Government Tenders Published on 1 March 2025

Nlc India Limited

All India Institute Of Medical Sciences (aiims)

Gujarat Medical Services Corporation Limited (gmscl)

Nuclear Power Corporation Of India Limited

Mahanadi Coalfields Limited

Central Health Service Ministry Of Health And Family

Border Security Force (bsf)

Central Health Service Ministry Of Health And Family

Security Printing And Minting Corporation Of India Limited

SPME001811 Epoxy Paint - Gray Colour, SPME001812 Epoxy Primer - Red Oxide, SPME002153 Paint -Synthetic Enamel Lemon Yellow, CMZZ004927 Brilant White Paint, SPME001440 Paint -Synthetic Enamel Black, SPME003086 Paint -Synthetic Enamel Smoke Grey, SPME003153 Turpentine Oil, SPME002421 Painting Brush Size -2 inch, SPME004355 Painting Brush Size -3 inch

Indian Navy

Indian Navy

Urban Development And Town And Country Planning

Basic Education Department Uttar Pradesh

Damodar Valley Corporation

All India Institute Of Medical Sciences (aiims)

Soft Silicon Flexible Adhesive Four layered Dressing Size 2cm x 45cm, Soft Silicon Flexible Adhesive Four layered Dressing Size 20cm x 30cm, Soft Silicon Flexible Adhesive Four layered Dressing with activated carbon and silver Size 7.5cm x7.5cm, Soft Silicon Flexible Adhesive Four layered Dressing with activated carbon and silver Size 12.5cm x12.5cm, Soft Silicon Flexible Adhesive Four layered Dressing with activated carbon and silver Size 17.5cm x17.5cm, Soft Silicon Flexible Adhesive Four layered Dressing with activated carbon and silver Size 10cm x30cm, Soft Silicon Flexible Adhesive Four layered Dressing with activated carbon and silver Size 10 x25cm, Soft Silicon Flexible Adhesive Four layered Dressing with activated carbon and Silver Size 23cm x 23cm

Rourkela Steel Plant

QUARTZITE LUMP, Physical Specification & Tolerance+ 10 mm to 40 mm

Research & Development Centre For Iron & Steel

Food Corporation Of India (fci)

Ntpc Limited

Hqids

Surat District Panchayat

Indian Army

Water Rinse Tank 45cm x 75cm x 120cm, Water Rinse Tank 120cm x 90cm x 90cm

Goa Shipyard Limited

1555011012, 1556021098, 1556801123, 1556801124, 1556801125, 1556801126, 1556801127, 1556801128, 1556811053, 1556811056, 1556851137, 93595240501, 93595240502, 93595245800

Bharat Heavy Electricals Limited (bhel)

Collection & Disposal Waste Management Service - Collection, Lifting, Transportation, Unloading, Segregation of garbage, Ways of disposal; Dry Waste

Indian Army

Spares and Repairs of Genr Set 7.5 KVA D8.1612 92 1200522, Spares and Repairs of Genr Set 30 KVA 04 2002 0400241, Spares and Repairs of Genr Set 30 KVA 04 2121 1120051, Spares and Repairs of Genr Set 30 KVA 3H.8408 2220027, Spares and Repairs of Genr Set 30 KVA 3H.8408 2220025, Spares and Repairs of Genr Set 30 KVA 3H.8403 1420085, Spares and Repairs of Genr Set 30 KVA 04 2121 1120049, Spares and Repairs of Genr Set 30 KVA 03 8803 2020017, Spares and Repairs of Genr Set 30 KVA 03 8803 1720070, Spares and Repairs of Genr Set 30 KVA 03 8803 2020016, Spares and Repairs of Genr Set 15 KVA 02 8302 2020005, Spares and Repairs of Genr Set 15 KVA 02 8302 1720185, Spares and Repairs of 4 HP Water Pump N11.1107 2100319, Spares and Repairs of Genr Set 15 KVA 02.2145 1223170, Supply of Bty 12 V 88 AH, Supply of Bty 12 V 100 AH, Supply of Bty 12 V 150 AH, Spares and Repairs of Genr Set 30 KVA 2145 1320173, Spares and Repairs of Genr Set 5 KVA 5116300256, Spares and Repairs of Genr Set 25 KVA WSS 038906 1720414, Spares and Repairs of Genr Set 15 KVA 02 8301 1621734, Spares and Repairs of Genr Set 3 KVA CC3 1001 1500374, Spares and Repairs of Genr Set 30 KVA 03 8803 1720060, Spares and Repairs of Genr Set 30 KVA 04 2121 1320003, Spares and Repairs of Genr Set 30 KVA 3H.8408 2220008, Spares and Repairs of Genr Set 30 KVA 348403 1622023, Spares and Repairs of Genr Set 15 KVA 02.2145 1320623, Spares and Repairs of Genr Set 2.5 KVA 2022 2200037, Spares and Repairs of Genr Set 10 KVA D8.8301 1800013, Spares and Repairs of Genr Set 30 KVA 04 2121 1120177, Spares and Repairs of Genr Set 63 KVA 06 2401 0400003, Spares and Repairs of Genr Set 30 KVA N3K21MT13511, Spares and Repairs of Genr Set 30 KVA 03 8803 1720071, Spares and Repairs of Genr Set 10 KVA D8 8309 2300935, Spares and Repairs of Genr Set 30 KVA 03 8803 1720074, Spares and Repairs of 60 HP Diesel Eng and Pump 4H 2280 16 1420153, Spares and Repairs of 65 HP Diesel Eng and Pump 06 1003 10 1920010, Spares and Repairs of 60 HP Diesel Eng and Pump 4H 2260 1000019, Spares and Repairs of Genr Set 5 KVA CC1 1010 1703104, Spares and Repairs of Genr Set 30 KVA 04 2002 0400145, Spares and Repairs of Genr Set 30 KVA 04 2145 1320168, Spares and Repairs of Genr Set 15 KVA 02 8302 1720181, Spares and Repairs of Genr Set 15 KVA 04 2145 1420161, Spares and Repairs of Genr Set 30 KVA 03 8801 1620027, Spares and Repairs of Genr Set 5 KVA D3 8301 2200007, Supply of Bty 12 V 130 AH

Hindustan Aeronautics Limited (hal)

Uttar Pradesh State Public Service Commission

Cleaning Duster (V3) (Q3), Tissue Papers (V2) (Q4), Disposable Paper Cup (Q3)

Uttar Pradesh State Public Service Commission

Uttar Pradesh State Public Service Commission

Rashtriya Chemicals And Fertilizers Limited (rcf)

Polyproplyne multifilament twine (s/z direction) knotless yarn, PPMF THREAD

Hindustan Aeronautics Limited (hal)

Mishra Dhatu Nigam Limited (midhani)

M S ERW Pipe Class– C as per IS-1239 Size: 100 mm NB, M S ERW Pipe Class– C as per IS-1239 Size: 80 mm NB, G I Pipe, Ends: Plain Ends/Threaded Ends, Class– C

Bharat Heavy Electricals Limited (bhel)

Oxygen Dosing System for MEL SINGRAULI of SUPPLY PART . Break-up of prices is to be furnished as per Annexure I, Oxygen Dosing System for MEL SINGRAULI of Mandatory spares. Price break up of mandatory spares is to be furnished as per Annexure II., Oxygen Dosing System for Adani RAIPUR of SUPPLY PART . Break-up of prices is to be furnished as per Annexure III, Oxygen Dosing System for Adani RAIPUR of Mandatory spares. Price break up of mandatory spares is to be furnished as per Annexure IV., Oxygen Dosing System for Adani Raigarh of SUPPLY PART. Break-up of prices is to be furnished as per Annexure V, Oxygen Dosing System for Adani Raigarh of Mandatory spares . Price break up of mandatory spares is to be furnished as per Annexure VI, Oxygen Dosing System for Mirzapur of SUPPLY PART . Break-up of prices is to be furnished as per Annexure VII, Oxygen Dosing System for Mirzapur of Mandatory spares. Price break up of mandatory spares is to be furnished as per Annexure VIII., Oxygen Dosing System for NTPC Talcher of SUPPLY PART . Break-up of prices is to be furnished as per Annexure IX, Oxygen Dosing System for NTPC Talcher of Mandatory spares Price break up of mandatory spares is to be furnished as per Annexure- X.

Urban Development And Town And Country Planning

Indian Army

Workstation (Q2), High End Desktop Computer (Q2), Online UPS (V2) (Q2), Visual Presenters (Q2), Cable network tester (Q3), CAT 6 Information outlet (Q3)

Goa Shipyard Limited

Nuclear Power Corporation Of India Limited

Rashtriya Chemicals And Fertilizers Limited (rcf)

Morpholine (V3) for Bulk Supply as per IS 12084 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number ( ) : GEM/2025/B/6010921 Dated : 01-03-2025 Bid Document 1/11 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank ICICI EMD Amount 150000 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 14 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Chief Finance Manager Finance Department, Rashtriya Chemicals and Fertilizers Limited (RCF), Thal Unit Alibag 402208 (Chief Finance Manager) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 2/11 1. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023. OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over, Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. 4. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However, H-1 will also be allowed to participate in RA in following cases: i . If number of technically qualified bidders are only 2 or 3. ii . If Buyer has chosen to split the bid amongst N sellers, and H1 bid is coming within N. iii . In case Primary product of only one OEM is left in contention for participation in RA on elimination of H-1. iv . If L-1 is non-MSE and H-1 is eligible MSE and H-1 price is coming within price band of 15% of Non-MSE L-1 v . If L-1 is non-MII and H-1 is eligible MII and H-1 price is coming within price band of 20% of Non-MII L-1 Morpholine (V3) For Bulk Supply As Per IS 12084 ( 36 metric tonne ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) 3/11 Specification Specification Name Bid Requirement (Allowed Values) Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Sushil Kumar 402208, STORES, RCF Ltd Thal, Alibag, District Raigad 36 365 Buyer Added Bid Specific Terms and Conditions 1 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses Tender AU-84261 for supply of Morpholine (36000 Kg or 36 MT) EARNEST MONEY DEPOSIT (EMD) for Rs. 1, 50, 000/- is to be deposited as per following instructions, E MD other than ONLINE deposit shall not be considered: ONLINE DEPOSIT : EMD to be deposited online in Rashtriya Chemicals and fertilizers Ltd (RCF’s) account through payment gateway available on our website at: www.rcfltd.com under ‘ Portals ’ à ‘ EMD Payment ’ (“Click here” for EMD payment). Submit the acknowledgement/receipt of online EMD Payment along with your offer . If exempted from submission of EMD, then upload a valid certificate issued by ‘National Small Scale Industries Corporation (NSIC)/MSME certificate/Udyam registered certificate. Pre-Qualification Criteria: A. TECHNICAL CRITERIA: a. For Manufacturer only: Bidder will submit self- attested PO copies and/or invoice c opies as evidence of manufacture and supply of 18, 000 Kg of Morpholine, manufactured and supplied during any one of the last 3 years . b. For Non-Manufacturers: PO copy of Morpholine supplied during last Seven years f rom the date of tender satisfying minimum one criteria as follows: i. Single PO copy of minimum quantity 28, 800 Kg. ii. Two PO Copies of minimum quantity 18, 000 each . 4/11 iii. Three PO Copies of minimum quantity 14, 400 Kg each . c. Relaxation in Experience criteria for eligible MSEs/STARTUPS 1. For MSEs- Relaxation of 25% in prior experience shall be provided to the qual ifying MSEs . 2. For Startups – No Prequalification criteria except for criteria defined by Gover nment of India for definition as Start Up like certificate from DIPP, Maximum years from incorporation and turnover criteria. Vendor shall be start up for it em under procurement and maximum 10% additional qty. to be awarded to t hem . For Details kindly refer Annexure V of buyer added ATC. B. FINANCIAL CRITERIA: i. CA certified Turnover during last three financial years 2020-21, 2021-22 & 2022 -23 2020-21, 2021-22, 2022-23, 2023-24 (Required minimum Avg . turnover of Rs. 53.65 lakh) . The Turnover should be issued by practicing CA with Membe rship Number, seal and signed with UDIN In case the date of constitution/incorporation of the bidder is less than 3 years old, the average turnover in respect of the completed financial years after the date of co nstitution shall be taken into account. In this case, the financial turnover during last financial year/the average financial turnover during preceding two financial years s hould be at least Rs. 53.65 lakh. ii. Relaxation in Experience criteria for eligible MSEs/STARTUPS 1. For MSEs- Relaxation of 25% in Annual financial turnover shall be provided to the qualifying MSEs. 2. For Startups – No Prequalification criteria except for criteria defined by Gover nment of India for definition as Start Up like certificate from DIPP, Maximum years from incorporation and turnover criteria. Vendor shall be start up for it em under procurement and maximum 10% additional qty. to be awarded to t hem iii. The net worth of the Bidder firm (manufacturer or principal of authorized represent ative) should not be negative on ‘The Relevant Date’. It means the net worth of th e Bidder should not be negative in the balance sheet of last financial year. AND Net Worth of bidder should have not eroded by more than 30% (thirty percent) in the last three years, ending on ‘The Relevant Date’. It means the net worth of last financial year s hould not be less than 30% compared to the 3rd last financial year. In case the date of constitution/incorporation of the bidder is less than 3 years old, the fol lowing will be applicable: Ø The Net Worth in each of these years should not be negative. Ø Net Worth in respect of the immediate previous financial year should not have eroded more 30 per cent than that of it’s previously audited financ ial statement. In case the Bidder has completed financial statements of only preceding year, the clause of net worth erosion will not be applicable (The financial soundness should be CA Certified or Audited financial statement certified by CA) C. MAKE IN INDIA CLAUSE: As per revision dt 16.09.2021 of ‘Public Procurement polic 5/11 y 2017’, Non-local suppliers cannot participate in tenders having estimates less than R s. 200 crores. Offers of Class-I and Class-II Local suppliers as per Make in India pol icy can only be considered for evaluation and award of contract . D. Integrity Pact duly signed with date and stamped on each page. Upload in relevant pa cket of this tender. Signing the Integrity Pact is a prerequisite for prequalification. Integrity Pact and NIT c onditions will form part of the contract. Security Deposit: The supplier receiving the LoA is required to furnish the required performance security, in the pres cribed form by the specified date; failing this necessary action including forfeiture of EMD will be t aken against the supplier Supplier shall submit the security deposit for 5% of the order value (basic contract value without t axes) within 15 days of the P.O. date in the form of DD or bank guarantee as per R.C.F. format fro m R.C.F. approved banker valid for a period of delivery period plus 60 days for claim period. Or Per formance security may be furnished in the form of Insurance Surety Bond, account payee demand draft, fixed deposit receipt from a commercial bank, bank guarantee issued/confirmed from any of the commercial bank in India, or online payment in an acceptable form. If the supplier/contractor fails to submit the performance security as indicated above, Performance Security will be deducted from running bills The performance security will be forfeited and credited to the procuring entity’s account in the eve nt of a breach of contract by the contractor. It shall be refunded to the contractor without interest, after he duly performs and completes the contract in all respects but not later than 90(ninety) day s of completion of all such obligations including the warranty under the contract. Bank guarantee to be addressed and submitted to: Chief Manager Finance, RCF Thal Unit, Alibag, Raigad 402208 Technical Conditions: 1 MORPHOLINE FOR DOSING RG BOILER DRUM SPECIFICATION: A. Purity: 99% Min. by mass B. Relative density: 1.001 Min. C. Color scale: 15 Max (Pt-Co) D. Residue, on evaporation, mg/l, Max: 1000 E. Ash content, g/100ml, Max: 0.003 F. Iron (as Fe): 5 ppm Max G. Copper (as Cu): 5 ppm Max H. Nickel (as Ni): 5 ppm Max I. Silica (as SiO2): 5 ppm Max J. Chloride (as Cl): 5 ppm Max. 6/11 2

Government Medical College And Hospital

All India Institute Of Medical Sciences (aiims)

Employees State Insurance Corporation (esic)

Urban Development And Housing Department

Security Printing And Minting Corporation Of India Limited

Supply, Installation, Testing & Commissioning of Dock Leveller along with its Accessories

Indian Air Force

Indian Air Force

Hydraulic Hose (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6010502 Dated : 01-03-2025 Bid Document 1/5 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Bharat Heavy Electricals Limited (bhel)

Kendriya Vidyalaya Sangathan

Bharat Heavy Electricals Limited (bhel)

Rashtriya Ispat Nigam Limited

Urban Development And Housing Department