdt)

Manpower Outsourcing Services - Minimum wage - Skilled; Graduate; Admin, Manpower Outsourcing Services - Minimum wage - Skilled; High School; Others, Manpower Outsourcing Services - Minimum wage - Unskilled; High School; Others

Balmer Lawrie And Company Limited

Nuclear Power Corporation Of India Limited

National Film Development Corporation Limited

Directorate Of Information Technology Government Of

Ntpc Limited

Central Board Of Excise And Customs (cbec)

Monthly Basis Cab & Taxi Hiring Services - Premium Sedan; 2500 km x 320 hours; Local 24*7, Monthly Basis Cab & Taxi Hiring Services - Premium Sedan; 2000 km x 320 hours; Local 24*7, Monthly Basis Cab & Taxi Hiring Services - Hatchback; 2000 km x 320 hours; Local 24*7

Food Corporation Of India (fci)

Handling, Transport and Other Mining Services - Percentage quote based - Handling Service, MLC at WPCs in Bijnor District

Health And Family Welfare Department Karnataka

Bharat Heavy Electricals Limited (bhel)

BRASS HEX. HD. LOCK NUT M 16 E. T, BRASS HEX. HD. LOCK NUT M 20 E. T

Comptroller And Auditor General (cag) Of India

E-municipalities - Eservices To Citizens And Employees Of

Submersible Pump Set Single Phase as per IS 8034 (Q3), Submersible Pump Starters (Motor starter controls) (Q3)