Government Tenders Published on 22 March 2025

Iisco Steel Plant

TD MILL GUIDE HOLDER SHIM for item no. 1, TD MILL RESTBAR SHIM for item no. 2

Employees State Insurance Corporation

Hu CD3 Horizon V450 UCHT1 120Tst, CD45 V500-C RUO, Hu CD5 BV605 UCHT2 100Tst, Hu CD117 BV605 104D2 50Tst, Anti-MPO FITC 5B8 50 Tests RUO-GMP, CD79a PE HM47 50 Tests RUO-GMP, CD34 PerCP-Cy5point5 8G12 50 Tests RUO-GMP, CD19 PE-Cy7 SJ25C1 100 Tests RUO-GMP, Hu CD22 APC HIB22 100Tst, CD7 APC-R700 -M-T701- RUO, CD3 APC-H7 SK7 100 Tests RUO-GMP, CD20 V450 L27 100 Tests RUO-GMP, CD10 APC HI10a 100 Tests RUO-GMP, CD38 APC-H7 -HB7- RUO, Hu CD1a BV605 SK9 50ug, CD8 PerCP-Cy5point5 SK1 50 Tests RUO-GMP, CD2 PE-Cy7 L303point1 100 Tests RUO-GMP, Anti-TdT APC E17-1519 100 Tests RUO-GMP, CD56 APC-R700 NCAM16point2 RUO, Anti-HLA-DR V450 100 Tests RUO-GMP, CD15 FITC MMA 100 Tests RUO-GMP, CD13 PE L138 100 Tests RUO-GMP, CD117 PE-Cy7 104D2 100 Tests RUO-GMP, CD33 APC P67point6 100 Tests RUO-GMP, CD64 APC-R700 MD22 RUO, CD14 APC-H7 MphiP9 100 Tests RUO-GMP, CD41a FITC HIP8 50 Tests RUO-GMP, Hu CD105 PE 266 100Tst, CD123 APC -9F5- RUO, CD71 APC-H7 M-A712 RUO, BD FACS Lysing Solution 10X 100ML IVD, BD FACSFlow Sheath Fluid 20L, BD FACS Clean Solution 5L, BD IntraSure Kit RUO, Hu CD10 BV605 HI10A 100Tst, CD4 V450 -SK3- RUO, Hu CD200 PE MRC OX-104 100Tst, CD79b PerCP-Cy5point5 SN8 RUO, CD43 APC-H7 -1G10- RUO, CD56 PE MY31 100 Tests RUO- GMP, CD16 PE-Cy tm7, CD235a FITC Mouse anti-human, PE Mouse Anti-Human CB1 TCR, TCR-C B1-PE-Cyanine7, PE Mouse Anti-Human CB2 TCR, CD8 FITC SK1 100 Tests RUO- GMP, CD5 PerCP-Cy5point5 L17F12 50 Tests RUO-GMP, TCR gamma-delta-1 PE-Cy7 -11F2- RUO, Hu CD11b-MAC-1 BV605 ICRF44 100Tst, Anti-Lambda FITC 1-155-2 50Tst RUO-GMP, Anti-Kappa PE TB28-2 50 Tests RUO-GMP, Hu CD36 BV605 CB38 100Tst, CD23 FITC EBVCS-5 RUO, BD FC Beads 5-color kit, BD FC Beads 7-color kit

Ntpc Limited

10 M5101936104, 20 M5101936106, 30 M5101936123, 40 M5101936200, 70 M5101936208, 80 M5101936209, 90 M5101936210, 100 M5101936211, 110 M5101936214, 120 M5101936215, 130 M5101936352, 140 M5101936354, 150 M5101936355, 160 M5101936357, 170 M5101936358, 180 M5101936359, 190 M5101936361, 200 M5101936362, 210 M5101936363, 220 M5101936421, 260 M5101936515, 270 M5101936516, 280 M5101936517, 290 M5101936518, 300 M5101936519, 310 M5101936520, 320 M5101936521, 330 M5101936522, 350 M5101936633, 360 M5101936664, 370 M5101936665, 380 M5101936668, 390 M5101936670, 400 M5101936671, 410 M5101936672, 420 M5101936673, 430 M5101936674, 450 M5141906546, 460 M0555200267, 480 M5001936456, 490 M5001936459, 530 M5002916173, 540 M5002916650, 550 M5002916651, 560 M5002916659, 580 M5010906107, 610 M5010906110, 620 M5010906111, 650 M5101946087, 660 M5141907023, 670 M0517811003, 680 M0517830804, 690 M5121016529, 700 M0519820403, 710 M0519820500, 720 M0519830305 Bid Number ( ) : GEM/2025/B/6079142 Dated : 22-03-2025 Bid Document 1/46

Armoured Vehicles Nigam Limited

Tyre SCH Tube+ Flap STLN MK-IV, BS-III VEH PT. NO. B3303801HASE1 (Tyre Size: 355/90-20-18 PR Bullet

Nuclear Power Corporation Of India Limited

Indian Army

Tata Memorial Center – Advanced Center For Treatment,

Bharat Dynamics Limited

high performance power supplies (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination ITC available to buyer Yes Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/6079411 Dated : 22-03-2025 Bid Document 1/8 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 978000 Payment Timelines Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 10000 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 15 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : AGM BHARAT DYNAMICS LIMITED HYDERABAD, Department of Defence Production, Bharat Dynamics Limited, Ministry of Defence (Nenavath Shakru) 2/8 MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Directorate Of Purchase And Stores

E-municipalities - Eservices To Citizens And Employees Of

Advanced Weapons And Equipment India Limited

Nuclear Power Corporation Of India Limited

Indian Army

pump 430 Volt complete with and incl 3 Mtr length required size flexible suction pipe, as per store list attached, Distribution box 8 way SPN, 240 volts copper bus bar and neutral link earthing stud conforming to IS-13032 and IS- 8623 double door type Make-Havells, Legrand, L and T, MCB SPN 240 Volts 32 Amps Make-Havells, L and T, Standard, MCB SP 6 to 32 Amps Make- Havells, L and T, Standard, PVC tape 19mm wide 5 m long Make-Steelgrip, Anchor, Kinjal, Cable PVC insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 Sqmm single core as per store list attached, Cable PVC insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2.5 Sqmm single core as per store list attached, Cable PVC insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 Sqmm single core as per store list attached, PVC casing capping of size 1 inch Medium Grade snow white Make-Presto, Polycab, Finolex, PVC casing capping of size 3 oblique 4 inch Medium Grade snow white Make- Presto, Polycab, Finolex, Modular Switch Piano 5 Amp 230 Volts Flush type one way snow white Make- Anchor, SSK, CONA, LED Tube light fittings 15W 230V box type 4 feets with CRCA body Pre coated white and Prewired for LED tuble complete Make-HAVELLS, BAJAJ, PHILIPS, CROMPTON, LED Mirror lights 1 feet 5 Watts Make-Havelles, Bajaj, Philips, Crompton, Screw full thread 6 x 19 mm ISI Marked, 200 Nos Pkt, PVC switch board snow white size 6 inch x6 inch for sockets and switches Make-Supreme, Polycab, Finolex, PVC switch board snow white size 7 inc x 4 inch for sockets and switches Make- Supreme, Polycab, Finolex, PVC switch board snow white size 8 inch x 10 inch for main switches oblique DB Make- Supreme, Polycab, Finolex, PVC L bend and T junction joint for PVC casing and capping confirming to IS 3419 Part 3 Make-Supreme, Polycab, Finolex, Modular Switch socket combination snow white multipurpose 2 in 1, 15 Amp 230 Volts Make-Anchor, SSK, CONA, Modular Switch socket combination snow white 5 Amp 230 Volts Make- Anchor, SSK, CONA, Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long Make-Jindal, Tata, Kalinga, Service cable PVC insulated aluminium conductor, 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall as per store list attached, Ceiling Rose three terminal snow white Make-Anchor, SSK, CONA, LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts as per store list attached, PVC Flexible wire copper conductor multi stranded 0.0016 oblique76 Make- Havells, Finolex, Plaza, PVC Flexible Conduit pipe 15 mm dia Make-Polycab, Supreme, Finolex, PVC Round oblique Squire Block Make-Polycab, Supreme, Finolex, Exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings Make-Bajaj, Havells, Crompton, Fire extinguisher of one kilogram capacity, dry power type conforming to IS-13849 along with its accessories Make- Cease fire, Omex, Alfa Fire, Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side, CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame., Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe Make-Jindal, Tata, Kalinga, GI wire 4 mm diameter For earthing, Charcoal, Salt normal, Air termination single pointed aluminium rod 12 mm dia and 300 mm long., Testing point terminal block make of Bid Details 3/83 gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw, Aluminium strips 25 x 3.0 mm, Galvanized Iron strip 32 x 6 mm, Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side., Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make-Presto, Polycab, Finolex, Double sleeping Bunk alongwith Rexene sleeved Matress of Make- Kurlon, Sleepwell, Corform, complete all as specified in tech specification., Steel Bed side Locker of size 1000mm X 1520mm X 450mm, comlete all as specified in tech specification, Study chair of size length 56 Cm, Height 82 Cm and Width 56 Cm, Type Lacquered finish with arm, seat and back cushion, velvet upholstery Make-Supreme or equivalent, Study Table of size 4 feet X 2 feet, Wooden top on round tube structure with three drawers on one side., Looking Mirror of selected quality frameless of size 600X450x5mm Make-Prayag, Saint Gobain, Modigaurd, Peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms Make-Ess Ess, Prayag, Johnson Suisse, Water Dispenser of 230 V 500 Watts without refrigerator with normal cold and heating capacity of 5 lts oblique hour with storage compartment and auto shut off facility. Make-VOLTAS, LG, USHA, Protable indoor type High quality Kero Heater metal body ignites type of continues heating duration min 8 hrs and above with capacity 4 ltrs as per store list attached, Individual standalone plastic body smoke alarm with adequate provision for fixing on wall, ceiling, roof The unit to have sensor as per store list attached, Individual standalone plastic body heat alarm with adequate provision for fixing on wall, ceiling, roof. The unit to have sensor capable of detecting as per store list attached, Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames as per store list attached Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold Ambuja/Ultratech/ACC/JK/Dalmiya), Coarse sand free from vegetation, Coarse aggregate 20mm graded, Coarse aggregate 40 mm graded, Coarse aggregate 63-90 mm graded, Stone for RR Masonary less than 6", Mild Steel Bars of size 8mm dia conforming to IS 432 (Part I) 1982 (Make : TATA/SAIL/JSW), Mild Steel Bars of size 10 mm and above dia conforming to IS 432 (Part I) 1982 (Make : TATA/SAIL JSW), Mild Steel Bars of size 12 mm and above dia conforming to IS 432 (Part I) 1982 (Make : TATA/SAIL/JSW), Mild Steel Bars of size 16 mm and above dia conforming to IS 432 (Part I) 1982 (Make : TATA/SAIL/JSW), MS Binding Wire, Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m, Wooden Scantling various sizes, Wooden log for props of size 3.2 Mtr long 100mm dia., APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified., Priming surfaces and applying bitumen as a primer in base of APP membrane, (a) MS RHS of size 80X40X3.2, (b) MS RHS of size 50X25X2.9, (c) MS RHS of size 96X48X3.2, (d) MS Plate of size 8mm thick, (e) MS Plate of size 10mm thick, (f) MS Plate of size 12mm thick, (g) MS angle of size 40X40X6 for cleat, MS Nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm Bid Details 4/83 thick complete all as directed., MS Flat iron 40x5mm thick for wind tie : TATA/SAIL/JSW, Iron welding rod confirming to IS 814-2002 (ISI Marked) 3.15mm Thick : 100 Nos Pkt, Water Proofing compoundconfirming to IS 2645-2003 (Make : Pidilite/Dr.fixit/Fevicol), Quick setting Compound (Make:- Pidilite/Fevicol/Quick Fix), Cement based paint (Snowcem) Make : Berger/Asian/Nerolac, Oil Bound Distemper (Washable Quality) of proprietary brand of (Make : NEROLAC/BERGER/ASIAN), Birla white wall care putty (Water Resistant White Cement). (Make : NEROLAC BERGER/ASIAN), PPGI roofing sheet 10' x 3' long and thickness 0.63 mm with grard film. The PPGI sheet shall have minium coating of 4-5 micron epoxy primer and 18-20 micon polyester top coat. The top of 30-40 micon on the finished surface only for protection. The pre coated GI sheet confirm to IS -14246-1995 Make : Unifix/Jindal Mectec or euinalent brand with IS specification., Pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 Mpa(Make-Uniix/Jindal mectec or Eqv Brand), Synthetic Paint enamelled OG colour confirming to IS 5-2004 (Make : Berger/Asian/Nerolac), Painting Brush 4" (ISI Marked), Nails various size, Self taping steel screw half thread with rawl plug of 1 1/2" size (ISI Marked) (100 Nos/Pkt), Anodised Aluminium door 1000 mm x2100 Double shutter with frame including all fittings and as directed (Make : Jindal/Hindalco) aluminium section weighing 0.55 kg/mtr., Anodised Aluminium window triple track (2 track glass & 1 track wire mesh) with frame of size 1000mm x 1000mm including all fittings and as directed (Make : Jindal/Hindalco) aluminium section weighing 0.55 kg/mtr., Anodised Aluminium Ventilator 1200x600 mm fixed type with glass (4mm thick) thick including all fittings and as directed (Make : Jindal/Hindalco) aluminium section weighing 0.55 kg/mtr., MS anchor bolt, suitable for RCC work, 12mm dia, 300mm long with 2 washer and a nut (Minimum wt of each bolt & nut is 450 gm) complete all as directed., Ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick Make: (Johnson/Kajaria/Orient) 1st quality confroming to IS -156-2006, White Cement confirming to IS 8042/1989 (Make: ACC/Birla White/Ambuja), Curtain Arrangement Drapery and rod made of 25 mm dia and 1600 mm long, pre coated MS pipe with fancy type ends. Suitable fixing arrangement for the curtain rod, shall be made and supplied to hold the curtain rods alongwith fixing arrangement complete. (ISI Marked), Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt (Make:-Birla Gold/Ambuja/Ultratech/ACC/JK/Dalmia or equivalent) Confirming to IS 8112 - (2013), Coarse sand free from vegetation Confirming to IS 650 - 1991 (Reaffirmed 2008), Coarse Aggregate 40mm graded Confirming to IS 383 - 2016, Stone boulder 9" to 12" Confirming to IS 1597 Part- I - 1992 (Reaffirmed 2002), PVC Pipe 75mm dia 3 mtr long Make: Prince/Finolex/Supreme/equivalent Confirming to IS 4985 - 2000 (Reaffirmed 2006), Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112-1989 (Make: Birla Gold/Ambuja/Ultratech/ACC/JK/Dalmia or equivalent., Coarse Sand free from vegetation, Coarse aggregate 20mm graded, Coarse aggregate 40mm graded, Hardcore 63-90 mm graded, Brick Sub Class 'B', Three Phase 1.2 HP monoblock pump 430 Volt complete with and incl 3 Mtr length required size flexible suction pipe, foot valve and connected accessories complete all as specified and directed (incl testing & commissioning), Distribution box Bid Details 5/83

Advanced Weapons And Equipment India Limited

Indian Army

Cement and all other specification as per RFP, Coarse sand free from vegetation and all other specification as per RFP, Coarse aggregate and all other specification as per RFP, Coarse Aggregate and all other specification as per RFP, stone and all other specification as per RFP, Mild steel bar and all other specification as per RFP, Water proofing compound and all other specification as per RFP, Glass Dividing Strips and all other specification as per RFP, M S Binding wire and all other specification as per RFP, Quick setting compound and all other specification as per RFP, Slack Lime and all other specification as per RFP, Cement based paint and all other specification as per RFP, Anti corrosive red oxide and all other specification as per RFP, Synthetic Paint and all other specification as per RFP, Thinner and all other specification as per RFP, MS Pipe med and all other specification as per RFP, J Hook and all other specification as per RFP, Pre painted and all other specification as per RFP, Painting Brush and all other specification as per RFP, Steel door and all other specification as per RFP, Ventilator Steel and all other specification as per RFP, CRYPTON NEW SERIES and all other specification as per RFP, Cable PVC and all other specification as per RFP, Switch socket combination and all other specification as per RFP, Distribution box and all other specification as per RFP, MCB SP and all other specification as per RFP, PVC Flexible Conduit pipe and all other specification as per RFP, PVC tape and all other specification as per RFP, Screw and all other specification as per RFP, PVC switch board and all other specification as per RFP, Switch Piano and all other specification as per RFP, LED Tube light fittings and all other specification as per RFP, Ceiling Rose and all other specification as per RFP, MCB SPN and all other specification as per RFP, PVC casing capping and all other specification as per RFP, PVC L bend and T junction joint and all other specification as per RFP, Service bracket and all other specification as per RFP, Service cable and all other specification as per RFP, PVC Round Squire Block and all other specification as per RFP, Air termination and all other specification as per RFP, Testing point terminal block and all other specification as per RFP, Aluminium strips and all other specification as per RFP, Galvanised Iron strip and all other specification as per RFP, Funnel fitted and all other specification as per RFP, Earthing plate and all other specification as per RFP, CI earth pit cover and all other specification as per RFP, Insulating PVC block and all other specification as per RFP, Charcoal and all other specification as per RFP, Salt normal and all other specification as per RFP

Iocl- Wrpl

Bharat Heavy Electricals Limited (bhel)

Iocl- Erpl

Call Station with IP speaker for Control Rooms for audio conferencing system, Redundant IP based audio confrencing system, Supply of Firewall, Installation testing and Commissioning, CAMC Charges for 1st Year, CAMC Charges for 2nd Year, CAMC Charges for 3rd Year, CAMC Charges for 4th Year, CAMC Charges for 5th Year Bid Number ( ) : GEM/2025/B/6068239 Dated : 22-03-2025 Bid Document 1/37

Visvesvaraya Iron And Steel Plant

East Coast Railway

Monthly Basis Cab & Taxi Hiring Services - MUV; 2200 Kms per month for SSET Control KUR; Outstation 24*7, Monthly Basis Cab & Taxi Hiring Services - MUV; 2200 Kms per month for SSES South KUR; Outstation 24*7, Monthly Basis Cab & Taxi Hiring Services - MUV; 2200 Kms per month for SSES PURI; Outstation 24*7

Cpwd

Wooden single bed, Steel table with storage, Plasic molded chair without arms without coushion, Mattress Rubberized coir, Teak wood 8 seater restaurant table with 8 nos chair, Pillow Cotton, Plywood bed sides table

Damodar Valley Corporation

Design, supply, commissioning, testing of an Effluent Treatment Plant 6KLD at Hospital Maithon DVC

Northern Railway

Indian Army

White Bread, Wheatmeal Bread

Bharat Heavy Electricals Limited (bhel)

Hindustan Petroleum Corporation Ltd

HAND OPERATED MANUAL SIREN, SCBA SET, FIRE PROXIMITY SUIT

Armoured Vehicles Nigam Limited

Northern Railway

Indian Army

carbonated soft drinks, Carbonated Lime based Soft Drink, Fruit Juice

Indian Army

Nuclear Power Corporation Of India Limited

Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/6005138 Dated : 22-03-2025 Bid Document 1/16 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 28840 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 3 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Site Director, NPCIL, RR SITE Rajasthan, Department of Atomic Energy, NUCLEAR POWER CORPORATION OF INDIA LIMITED, CONTRACT AND MATERIAL MANAGEMENT WING, RAWATBHATA RAJASTHAN SITE, PO: ANUSHAKTI-PIN-323303 (Site Director) Reserved for Make In India products Reserved for Make In India products Yes MSE Purchase Preference MSE Purchase Preference Yes 2/16 1. Bid reserved for Make In India products: : Procurement under this bid is reserved for purchase from Class 1 local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. However, eligible micro and small enterprises will be allowed to participate. The minimum local content to qualify as a class 1 local supplier is denoted in the bid document. All bidders must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which the bid is liable to be rejected. In case the bid value is more than Rs 10 Crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020 . In case Buyer has selected Purchase preference to Micro and Small Enterprises clause in the bid, the same will get precedence over this clause. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over, Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. Plain Copier Paper (V3) ISI Marked To IS 14490 ( 7000 ream ) (Minimum 50% Local Content required for qualifying as Class 1 Local Supplier) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) STANDARDS Paper Size A4 Grammage (GSM) of the Paper 75 gsm PACKING AND MARKING Packing Ream of 500 Sheet 3/16 Additional Specification Parameters - Plain Copier Paper (V3) ISI Marked To IS 14490 ( 7000 ream ) Specification Parameter Name Bid Requirement (Allowed Values) Colour of copier paper White * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 7000 30 Special terms and conditions-Version:2 effective from 23-12-2024 for category Plain Copier Paper (V3) ISI Marked to IS 14490 1 . Catalogue Image Upload Guidelines Product catalogue Images uploaded should carry the following informations: 1 . Should have original product image. 2 . Should carry the marking information as per IS:14490 such as ISI Mark, BIS License Number (CM/L), Net weight of the Ream, GSM etc. 3 . Should have the ISI Mark label on the wrapping cover ECO-Mark - Eco Mark is applicable as per G.S.R. 85(E) dated 21st February 1991 (Annexure - I) for this category. As such Buyers may also opt for eco mark labelled product while creating Bid. In such cases buyer shall verify Eco mark label at the time of evaluation of BID/receipt of material before issuing CRAC. Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms. 2 . Generic 4/16 Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %. 3 . Generic While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the screenshot of GST portal confirming payment of GST. 4 . Generic 1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of buyer. 2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior written consent of buyer. 3. The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally liable and responsible to buyer together with the assignee/sub-contractor, for and in respect of the due performance of the Contract and the Sellers obligations there under. 5 . Scope of Supply Scope of supply (Bid price to include all cost components) : Only supply of Goods 6 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses (A) Additional Specification Parameters, if any : Additional Specification Parameters as stipulated in the Bid Document must be complied by the Bidder/Seller and supply may be made accordingly otherwise material will be liable for rejection. (B) Clarifications/documents submitted by the bidder : (i) Clarifications/documents submitted during the representation time shall not be considered for evaluation and hence any clarifications/documents asked fro m the bidder may be submitted before evaluation of bid only. (ii) The Representation window is opened 4/5 days from the date of publishing o f bi d for seeking clarification towards technical/commercial in the existing bid, failing which buyer shall not be responsible for giving response under the Bid. (iii) For post contract related clarification/queries bidder can contact buyer at b uyer ID : [email protected] ( contact No. 9413356554 ) (C) Documents related to Payment The seller shall submit Original invoice clearly marked for ‘Bill to’ and ‘Shipped t o’, Annexure-F (copy enclosed), Seller’s Bank details, E-invoice if applicable to s eller based on his turnover, Test certificate (if applicable) etc to the Paying Auth ority directly, immediately after dispatching material to the Consignee. As paym ent is to be released in a time bound manner, non-receipt of these document in time may lead to rejection of supplies.” (D) MSE Benefits Purchase preference will be given to MSEs as defined in Public Procurement Poli 5/16 cy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders Notifications issued by concerned Ministry. Trades are excluded from the purvie w of Public Procurement Policy for Micro and Small Enterprises. Relevant docum entary evidence in this regard shall be uploaded along with the bid. If L-1 is not an MSE and MSE Seller(s) has/have quoted price within L-1+15% of margin of p urchase preference/price band defined in relevant policy, such Seller shall be gi ven opportunity to match L-1 price and contract will be awarded for 25% of total QUANTITY. Benefits of Public Procurement Policy shall be given to all eligible MSEs as stated under Point no.3 of FAQ dt. 25/03/2022, irrespective of p roduct categories and the category they are registered under viz. Manufacturin g or Service. (E) Following documents duly signed and sealed by the authorized rep resentative of the Firm/Company shall invariably be submitted by the bidder(s) along with the bid for evaluation of the offer: 1) Certificate as per attached Annexure-M for compliance of ‘Make in India Orde r’ furnished by Original Equipment Manufacturer (OEM) may only be submitted as per GeM bid condition. (Additional Document No.1) 2) Annexure-‘F’ as per attached format for ‘Declaration Form for GST’. (Additio nal Document No.2) 3) ‘Mandate Form’ at per attached format. (Additional Document No.3). 4) ‘Specifications Compliance Sheet’ to be filled by the bidder, if asked in the te nder. (Additional Document No.4) 5) In case of submission of EMD in the form of ePBG, DD, FDR/TDR other than o nline payment transaction mode i.e. IMPS/NEFT/RTGS, the original documents of EMD should reach at following address within 05 working days of bid opening as per Clause No. 4-xiii-(m) of GeM GTC, failing which the bid will be liable for rejec tion:- Nuclear Power Corporation of India Limited (A Government of India Enterprise) Contracts & Materials Management Wing Ground Floor, Rajasthan Parmanu Vijay Bhawan, Rawatbhata Rajasthan Site, PO Anushakti, Via-Kota, Rajasthan-323303 6/16 (F) Online Payment of EMD and e-PBG : ONLINE PAYMENT OPTION OF EMD (EARNEST MONEY DEPOSIT)/ePBG (PERFOR MANCE BANK GUARANTEE) :- BIDDERS CAN SUBMIT EMD/ePBG THROUGH SBI COLLECT PORTAL BEING OUR P REFERED MODE WHICH HAS FACILITY FOR EASY DEPOSITING AND REFUND OF E MD AND E-PBG. SBI collect facility can be accessed through the following manner :- Option 1 : Go to link https:/www.onlinesbi.sbi/sbicollect/icollecthome.htm?saralI D=-913530096 Option 2 : Visit SBI website -> SB Collect -> Select Category as PSU-> Filter ‘Sta te’ Rajasthan and Search for “ N P C I L 1 AND 2 ” Steps to be followed for making remittance:- · Click on the Payment Category and Select EMD (Earnest Money Deposit)/eP BG (Performance Bank Guarantee) option. · Enter the required details in the given format and review the details to ensur e accuracy and click on the Next button. · Choose from the different modes of payment such as Debit card, Credit Card, internet banking, UPI etc., and make the payment. · Save/download the receipt generated for reference and upload a copy of rece ipt along with the bid in case of EMD. · Save/download the receipt generated for reference and a copy of receipt may be forwarded on Buyer’s e-mail ID in case of ePBG and a copy of the same may also be uploaded on GeM portal against the GeM Contract. (G) Undertaking/Compliance to Clause No. 29 of GeM GTC : Bidder is mandatorily required to submit an Undertaking as per attached Annex ure-D on Company’s Letter He ad along with offer, failing which, their offer will not be evaluated and rejected without asking any further clarification with regar d to the same. (H) Important Instructions to the Sellers : In the event of purchase order, following instructions shall be followed by the Se ller:- 1) Supply is to be made within stipulated delivery period as mentioned in the G eM Contract since Time is the essence of Contract. However, in case of exceptio nal circumstances as mentioned in GeM GTC, request for extension in delivery p eriod may be made by Seller on GeM portal. Simultaneously, an e-mail f or exte nsion in delivery period along with reason for delay in supply may be sent to e- mail ID of Buyer as mentioned in the Contract which will be reviewed by the Co 7/16 mpetent Authority before issuing of the amendment on GeM portal and hence r epeated request on GeM portal for extension of delivery period ma y be avoided by the Seller till acceptance of the buyer since th e same gets auto cancelled by the system. 2) Invoice may be uploaded on GeM portal by the Seller immediately after dispa tch of material otherwise system will not allow the Seller to upload the invoice o n GeM portal after expiry of the delivery period as mentioned in the Contract. 3) Only Buyer GeM e-mail ID may be used by the Seller to send any communica tion with regard to GeM Contract, if required. (I) Right of Recourse under Civil Liability for Nuclear Damages Act 2010 & Rule 2011 thereof : Since requirement is for PHWR, NPCIL is the system designer and technology o wner, being responsible for safety design of such installations in the this tender, NPCIL shall assume the role of Supplier in accordance with the explanation of te rm “Supplier” given in Rule 24 of the CLND Rules, 2011 and in the context of se ction 17(a) and (b) of the CLND Act, 2010. I.0 BANNING OF BUSINESS DEALINGS BY NPCIL/BUYER NPCIL reserves the right to initiate Banning as per NPCIL’s Banning of business dealings as mentioned below and are independent of actions under GeM’s IM (In cident Management) Policy. The words banning, blacklisting, de-registered, debarred, holiday, suspension of business etc., means the same. The words NPCIL, Corporation, Buyer etc., means the same. The words Contractor, Bidder, Seller, Service Provider etc., means the same. I.1 Grounds for Banning The business dealing with the Contractor/Bidder/Seller/Service Provider shall be liable for banning, on account of the reasons attributable to them, which shall in clude, but not limited to the following: I.1.1. Involvement in cartel formation during bidding. I.1.2. Baseless allegations by the bidder on NPCIL/Corporation/Buyer evaluation processes or officials. I.1.3. If any of the owner, proprietor or partner of the Contractor, is convicted by a court of law, during bidding process or currency of the contract, for offences i nvolving corrupt and fraudulent practices including misrepresentation of the fac ts, moral turpitude in relation to its business dealings with NPCIL. I.1.4. Malafide/unlawful acts/malpractices or improper conduct on part of Cont ractor based on the approved findings of the Investigation Agency. I.1.5. If the Contractor misuses the premises or facilities of the NPCIL forcefully o ccupies, tampers or damages the Company’s properties etc. or fails to vacate t 8/16 he properties/land/complex within reasonable time limit as specified or even aft er receiving the notices from the department. I.1.6. Security concerns for the assets of the Corporation and State. I.1.7. Submission of bids that contain false information or falsified documents or the concealment of such information in the bids in order to influence the outco me of eligibility screening or/at any other stage of the public bidding and exec ution. I.1.8. Withdrawal of a bid or refusal to accept an award of contract with the NPC IL without justifiable cause, after being adjudged as the successful bidder. I.1.9. Supply of Counterfeit items Breach of Code of Integrity. I.1.10. Bidder shall not act in contravention of the codes which includes I.1.10.1 Prohibition of a. Making offer, solicitation or acceptance of bribe, reward or gift or any materia l benefit, either directly or indirectly, in exchange for an unfair advantage in the procurement process or to otherwise influence the procurement process. b. Any omission or misrepresentation that may mislead or attempt to mislead s o that financial or other benefit may be obtained or an obligation avoided. c. Any conclusion, bid rigging or anticompetitive behavior that may impair the t ransparency, fairness and the progress of the procurement process. d. Improper use of information provided by the procuring entity to the bidder wi th an intent to gain unfair advantage in the procurement process or for persona l gain. e. Any financial or business transactions between the bidder and any official of t he procuring entity related to tender or execution process of contract; which ca n affect the decision of the procuring entity directly or indirectly. f. Any coercion or any threat to impair or harm, directly or indirectly, any party or its property to influence the procurement process. g. Obstruction of any investigation or auditing of a procurement process. h. Making false declaration or providing false information for participation in ten der process or to secure a contract; I.1.10.2 Disclosure of conflict of interest I.1.10.3 Disclosure by the bidder of any previous transgression made in respect of the provisions of above I.1.10.1 with any entity in any country during the last three years or of being de barred/banned by any other procuring entity. I.2 Show Cause Notice I.2.1 NPCIL will issue Show Cause Notice to the Contractor on noticing/receipt of 9/16 a complaint of any irregularities and/or misconduct and/or unethical practice a s mentioned in clause no. 1.1. I.2.2 Upon receipt of Show cause notice, the Contractor is required to submit th e reply to Show Cause Notice within 30 days of its receipt and no extension shal l be given without justifiable reasons. The Contractor shall also be given an opp ortunity for oral hearing to present the case in person to NPCIL and the date of Oral Hearing will be indicated in the Show Cause Notice. Only the regular emplo yees of Contractor will be permitted to represent the Contractor during the Oral hearing, and no outsider shall be allowed to represent the Contractor on their b ehalf. I.3 Period of Banning The period of banning shall be for a period of not exceeding 2 (two) years and n ot less than 6 (six) months as considered appropriate by NPCIL. I.4 Effect of Banning of Business Dealings by NPCIL In case NPCIL has banned the business dealing with the bidder/contractor, the f ollowing shall be the consequences on issuance of the order of banning of busin ess dealings with the bidder/contractor: I.4.1 No Contract of any kind whatsoever shall be placed to such banned firms including its allied firms after the issue of Banning Order by NPCIL. The Contract or including their allied firms shall not be allowed to participate in any tender en quiry till completion of Banning period. If the Contractor has already participate d in tender process and the price bids are not opened, his techno-commercial bi d will be rejected and price bid will be kept unopened. In cases, where the price bids of Contractor have been opened prior to the order of banning, such bids sh all be rejected. However, incase such banned Contractor is Lowest (L1), next lo west firm shall be considered as L1. Bid Security, if any, submitted by such ban ned Contractors shall be returned to the bidder. I.4.2 Contractors shall not be permitted to participate in any business process in any form or entity i.e., as an Associate/Collaborator/Joint Venture Partner/Conso rtium Partner of the Main Contractor even if the banning order is passed subseq uent to opening of Part-I bids. I.4.3 Contractor shall not be allowed to participate as Sub-Vendor/sub-contracto r in the tenders for contracts for works, service, supplies. I.4.4 Even if, the banned Contractor is an approved Sub-vendor under any Contr act for such equipment/component/service, the Main Contractor shall not be per mitted to place Work order/Purchase order/Service Contract on the banned Con tractor as a sub-vendor after the date of banning even though the name of the p arty has been approved as a sub-vendor prior to the order of banning. I.4.5 The completion certificate issued to the contractor shall make a mention r egarding banning during execution of the contract. I.4.6 Banned bidders shall not be permitted to submit their bid. The bid submitt ed by the banned bidder shall be summarily rejected. 10/16 I.4.7 Contracts concluded before the issue of the banning order shall, not be aff ected by the banning order. I.4.8 Banning shall automatically be extended to all Allied firms of the Contracto r. In case of Joint venture/Consortium is banned all partners will also stand deb arred for the period specified in the Banning Order. The names of all partners s hould be clearly specified in the “Banning order”. I.4.9 Banning in any manner does not impact any other contractual or other leg al rights of NPCIL. I.4.10 Banning under the provisions of Banning of Business Dealings of NPCIL is applicable only for NPCIL. I.5 Definition of Allied Firm : Allied Firm means all concerns which come within the sphere of effective influence of the banned firm. In determining this, the following factors shall be t aken into consideration: a. Whether the management is common; b. Majority interest in the management is held by the partners or directors of ba nned/suspended firm; c. Substantial or majority shares are owned by the banned/suspended firm and by virtue of this it has a controlling voice; d. Directly or indirectly controls, or is controlled by or is under common control with another bidder; e. All successor firms will also be considered allied firms. (J) END USE CETIFICATE/VERIFICATION In case applicable, Bidder shall ensure that items to be imported to India do not have US origin components above the de minims level. End use verification shal l not be agreed by NPCIL in case of imports under any circumstances. Further, t he bidder/contractor shall make attempts to import raw materials/component s, if necessary, without insisting for “End User Certificate”. (K) DELIVERY SCHEDULE Date of delivery of the Stores stipulated in the Contract, shall be the essence of the Contract and delivery of Stores must be completed by the dates specified th erein. Unless otherwise agreed, the Contract shall come into force from the dat e of issue of priced Purchase Order (Effective Date) and accordingly contractual delivery period shall be reckoned from that date for the purpose of fixing Contra ctual Delivery Date (CDD). (L) PRICE BREAK-UP In case of two part tenders, the Bidder shall take special care not to mix up any price details required to be submitted against Part-II (Price bid) with Part-I (Tech 11/16 nical & Commercial bid except price) and vice versa. Any violation of the above shall lead to summarily rejection of bid as being non-responsive. Wherever asked for, the bidder shall be required to submit complete break-up o f “Total Price” as per prescribed “Price Bid Break-up/SOQR” format in GeM Porta l. In such case, the non-submission of the “Price Bid Break-up/SOQR” or submiss ion of irrelevant document or submission of No/Nil value against all items of the “Price Bid Break-up/SOQR” shall lead to rejection of such bids. However, in case No/Nil rate is quoted against some of the item(s), the price of such item(s) shall be deemed to be zero. Addition/deletion/modification of any item in the prescribed “Price Bid Break-up SOQR” format is not acceptable unless authorized by Buyer and accordingly, bi ds with any unauthorized addition/deletion/modification in the prescribed “Price Bid Break-up/SOQR” format shall be summarily rejected. Calculations for Price Bid Evaluation for Single Packet/Part Bids, Part-II (price bi d) evaluation for Two Packet/Part Bids and Contract Order Placement: For Price Bid Evaluation as per price evaluation criteria as well as for award of c ontract, “Total Price” quoted by Bidder in GeM Portal shall only be considered. T he same “Total Price” shall only be considered for other purposes (i.e., negotiati on, price matching in case of MSE/MII purchase preference/

Armoured Vehicles Nigam Limited

CAST FIXED BASE BENCH VICE CONFORMITY TO STANDARD WITH LATEST AMENDMENTS: IS: 2586 (1986), SIZE: 150M, CAST FIXED BENCH VICE CONFORMITY TO STANDARD WITH LATEST AMENDMENTS: IS: 2586 (1986), SIZE: 200MM (+

Electronics Corporation Of India Limited

Indian Air Force

Indian Institute Of Management (iim)

High End Desktop Computer (Q2), Line Interactive UPS with AVR (V2) (Q2)

Mishra Dhatu Nigam Limited (midhani)

Advanced Weapons And Equipment India Limited

Office Of Dg ( Ns & M)

5 Meter Phase Stable Low-loss Flexible Co-axial Cable With Prefixed Connectors, 3 Meter Phase Stable Low-loss Flexible Co-axial Cable With Prefixed Connectors, 2.92 Mm (M) To 3.5mm (F) Co-axial Connector, 2.92 Mm (F) To 3.5mm (F) Co-axial Connector, Type-N (M) To 3.5 Mm (F) Co-axial Connector, Rectangular Waveguide To Co-axial Adaptor, Waveguide Short Plate

Nuclear Power Corporation Of India Limited

National Aluminium Company Limited, Bhubaneswar

Indian Army

Semi integrated Solar LED Street light and all other specification as per RFP, Cement and all other specification as per RFP, Coarse sand free from vegetation and all other specification as per RFP, Coarse aggregate and all other specification as per RFP, All Store as per RFP

Electronics Corporation Of India Limited

SUPPLY OF BROWN PAPER ROLL(FOR PACKING & WRAPPING), 90 GSM, WIDTH: 1 Mtr

Indian Army

Security Printing And Minting Corporation Of India Limited

maplitho paper in reels, 45cms width 70 gsm

Indian Army

Angle iron and all other Specification as per RFP, Cement and all other Specification as per RFP, Coarse sand free from vegetation and all other Specification as per RFP, Coarse aggregate and all other Specification as per RFP, Chain link fencing single dip and all other Specification as per RFP, Galvanished steel barbed wire and all other Specification as per RFP, MS Flat iron and all other Specification as per RFP, MS Nut Bolt and all other Specification as per RFP, Mild steel bar and all other Specification as per RFP, Anti corrosive red oxide and all other Specification as per RFP, Synthetic enamel paint olive green and all other Specification as per RFP, Binding wire and all other Specification as per RFP, Thinner and all other Specification as per RFP, Paints brush and all other Specification as per RFP, Paint brush and all other Specification as per RFP, Medium weight beam and all other Specification as per RFP, Gate size and all other Specification as per RFP, Door and all other Specification as per RFP

Assam Rifles

Hindustan Copper Limited

SS Punched Grid Resistance box For 15HP EOT Crane motor, 2step. Specifications: Type: -MC, HP-15, Vo, SS Punched Grid Resistance box For 15HP EOT Crane motor, 3step. Specifications: Type: -MC, HP-15, Volt, SS Punched Grid Resistance box For 5HP EOT Crane motor, 2step. Specifications: Type: - MC, HP-15, Vol

Yantra India Limited

Indian Oil Corporation Limited

Indian Army