Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
10,894 live and archived tenders were published on this date.
Adding a sidebar filter continues in Live Tenders while preserving this publication date.
10,894 results • Latest
National Rural Health Mission (nrhm) State Health Society
Ntpc Limited
10 - M5512990202, 20 - M5512990204, 30 - M5512990203, 40 - M5501990749, 50 - M5501990748, 60 - M5501990747
Hindustan Petroleum Corporation Ltd
Custom Bid for Services - SCHEDULE 1 FOR SITC OF RECD IN 750KVA DG SET OF KIRLOSKER MAKE AT MCC1, Custom Bid for Services - SCHEDULE 2 FOR SITC OF RECD IN 500KVA DG SET OF CUMMINS MAKE AT MCC1, Custom Bid for Services - SCHEDULE 3 FOR SITC OF RECD IN 500KVA DG SET OF GREAVES MAKE AT MCC2 Similar Category Operation and Maintenance Of Electrical Systems/Electrical Installations Operation and Maintenance Of Electrical Systems/Electrical Installations Operation and Maintenance Of Electrical Systems/Electrical Installations
Urban Development And Housing Department
Hindustan Aeronautics Limited (hal)
P RUBBER HO-68-1NP-P202-8-2200, RUBBER Cord Wing- Fus. Fairing 01K-2K-0010-001-0R0
Visvesvaraya Iron And Steel Plant
Hindustan Petroleum Corporation Ltd
National Aluminium Company Limited, Bhubaneswar
Item 1, Item 2, Item 3, Item 4, Item 5, Item 6, Item 7, Item 8, Item 9, Item 10, Item 11, Item 12, Item 13, Item 14, Item 15, Item 16, Item 17, Item 18, Item 19, Item 20, Item 21
Hindustan Petroleum Corporation Ltd
Transformer oil Testing 10 MVA RRPS, Transformer oil Testing 1.5 MVA RRPS, Transformer oil filtration 10 MVA RRPS, Transformer Oil Filtration 1.5 MVA RRPS, Testing of 10 MVA Transformer as per OISD 137 RRPS, Testing of 1.5MVA Transformer as per OISD 137 RRPS, Transformer Oil Testing 10 MVA Transformer RMDS, Transformer Oil Testing 2.5 MVA Transformer RMDS, Oil Filtration 10 MVA Transformer RMDS, Oil Filtration 2.5 MVA Transformer RMDS, Testing of 10 MVA Transformer RMDS, Testing of 2.5 MVA Transformer RMDS, Transformer Oil Testing 10 MVA Transformer BIPS, Transformer Oil Testing 1.6 MVA Transformer BIPS, Oil Filtration 10 MVA Transformer BIPS, Oil Filtration 1.6 MVA Transformer BIPS, Testing of 10 MVA Transformer BIPS, Testing of 1.6 MVA Transformer BIPS, Transformer Oil Testing 500 KVA Transformer BRDS, Oil Filtration 500 KVA Transformer BRDS, Testing of 500 KVA Transformer BRDS Bid Number ( ) : GEM/2025/B/6159468 Dated : 22-04-2025 Bid Document 1/19
Basic Education Department Uttar Pradesh
Nuclear Power Corporation Of India Limited
LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5/Section 3) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Primary product category LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5/Section 3) Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/6134204 Dated : 22-04-2025 Bid Document 1/15 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Item wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 2. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over, Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. 2/15 Evaluation Method ( Item Wise Evaluation Method ) Contract will be awarded schedulewise and the determination of L1 will be done separately for each schedule. The details of item-consignee combination covered under each schedule are as under: Evaluation Schedules Item/Category Quanti ty Schedule 1 Led Luminaire For Road And Street Lights (v2) Conforming To Is 10322 (part 5 Section 3) 60 Schedule 2 Led Luminaire For Road And Street Lights (v2) Conforming To Is 10322 (part 5 Section 3) 35 Schedule 3 Led Luminaire For Road And Street Lights (v2) Conforming To Is 10322 (part 5 Section 3) 20 LED Luminaire For Road And Street Lights (V2) Conforming To IS 10322 (Part 5 Section 3) ( 60 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) LED RATING LED Rating (in Watts) System Wattage/Rated Power 36, 40 LED luminaire luminous Efficacy (Lumen/watt) (Hint: Total Lumen Calculation: Example: 18 W LED Rating x 100 Lumen/Watt = 1800 Lumens, 18 W LED Rating x 120 Lumen/Watt = 2160 Lumens, 18 W LED Rating x 140 Lumen/Watt = 2520 Lumens) 140 Or higher Color Temperature of LEDs (in K ) 6500 ELECTRICAL CHARACTERISTIC Input operating voltage range and frequency 140 to 270 Volts AC at 50 Hz +/-2 CONTROL GEAR Number of electronic control gear in the luminaire (power supplies) 1, 2 Or higher PROTECTION The luminaire protected against surges and transients, Internal, (in KV, Minimum) 4, 5 Or higher The luminaire is protected against surges and transients, External, (in KV, Minimum) (hint: In case of no protection select "0") 10 Or higher 3/15 LUMINAIRE Provision of luminaire connecting wire along with the supply of material 50 cm (ISI marked to IS 9968), 100 cm (ISI marked to IS 9968) REPORTS AND CERTIFICATIONS Warranty for free replacement (in years) 2, 3, 4, 5 Or higher Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - LED Luminaire For Road And Street Lights (V2) Conforming To IS 10322 (Part 5/Section 3) ( 60 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) 1) Length of ISI marked three core wire (shall be provided along with supply of material) 2)Rated voltage 3)Number of electronic control gear (power supplies) 1) 50-100 cm 2)220-250 V AC 50 Hz 3)1 No.(Required Only) 4)LED chip Efficacy 5)Operating temperature range 4)?130 Lm/Watt(If a question mark appears, it means"greater than or equal to") 5)-10° C to+50° C 6)Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) 6)Yes 7)Protection of the entire housing (both LED section and driver section) as perIS:10322 (Part 1):1982latest 7)IP 66 8)LM 79 (photometry) (Ref.IS:16106:2012), LM 80 & TM 21 (Ref.IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab/NABL/ILAC accredited lab. Reports shall be furnished to the buyer/consignee on demand. 8)Yes * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity 4/15 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 60 60 LED Luminaire For Road And Street Lights (V2) Conforming To IS 10322 (Part 5 Section 3) ( 35 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) LED RATING LED Rating (in Watts) System Wattage/Rated Power 70, 72, 90 LED luminaire luminous Efficacy (Lumen/watt) (Hint: Total Lumen Calculation: Example: 18 W LED Rating x 100 Lumen/Watt = 1800 Lumens, 18 W LED Rating x 120 Lumen/Watt = 2160 Lumens, 18 W LED Rating x 140 Lumen/Watt = 2520 Lumens) 140 Or higher Color Temperature of LEDs (in K ) 6500 ELECTRICAL CHARACTERISTIC Input operating voltage range and frequency 140 to 270 Volts AC at 50 Hz +/-2 CONTROL GEAR Number of electronic control gear in the luminaire (power supplies) 1, 2 Or higher PROTECTION The luminaire protected against surges and transients, Internal, (in KV, Minimum) 4, 5 Or higher The luminaire is protected against surges and transients, External, (in KV, Minimum) (hint: In case of no protection select "0") 10 Or higher LUMINAIRE Provision of luminaire connecting wire along with the supply of material 40 cm (ISI marked to IS 9968), 50 cm (ISI marked to IS 9968), 100 cm (ISI marked to IS 9968) 5/15 REPORTS AND CERTIFICATIONS Warranty for free replacement (in years) 2, 3, 4, 5 Or higher Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - LED Luminaire For Road And Street Lights (V2) Conforming To IS 10322 (Part 5/Section 3) ( 35 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) 1) Length of ISI marked three core wire (shall be provided along with supply of material) 2)Rated voltage 3)Number of electronic control gear (power supplies) 1) 50-100 cm 2)220-250 V AC 50 Hz 3)1 No.(Required Only) 4)LED chip Efficacy 5)Operating temperature range 4)?130 Lm/Watt(If a question mark appears, it means"greater than or equal to") 5)-10° C to+50° C 6)Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) 6)Yes 7)Protection of the entire housing (both LED section and driver section) as perIS:10322 (Part 1):1982latest 7)IP 66 8)LM 79 (photometry) (Ref.IS:16106:2012), LM 80 & TM 21 (Ref.IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab/NABL/ILAC accredited lab. Reports shall be furnished to the buyer/consignee on demand. 8)Yes * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 6/15 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 35 60 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days LED Luminaire For Road And Street Lights (V2) Conforming To IS 10322 (Part 5 Section 3) ( 20 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) LED RATING LED Rating (in Watts) System Wattage/Rated Power 110, 120 LED luminaire luminous Efficacy (Lumen/watt) (Hint: Total Lumen Calculation: Example: 18 W LED Rating x 100 Lumen/Watt = 1800 Lumens, 18 W LED Rating x 120 Lumen/Watt = 2160 Lumens, 18 W LED Rating x 140 Lumen/Watt = 2520 Lumens) 100, 120, 140 Or higher Color Temperature of LEDs (in K ) 6500 ELECTRICAL CHARACTERISTIC Input operating voltage range and frequency 140 to 270 Volts AC at 50 Hz +/-2 CONTROL GEAR Number of electronic control gear in the luminaire (power supplies) 1, 2 Or higher PROTECTION The luminaire protected against surges and transients, Internal, (in KV, Minimum) 4, 5 Or higher The luminaire is protected against surges and transients, External, (in KV, Minimum) (hint: In case of no protection select "0") 10 Or higher LUMINAIRE Provision of luminaire connecting wire along with the supply of material 50 cm (ISI marked to IS 9968), 100 cm (ISI marked to IS 9968) 7/15 REPORTS AND CERTIFICATIONS Warranty for free replacement (in years) 2, 3, 4, 5 Or higher Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - LED Luminaire For Road And Street Lights (V2) Conforming To IS 10322 (Part 5/Section 3) ( 20 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) 1) Length of ISI marked three core wire (shall be provided along with supply of material) 2)Rated voltage 3)Number of electronic control gear (power supplies) 1) 50-100 cm 2)220-250 V AC 50 Hz 3)1 No.(Required Only) 4)LED chip Efficacy 5)Operating temperature range 4)?130 Lm/Watt(If a question mark appears, it means"greater than or equal to") 5)-10° C to+50° C 6)Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) 6)Yes 7)Protection of the entire housing (both LED section and driver section) as perIS:10322 (Part 1):1982latest 7)IP 66 8)LM 79 (photometry) (Ref.IS:16106:2012), LM 80 & TM 21 (Ref.IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab/NABL/ILAC accredited lab. Reports shall be furnished to the buyer/consignee on demand. 8)Yes * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 8/15 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 20 60 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms. 2 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses Liquidated Damages Liquidated Damages as stipulated under Clause No.15 (iii) of GeM GTC shall not be applicable for the contract awarded against this Bid. Additional Specification Parameters, if any Additional Specification Parameters as stipulated in the Bid Document must be complied by the B idder/Seller and supply may be made accordingly otherwise material will be liable for rejection. Clarifications/documents submitted by the bidder Documents not submitted along with the bid and clarifications sought during the evaluation stage, but now being submitted during representation shall not be considered, for evaluation. MSE Benefits Purchase preference will be given to MSEs as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Me dium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. Trades ar e excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. Releva nt documentary evidence in this regard shall be uploaded along with the bid. If L-1 is not an MSE and MSE Seller(s) has/have quoted price within L-1+15% of margin of purchase preference/price band defined in relevant policy, such Seller shall be given opportunity to match L-1 price and con tract will be awarded for defined percentage in bid document of total QUANTITY. Benefits of Publi c Procurement Policy shall be given to all eligible MSEs as stated under Point no.3 of FAQ dt. 25/0 3/2022, irrespective of product categories and the category they are registered under viz. Manufa cturing or Service. Documents related to Payment The seller shall submit Original invoice clearly marked for ‘Bill to’ and ‘Shipped to’, Annexure-F (c opy enclosed) (Additional Doc 1), Seller’s Bank details, E-invoice if applicable to seller based on hi s turnover, Test certificate (if applicable) etc to the Paying Authority directly, immediately after di spatching material to the Consignee. As payment is to be released in a time bound manner, non-r eceipt of these document in time may lead to rejection of supplies.” 9/15 Note : Following documents shall be submitted by the bidder(s) along with the bid: - 1) Bidder is mandatorily required to submit an Undertaking as per attached Annexure-D on Comp any’s Letter Head along with offer, failing which, their offer will not be evaluated and rejected wit hout asking any further clarification with regard to the same. (Additional Doc 2) 2) 'Specifications Compliance Sheet' to be filled by the bidder, if asked in the tender. BANNING OF BUSINESS DEALINGS BY NPCIL/BUYER NPCIL reserves the right to initiate Banning as per NPCIL’s Banning of business dealings as mentioned belo w and are independent of actions under GeM’s IM (Incident Management) Policy. The words banning, blacklisting, de-registered, debarred, holiday, suspension of business etc., means the s ame. The words NPCIL, Corporation, Buyer etc., means the same. The words Contractor, Bidder, Seller, Service Provider etc., means the same. 1 . Grounds for Banning The business dealing with the Contractor/Bidder/Seller/Service Provider shall be liable for banning, on acco unt of the reasons attributable to them, which shall include, but not limited to the following: 1.1.1. Involvement in cartel formation during bidding. 1.1.2. Baseless allegations by the bidder on NPCIL/Corporation/Buyer evaluation processes or officials. 1.1.3. If any of the owner, proprietor or partner of the Contractor, is convicted by a court of law, during bid ding process or currency of the contract, for offences involving corrupt and fraudulent practices including misrepresentation of the facts, moral turpitude in relation to its business dealings with NPCIL. 1.1.4. Malafide/unlawful acts/malpractices or improper conduct on part of Contractor based on the appr oved findings of the Investigation Agency. 1.1.5. If the Contractor misuses the premises or facilities of the NPCIL forcefully occupies, tampers or dam ages the Company’s properties etc. or fails to vacate the properties/land/complex within reasonable time li mit as specified or even after receiving the notices from the department. 1.1.6. Security concerns for the assets of the Corporation and State. 1.1.7. Submission of bids that contain false information or falsified documents or the concealment of such i nformation in the bids in order to influence the outcome of eligibility screening or/at any other stage of th e public bidding and execution. 1.1.8. Withdrawal of a bid or refusal to accept an award of contract with the NPCIL without justifiable cause, after being adjudged as the successful bidder. 1.1.9. Supply of Counterfeit items Breach of Code of Integrity. 1.1.10. Bidder shall not act in contravention of the codes which includes 1.1.10.1 Prohibition of a. Making offer, solicitation or acceptance of bribe, reward or gift or any material benefit, either directly or indirectly, in exchange for an unfair advantage in the procurement process or to otherwise influence the p rocurement process. b. Any omission or misrepresentation that may mislead or attempt to mislead so that financial or other be nefit may be obtained or an obligation avoided. c. Any conclusion, bid rigging or anticompetitive behavior that may impair the transparency, fairness and t 10/15 he progress of the procurement process. d. Improper use of information provided by the procuring entity to the bidder with an intent to gain unfair advantage in the procurement process or for personal gain. e. Any financial or business transactions between the bidder and any official of the procuring entity related to tender or execution process of contract; which can affect the decision of the procuring entity directly or i ndirectly. f. Any coercion or any threat to impair or harm, directly or indirectly, any party or its property to influence the procurement process. g. Obstruction of any investigation or auditing of a procurement process. h. Making false declaration or providing false information for participation in tender process or to secure a contract; 1.1.10.2 Disclosure of conflict of interest 1.1.10.3 Disclosure by the bidder of any previous transgression made in respect of the provisions of above 1.1.10.1 with any entity in any country during the last three years or of being debarred/banned by any ot her procuring entity. 1.2 Show Cause Notice 1.2.1 NPCIL will issue Show Cause Notice to the Contractor on noticing/receipt of a complaint of any irregul arities and/or misconduct and/or unethical practice as mentioned in clause no. 1.1. 1.2.2 Upon receipt of Show cause notice, the Contractor is required to submit the reply to Show Cause Noti ce within 30 days of its receipt and no extension shall be given without justifiable reasons. TheContractor s hall also be given an opportunity for oral hearing to present the case in person to NPCIL and the date of Or al Hearing will be indicated in the Show Cause Notice. Only the regular employees of Contractor will be per mitted to represent the Contractor during the Oral hearing, and nooutsider shall be allowed to represent th e Contractor on their behalf. 1.3 Period of Banning The period of banning shall be for a period of not exceeding 2 (two) years and not less than 6 (six) months as considered appropriate by NPCIL. 1.4 Effect of Banning of Business Dealings by NPCIL In case NPCIL has banned the business dealing with the bidder/contractor, the following shall be the conse quences on issuance of the order of banning of business dealings with the bidder/contractor: 1.4.1 No Contract of any kind whatsoever shall be placed to such banned firms including its allied firmsafter the issue of Banning Order by NPCIL. The Contractor including their allied firms shall not be allo wed to participate in any tender enquiry till completion of Banning period. If the Contractor has already pa rticipated in tender process and the price bids are not opened, his techno-commercial bid will be rejected and price bid will be kept unopened. In cases, where the price bids of Contractor have been opened prior t o the order of banning, such bids shall be rejected. However, incase such banned Contractor is Lowest (L1), next lowest firm shall be considered as L1. Bid Security, if any, submitted by such banned Contractors sh all be returned to the bidder. 1.4.2 Contractors shall not be permitted to participate in any business process in any form or entity i.e., as an Associate/Collaborator/Joint Venture Partner/Consortium Partner of the Main Contractor even if the bann ing order is passed subsequent to opening of Part-I bids. 1.4.3 Contractor shall not be allowed to participate as Sub-Vendor/sub-contractor in the tenders for contra cts for works, service, supplies. 1.4.4 Even if, the banned Contractor is an approved Sub-vendor under any Contract for such equipment/co mponent/service, the Main Contractor shall not be permitted to place Work order/Purchase order/Service C ontract on the banned Contractor as a sub-vendor after the date of banning even though the name of the p arty has been approved as a sub-vendor prior to the order of banning. 11/15 1.4.5 The completion certificate issued to the contractor shall make a mention regarding banning duringex ecution of the contract. 1.4.6 Banned bidders shall not be permitted to submit their bid. The bid submitted by the banned bidder s hall be summarily rejected. 1.4.7 Contracts concluded before the issue of the banning order shall, not be affected by the banning order . 1.4.8 Banning shall automatically be extended to all Allied firms of the Contractor. In case of Joint venture Consortium is banned all partners will also stand debarred for the period specified in the Banning Order. T he names of all partners should be clearly specified in the “Banning order”. 1.4.9 Banning in any manner does not impact any other contractual or other legal rights of NPCIL. 1.4.10 Banning under the provisions of Banning of Business Dealings of NPCIL is applicable only for NPCIL. 1.5 Definition of Allied Firm: Allied Firm means all concerns which come within the sphere of effective influence of the banned firm. In determining this, the following factors shall be taken into consideration: a). Whether the management is common; b). Majority interest in the management is held by the partners or directors of banned/suspended firm; c). Substantial or majority shares are owned by the banned/suspended firm and by virtue of this it has a c ontrolling voice; d). Directly or indirectly controls, or is controlled by or is under common control with another bidder; f). All successor firms will also be considered allied firms. END USE CETIFICATE/VERIFICATION In case applicable, Bidder shall ensure that items to be imported to India do not have US origin component s above the de minims level. End use verification shall not be agreed by NPCIL in case of imports under an y circumstances. Further, the bidder/contractor shall make attempts to import raw materials/component s, if necessary, without insisting for “End User Certificate”. DELIVERY SCHEDULE Date of delivery of the Stores stipulated in the Contract, shall be the essence of the Contract and delivery of Stores must be completed by the dates specified therein. Unless otherwise agreed, the Contract shall c ome into force from the date of issue of priced Purchase Order (Effective Date) and accordingly contractual delivery period shall be reckoned from that date for the purpose of fixing Contractual Delivery Date (CDD). RIGHT OF RECOURSE UNDER CIVIL LIABILITY FOR NUCLEAR DAMAGES ACT 2010 & RULE2011 T HEREOF Since, Requirement is for PHWR, NPCIL is the system designer and technology owner, being responsible for safety design of such installations in this tender, NPCIL shall assume the role of supplier in accordance wit h the explanation of the term “supplier” given in Rule 24 of the CLND Rules, 2011 and in the context of sec tion 17(a) and (b) of the CLND Act, 2010. PRICE BREAK-UP 12/15 A . In case of two part tenders, the Bidder shall take special care not to mix up any price details require d to be submitted against Part-II (Price bid) with Part-I (Technical & Commercial bid except price) an d vice versa. Any violation of the above shall lead to summarily rejection of bid as being non-respon sive. B . Wherever asked for, the bidder shall be required to submit complete break-up of “Total Price” as pe r prescribed “Price Bid Break-up/SOQR” format in GeM Portal. In such case, the non-submission of th e “Price Bid Break-up/SOQR” or submission of irrelevant document or submission of No/Nil value aga inst all items of the “Price Bid Break-up/SOQR” shall lead to rejection of such bids. However, in case No/Nil rate is quoted against some of the item(s), the price of such item(s) shall be deemed to be ze ro. C . Addition/deletion/modification of any item in the prescribed “Price Bid Break-up/SOQR” format is not acceptable unless authorized by Buyer and accordingly, bids with any unauthorized addition/deletio n/modification in the prescribed “Price Bid Break-up/SOQR” format shall be summarily rejected. D . Calculations for Price Bid Evaluation for Single Packet/Part Bids, Part-II (price bid) evaluation for Two Packet/Part Bids and Contract Order Placement: 1 . For Price Bid Evaluation as per price evaluation criteria as well as for award of contract, “Total Price” quoted by Bidder in GeM Portal shall only be considered. The same “Total Price” shall only be consi dered for other purposes (i.e., negotiation, price matching in case of MSE/MII purchase preference/B id splitting, Financial score in case of QCBS tenders, Reverse Auction (RA) etc).However, the “Price B id Break-up/SOQR” submitted in GeM Portal or “Price Bid Break-up/SOQR” arrived at as per calculati ons mentioned in below clauses, as the case may be, will only be used as price breakup for the purp ose of interim/running bill payments. 2 . The “Total Price” quoted should match with the total of price of all items of the “Price Bid Break-up/S OQR”. 3 . For arriving at the item-wise amount as well as at the total of all items of the “Price Bid Break-up/SO QR”, the quantity multiplied by the quoted rates shall govern and if required, other figures will stan d corrected accordingly. 4 . In case of mismatch between “Total Price” quoted by Bidder in GeM Portal and total of price of all it ems of the “Price Bid Break-up/SOQR”, the “Total Price” quoted by Bidder in GeM Portal only shall b e considered. The prices of all the items of the “Price Bid Break-up/SOQR” mentioned by the Bidder i n the submitted document in GeM Portal, will stand adjusted accordingly in proportion to the weight ed average of itemwise amount. 5 . Bidder get option to submit Revised “Price Bid Break-up/SOQR” during Negotiation or Reverse Aucti on (RA). While submitting the Revised “Price Bid Break-up/SOQR”, the Bidder should not increase pr ice of any item(s) from the originally submitted (i.e., uploaded at time of Bid submission) “Price Bid Break-up/SOQR”. Incase, during negotiation price is increased for any item(s) by the bidder, the sam e shall not be accepted and will be dealt as stipulated in point above. 6 . In case of price matching scenario during MSE/MII Purchase Preference/
Bharat Heavy Electricals Limited (bhel)
INDUSTRIAL X RAY FILMS MEETING SYSTEM CLASSIFICATION C3, INDUSTRIAL X RAY FILMS MEETING SYSTEM CLASSIFICATION C5
Indian Army
Amiodarone Hcl 150 mg 3 ml Inj, Morphine 15 mg 1 ml Inj, Phenylephrine 10 mg 1 ml Inj, Lignocaine 2 percent single use IV without preservative bott of 30 ml Inj Xylocard Inj, Calcium 9 mg plus Calcium gluconate 50 mg Inj for IV use 10 ml Injection, Thiopentone Inj of 0 point 5 g without water for Injection, Ranitidine HCl 50mg 2 ml Inj, Esmolol 100 mg 10 ml Inj, Lignocaine HCl 2 percent with Adrenaline 1 is to 80000 30 ml Inj, Neostigmine 0 point 5 mg 1 ml Inj, Inj Dexmedetomidine 100 mcg per ml 50 ml vial, Diltiazem 5 mg per ml Inj, Tab Lamotrigine 100 mg, Trypsin with chymotrypsin Tab, Chlorzoxazone 500 mg plus Diclofenac Sodium 50 mg plus Paracetamol 325 mg Tab, Set Infusion microdip pre sterilised disposable for paediatric use consisting of nontoxic PVC tubing 1700mm with drip chamber of minimum 1000 ml capacity Pedia drip
Indian Air Force
935397, 1494578, 1625918, 1597764, 1575862
National Aluminium Company Limited, Bhubaneswar
Material Code -21307620020 -DANFOSS MAKE 45 KW VFD, Material Code -21307610010 - DANFOSS VFD 37KW, Material Code -21307620010 - DANFOSS MAKE 5.5 KW VFD, Material Code -21307620000 - DANFOSS MAKE 3 KW VFD, Material Code -00000000001 - DUMMY - PLEASE DO NOT QUOTE THIS ITEM
Indian Navy
Custom Bid for Services - REDESIGN AND COMPREHENSIVE UPGRADATION OF THE PRINCIPAL MEDICAL OFFICER COMPLEX COMPRISING OF MAIN OFFICE WAITING AREA PAs ROOM PANTRY WASHROOM PMO SECTRETARIAT Similar Category Repair and Overhauling Service Repair, Maintenance and Installation of Plant Systems/Equipments
Indian Army
D IFA RE 20 Isotretinoin 20 mg Cap, D IFA RE 20 Metronidazole 1 Tube of 30gm, D IFA RE 20 Paraffin Soft yellow jar of 4 kg, D IFA RE 20 Silver sulphadiazine 1 cream w v jar of 500 gms, D IFA RE 20 Pulv Talc, D IFA RE 20 Triamcinolone Acetate 10 mg ml Inj, D IFA RE 20 Clarithromycin 1 gel 15 gm tube, D IFA RE 20 Betamethasone 0 DOT 1 Salicylic Acid 3 cream 20 gm tube, D IFA RE 20 Fusidic Acid cream 2 w w 10 g Tube, D IFA RE 20 Lignocaine 2 DOT 5 Prilocaine 2 DOT 5 Tube of 30gm, D IFA RE 20 Acitretin 25 mg Cap, D IFA RE 20 Povidone Iodine Germicidal Gargle 2 w v, D IFA RE 20 Povidone Iodine 5 Ointment 250 gm jar, D IFA RE 20 Povidone Iodine 5 Solution 500 ml glass bottle, D IFA RE 20 Povidone Iodine 7 DOT 5 Solution 100 ml, D IFA RE 20 Povidone Iodine 7 DOT 5 Solution 500 ml, D IFA RE 20 Chlorhexidine Gluconate Soln 5 5 Ltr HDPE jar, D IFA RE 20 Premoistened Towelettes in dispenser nomenclature as per pdf uploaded, D IFA RE 20 Chlorhexidine gluconate solution equivalent to 4 w v with Isopropanol 10 Ethoxylated alkylphenol 10 Fatty acid diethanolamide 10 Acetic acid glacial, D IAF RE 20 60 v v Ethyl Alcohol with Benzalkonium Chloride Glycerine Dimethicone Cyclopentasiloxane nomenclature as per pdf uploaded, D IFA RE 20 1 w v available iodine in non oxynoi iodine surfactant base 500 ml bott, D IFA RE 20 Chlorhexidine gluconate 2 in 70 isopropyl alcohol 500 ml bott, D IFA RE 20 Propan 2 ol 63 DOT 0 g equals 72 vol Benzalkonium Chloride 0 DOT 025 g Purified Water Sunset Yellow dye 500 ml Bott, D IFA RE 20 Alcohol free 2 saturated Chlorhexidine Gluconate Cloth in a non alkaline base 15 20 cm x 15 20 cm size, D IFA RE 20 Alcohol, D IFA RE 20 Chloroxylenol solution Potassium Hydroxide nomenclature as per pdf uploaded, D IFA RE 20 Paraformaldehyde Tab, D IFA RE 20 Cilnidipine 5 mg Tab, D IFA RE 20 Heparin 10unit ml 10ml Inj cath flush Inj, D IFA RE 20 Frusemide 40 mg Tab, D IFA RE 20 Ribavirin 200mg Cap, D IFA RE 20 Polidocanol 3 2ml Inj, D IFA RE 20 Antispasmodic Tab containing Mefenamic Acid 250 mg and Dicyclomine HCl 10 mg, D IFA RE 20 Trypsin Chymotrypsin 100000IU Tab, D IFA RE 20 Metoclopramide 10 mg Tab, D IFA RE 20 Mebeverine HCl 135 mg Tab, D IFA RE 20 Isapgol Ispaghula husk 3 DOT 5 gm, D IFA RE 20 Bisacodyl 5 mg Tab, D IFA RE 20 Paraffin Liquid in bottle of 100 ml, D IFA RE 20 Loperamide 2mg Tab, D IFA RE 20 Simethicone 80mg and Charcoal 400 mg Tab, D IFA RE 20 Ethinyl Estradiol 30 mcg Drosperinone 33 mg Tab, D IFA RE 20 Ethinyl Estradiol 0 DOT 035mg Cyproterone Acetate 2mg pack of 21 Tablets, D IFA RE 20 Misoprostol 100 mcg Tab, D IFA RE 20 Desogestrel 0 DOT 075 mg Tab, D IFA RE 20 Isoxsuprine 10mg Tab, D IFA RE 20 Levonorgestrel 0 DOT 25 mg Ethinylestradiol 0 DOT 03mg pack of 21 Tab, D IFA RE 20 Obstetric antiseptic cream containing Dichloroxylenol 1 Terpineol 1 Phenol 0 DOT 25 in lubricant base, D IFA RE 20 Conjugated Estradiol 0 DOT 625 mg per gm tube of 15 gm Applicator Bid Details 2/44
Indian Army
D IFA RE 18 Carbimazole 20 mg Tab, D IFA RE 18 Desmopressin Acetate 0 DOT 1 mg Tab, D IFA RE 18 Ethambutol 1200 mg Tab, D IFA RE 18 Mycophenolate Mofetil 250 mg Tab, D IFA RE 18 Saccharomyces Boulardii 250mg Cap, D IFA RE 18 Spacer Device for inhaler, D IFA RE 18 Diethylcarbamazine 50mg Tab, D IFA RE 18 Ampicillin IP 250 mg Cap, D IFA RE 18 Ampicillin IP 500 mg Cap, D IFA RE 18 Co-trimoxazole Suphamethoxazole 400 mg Trimethoprim 160 mg Tab, D IFA RE 18 Co-trimoxazole Suphamethoxazole 100 mg Trimethoprim 20 mg Tab, D IFA RE 18 Metronidazole IP 200 mg Tab, D IFA RE 18 Cefotaxime Sodium 250mg Inj, D IFA RE 18 Clofazimine 100mg Cap, D IFA RE 18 Artesunate 25 mg Sulphadoxine 250 mg Pyrimethamine 12 DOT 5 mg Tab, D IFA RE 18 Cephadroxil 500mg Cap, D IFA RE 18 Rifampicin oral susp 100 mg 5 ml bottle of 200 ml, D IFA RE 18 Amoxycillin 250 mg Cloxacillin 250 mg Cap, D IFA RE 18 Rifampicin 150mg Cap, D IFA RE 18 Tetracyclin IP 250mg Cap, D IFA RE 18 Rifampicin 450 mg Isoniazid 300 mg combination Cap Tab, D IFA RE 18 Rifampicin 600mg Isoniazid 300mg Tab, D IFA RE 18 Ethambutol 200mg Tab, D IFA RE 18 Isoniazid 100mg with Pyridoxine 5mg Tab, D IFA RE 18 Isoniazid 300mg Tab, D IFA RE 18 Streptomycin 1g Inj, D IFA RE 18 Pyrazinamide suspention 250 mg 5 ml Syp Bottle of 100 ml, D IFA RE 18 Levofloxacin IP 250 mg Tab, D IFA RE 18 Ciprofloxacin 250mg Tinidazole 300mg Tab, D IFA RE 18 Fluconazole 50 mg Cap Tab, D IFA RE 18 Tinidazole IP 300 mg Tab, D IFA RE 18 Griseofulvin 500mg Tab, D IFA RE 18 Erythromycin Stearate IP 500 mg Tab, D IFA RE 18 Amikacin IP 100 mg 2 ml Vial, D IFA RE 18 Artesunate 50 mg Tab, D IFA RE 18 Sulphadoxine 500 mg Pyrimethamine 25 mg Tab, D IFA RE 18 Chloroquine Phosphate Syp containing 50 mg base per 5ml bottle of 60 ml, D IFA RE 18 Chloroquine Phosphate 250 mg Tab, D IFA RE 18 Primaquine 7 DOT 5mg base Tab, D IFA RE 18 Ampicillin Sodium IP 250 mg Inj, D IFA RE 18 Cefotaxime Sodium 250mg Sulbactam 125mg Inj, D IFA RE 18 Silver Sulphadiazine 1 Ointment 20 gm tube, D IFA RE 18 Cyclosporine A micro emulsion 25 mg Cap, D IFA RE 18 Morphine Hydrochloride 30 mg Tab, D IFA RE 18 Morphine Hydrochloride 10 mg Tab, D IFA RE 18 Hydroxyurea 500 mg Cap, D IFA RE 18 Imatinib Mesylate 100mg Cap Bid Details 2/43
Hindustan Aeronautics Limited (hal)
NICKEL BAR, AMS 5707, Ø 150± 4 mm
Indian Army
Carbimazole 5 mg Tab, Caroverine tab 20 mg, Cap Cefpodoxime 200mg plus Clavulanate 125 mg, Celecoxib 100 mg Tab, Tab Cilnidipine 10 mg plus Metoprolol 50 mg
Gail India Limited
ITEM SL NO - 1, ITEM SL NO - 2, ITEM SL NO - 3, ITEM SL NO - 4, ITEM SL NO - 5, ITEM SL NO - 6, ITEM SL NO - 7, ITEM SL NO - 8, ITEM SL NO - 9, ITEM SL NO - 10, ITEM SL NO - 11, ITEM SL NO - 12, ITEM SL NO - 13, ITEM SL NO - 14, ITEM SL NO - 15, ITEM SL NO - 16, ITEM SL NO - 17, ITEM SL NO - 18, ITEM SL NO - 19, ITEM SL NO - 20, ITEM SL NO - 21, ITEM SL NO - 22, ITEM SL NO - 23, ITEM SL NO - 24, ITEM SL NO - 25, ITEM SL NO - 26, ITEM SL NO - 27, ITEM SL NO - 28, ITEM SL NO - 29, ITEM SL NO - 30, ITEM SL NO - 31, ITEM SL NO - 32, ITEM SL NO - 33, ITEM SL NO - 34, ITEM SL NO - 35, ITEM SL NO - 36, ITEM SL NO - 37, ITEM SL NO - 38, ITEM SL NO - 39, ITEM SL NO - 40, ITEM SL NO - 41, ITEM SL NO - 42, ITEM SL NO - 43, ITEM SL NO - 44, ITEM SL NO - 45, ITEM SL NO - 46, ITEM SL NO - 47
Indian Army
4 point 5 slace 5 slace 5 point 5mm Anatomical LCP for distal femur 05 slace 16, Antirotation Proximal Femoral nail with Screws Assorted Sizes, Uncemented THR consisting of Grit-blasted biocompatible Titanium stem, Primary uncemented THR system, Proximally coated double slace triple taper, Primary uncemented THR system, Fully coated double slace triple taper, AO pattern DHS fixed angle Barrel Plate 130-150 degrees, 3-6 combi-holes, Interference screw with sheath construct Non metallic for secure fixation, Cannulated Tibial Nail with 5 proximal locking and 4 distal locking options, 4 point 5mm Narrow LCP with combi-hole technology, plate length 8-16 holes, Proximal humerus anatomical locking plate complete construct with 80 percentage, Uncemented THR with ceramic head, long stem, dual mobility linner, Ortho roll cast padding Cotton Size 10 cm X 3 mtr slace 15cm X 3 mtr, Bone Cement antibiotic loaded 40 gm, Vicryl No 2 with OS needle, Prolene Polypropylene Size No 1 40mm cutting needle, Polybutylate Coated Braided Polyester size 2 slace 5, 1 slace 2 Circle Taper, Vertical Isolation Drape for Hip surgery of clear transparent water proof, Sterile disposable U drape with tube holders coma 80inch x 124inch, Knee arthroplasty drape set, Adjustable Loop Cortical Button Device, Calcium sulphate pelletable powder for antibiotic delivery 10cc, Meniscal repair system with Trigger based positive deployment of 2 slace 4, Disposable pulse lavage system, Trabecular metal shell slace liner with augment, ceramic head, stem and 5 screws, Augmented Posterior stabilized modular knee replacement prosthesis, Posterior stabilized fixed bearing modular knee replacement prosthesis, Locking proximal tibial osteotomy plate titanium plate with 8 x compatible, 3 point 5mm Locking proximal Humerus periarticular plate 5-14 shaft, Cemented Bipolar hip prosthesis with double slace triple tapered polished, 3 point 5mm LCP, 5-18 holes, with compatible 60 percentage locking head, Distal Radius fixed slace preferably variable angle Volar Locking Plate 2 point 4, Railroad fixator set- Small, Medium and Larege with tapered HA coated, Knotless BioComposite suture anchors with closed eyelet 1 point 8 slace 2, 2point7slace3point5mm Low Profile Reconstruction Plates - Straight 3-20 holes, Ethibond excel No 5 Green braided polyester, 75cm long, 48mm 1slace2 circle, Ethibond Suture No 2, Revision knee prosthesis with rotating hinge, femoral component and tibial, Olecranon Plate, anatomical 3point5mm Right or Left, all sizes 2, 12 hole, Anatomical clavicle shaft locking plate 2point7slace3point5mm all lengths, AO pattern 4 point0 mm partially threaded cannulated cancellous screws, External stabilizing system Set for CTEV complete small slace medium slace large, Hook Plate 2point7slace3point5mm, all lengths, with combi-hole technology, Hip spacer mould different sizes with 2 packets of low viscosity antibiotic, TOPICAL DYNAPAR PLUS 30 ML DICLOFENAC DIETHYLAMINE BP 2, Sterile Packed 1point5slace1point8slace2point5slace2slace9slace3point5, Non-Adhesive Elastic reusable Compression crepe Bandage 10 cm x 4point, Iodophor impregnated sterile Adhesive Incise drape 35x35cmslace60cm, Sterile packed transparent Cling Drape, Vac hydrophobic dressing with 400-600 micron size reticulated structure, Water resistant Synthetic orthopaedic cast padding 10 cm x 3 meter, Disposable Mould for knee articulating spacer Different sizes small Bid Details 2/46 small
Indian Army
cre balloon for pulmonary size 12 to 15mm, Disposable PFT mouthpiece with bacterial filter Compatible with GANSHORN, Chest tube with Guidewire and scalpel and dilator assorted sizes 24 coma 28, Chest tube with Guidewire and scalpel and dilator assorted sizes 18 coma 20, Disposable nasal pillow mask for CPAP phillips, Endobronchial EBUS TBNA Needle 22G, cre balloon for pulmonary sizes 8 to 10mm, Mucus Extractor, Disposable nebulizer mouth piece coma mask coma channel tube and cup, Pigtail catheter 12 Fr, Pigtail Catheter 16Fr oblique 18 Fr oblique 20 Fr, Reusable Rat tooth and alligator jaw rotable grasping forcep Compatible with Olympus, Endobronchial EBUS TBNA Needle 25G, cre balloon for pulmonary size 15 to 18mm, cre balloon for pulmonary sizes 10 to 12mm, CANON LBP7010 oblique 7018C Colour Printer black starter 329 k coma Yellow starter 329 y coma magenta starter 329 M coma Cyan starter 329 for Respiratory dept, EBUS balloon Use for BF to UC OLYMPUS, Disposable home sleep test based on peripheral arterial tonomtry, Enzymatic Detergent Solution containing Bacterial protease greater than 8point5 percentage per 100ml, Delivery System for Salmeterol plus Fluticasone Rotacaps with pin puncture technology Bid Number ( ) : GEM/2025/B/6097935 Dated : 22-04-2025 Bid Document 1/22
Central Information Commission (cic)
Oil And Natural Gas Corporation Limited
Custom Bid for Services - Hard Chrome Plating services for Job upto One point Five meter length for rig component, Custom Bid for Services - Hard Chrome Plating services for Job upto One point Five meter length for BOP component, Custom Bid for Services - Hard Chrome Plating services for Job more than One point Five meter length for Rig component Similar Category Calibration Services Calibration Services Calibration Services
Central Silk Board
PETRIDISH, ERLENMEYER 250, ERLENMEYER 500, ERLENMEYER 1000, Beaker 1000, BEAKER 500, TEST TUBES, REAGENT BOTTLE 500, REAGENT BOTTLE 1000, ASPIRATOR BOTTLE, LABORATORY GLASSWARE DRYING RACK, SEAL TAPE, HAND GLOVES, TISSUE ROLL, TEST TUBE BASKET, TRANSPARENT POLYTHENE COVERS, PARAFILM DISPENSER
Sardar Vallabhbhai Patel National Police Academy
Conference Control Unit, System extension unit, Audio conference chairman unit, Audio conference delegate unit, Surface mounted Speakers, Power Amplifier, Job
Rashtriya Chemicals And Fertilizers Limited (rcf)
Indian Army
Strips for blood glucose testing bott of 100 strips accu check, Disposable Suction Catheter Size 8 FR, Cannulaide interface for CPAP large size 2, Cannulaide interface for CPAP medium size 1, Thumb operated suction catheter 10F, Thumb operated suction catheter 6F, Thumb operated suction catheter 8F, Nasal cannula for Oxygen administration for Micro Preemie lessthan 750 gm Equivalent to Neotech N4900, Tube Feeding smooth plastic infant 38cm long 5F with red flexible connector for nasogastric feeding, Cannulaide interface for CPAP small size 0
Mazagon Dock Shipbuilders Limited
Item no 01_18634643 Pipe Clamp MS Galv 10 OD, Item no 02_18634644 Pipe Clamp MS Galv 16 OD, Item no 03_18634645 Pipe Clamp MS Galv 20 OD, Item no 04_18634646 Pipe Clamp MS Galv 25 OD, Item no 05_18634648 Pipe Clamp MS Galv 38 OD, Item no 06_18634649 Pipe Clamp MS Galv 44.5 OD, Item no 07_18634650 Pipe Clamp MS Galv 57 OD, Item no 08_18634651 Pipe Clamp MS Galv 76.1 OD, Item no 09_18634652 Pipe Clamp MS Galv 88.9 OD, Item no 10_18634653 Pipe Clamp MS Galv 108 OD, Item no 11_18634654 Pipe Clamp MS Galv 133 OD, Item no 12_18634655 Pipe Clamp MS Galv 159 OD, Item no 13_18634658 Pipe Clamp MS Galv 323.9 OD, Item no 14_18634659 Pipe Clamp MS Galv 368 OD, Item no 15_18634660 Pipe Clamp MS Galv 10 NB, Item no 16_18634661 Pipe Clamp MS Galv 15 NB, Item no 17_18634662 Pipe Clamp MS Galv 20 NB, Item no 18_18634663 Pipe Clamp MS Galv 25 NB, Item no 19_18634664 Pipe Clamp MS Galv 32 NB, Item no 20_18634665 Pipe Clamp MS Galv 40 NB, Item no 21_18634667 Pipe Clamp MS Galv 65 NB, Item no 22_18634668 Pipe Clamp MS Galv 80 NB, Item no 23_18634669 Pipe Clamp MS Galv 100 NB, Item no 24_18634670 Pipe Clamp MS Galv 125 NB, Item no 25_18634672 Pipe Clamp MS Galv 200 NB, Item no 26_18634681 Pipe Clamp Sleeve Type ACS 40 NB, Item no 27_18634682 Pipe Clamp Sleeve Type ACS 50 NB, Item no 28_18634683 Pipe Clamp Sleeve Type ACS 65 NB, Item no 29_18634684 Pipe Clamp Sleeve Type ACS 80 NB, Item no 30_18634685 Pipe Clamp Sleeve Type ACS 100 NB Bid Number ( ) : GEM/2025/B/6122946 Dated : 22-04-2025 Bid Document 1/34
Indian Army
Funnel, Belt, Muffler, Cam, Valve, D Brake, Joint, Silencer, Air C, S Bush, Spring
Hindustan Aeronautics Limited (hal)
8MM THK RUBBER SHEET, RUBBER SHEET 3/16" Thk.
Indian Army
Aspirin 75 mg plus Atorvastatin 10 mg Tab, Tramadol Hcl 50 mg Cap Tab, Clotrimazole mouth paint 1percent bottle of 15 ml, Diethyl Ether solvent bott of 500 ml, Etoricoxib 120 mg Tab
Bharat Petroleum Corporation Ltd
ELECTRICAL PANEL LOCKOUT SMALL SQUARE, ELECTRICAL PANEL LOCKOUT SQ BIG 90 DEG, PADLOCK, SFTY ISOLATION, METAL SHACKEL BLUE, PADLOCK RED PN KRM K LSPL DE DK M, PADLOCK YELLOW PN KRM K LSPL DE DK M, PADLOCK BLUE PN KRM K LSPL DE DK M, PADLOCK GREEN PN KRM K LSPL DE DK M, Loto Arrangement, Switch Lockout, Electrical Handle Lockout with small Padlock KRM K EHLP
National Seeds Corporation Limited (nsc)
Armoured Vehicles Nigam Limited
CLAMP, 54.03. 64CB-ACB, CLAMP ASSY, 54.03. 64CBCB
Indian Navy
Microtainer tube with k2EDTA, Microtainer sterile, Microtainer sodium citrate, 1ml syringe with detachable needle, Ram nasal cannula Neotech N 4901, Ram nasal cannula Neotech N4902, Ram nasal cannula Neotech N4903, Endotracheal tube with lateral PVC tubing for surfactant delivery size 2, Endotracheal tube with lateral PVC tubing for surfactant delivery size 2.5, Endotracheal tube with lateral PVC tubing for surfactant delivery size 3, Salah bone marrow aspiration needle 16G, Salah bone marrow aspiration needle 18G, Jamshidi T rephine biopsy needle 13G, Suction catheter 6FR, Suction catheter 8FR, Paediatric nebulisation mask kit
Gujarat State Electricity Corporation Limited (gsecl)
Dg Of Defence Estate
Custom Bid for Services - custom bid for hiring of land surveyor for survey works at various locations at Bihar, West Bengal and Sikkim Similar Category GIS related Survey Services
Indian Army
Chlorpheniramine 2 mg and Phenylephrine 5 mg, Tab Lozenge Lidocaine BP 200 mg, Tab Phenylephrine Hydrochloride I point P point 2 point 5 mg Chlorpheniraminepoint 0 mg, Tab Phenylephrine Hydrochloride I point P point 5 mg Chlorpheniramine Maleate I point, Tab Sodium Fluoride I point P point 20 mg, Breath Easy Internal Nasal splint Adult, Disposable cartilage slicer, Dr fog Antifog kit, Dr fog Antifog Pre treated sponge, Electrosurgical PTFE coated pencil E Z clean, Epitaxis cathether double ballon large medium small, Larry Tube long and short, Lotn Povidone iodine with chlorhexidine scrub, Mongomery Safe t Tube Hebeler, Montgomery T Tube 10 Long, Montgomery T Tube 6 Long, OT light handle covers sterile disposable, Stammberger Sinu Foam Dissolvable Post op Carboxymethylcellulose CMC Dressing, Surgical fibrillar absorbable hemostat, TCA cautery stick, Neurosurgical sponges 6 X 75 mm, Puncture resistant gloves for high risk HIV per HBs Ag positive cases size 7 ansell nulife, Disposable Myringotomy Kit, Double Lumen Fenestrated tracheostomy tube with cuff size 6 7 8, Epistaxis Nasal Pack 3 point 5 cm Small, Hand piece lubricant spray, SINU KNIT dressings are a dissolvable carboxymethylcellulose CMC dressing that provide, Spray universal micromotor and hand piece for cleaner and lubricant with spray head 500 ml, Cleaner for Rigid and Flexible Endoscope Bott of 500 ml, Disposable Sterile Ear Wick 9 X 24 mm, Middle Ear surgery Kit containing suction tube connector and micro ear tips, Myringotomy Knives Maleable single use sterile, Nasal Pack 08 cm with out Air Way pack of 20, Nasal Pack 10 cm with out Air Way pack of 20, Nasal Packing PVA 8 point 0cm with Ventilation, Neck straps adjustable length and breathable for tracheostomy tube, Percutanous Tracheostomy set, Sinus Pack 3 point 5 cm pack of 20 Merocel l per Netcell, Sterion Endoscope Guards Non Vent Blue, Partial Ossicular Replacement Prosthesis With Adjustable Lenght, Total Ossicular Replacement Prosthesis With Adjustable Lenght, Absorbable gelatin sponge based topical absorbable flowable hemostat with 6cc syringe, Foam tracheostomy per cannula dressing large, Foam tracheostomy per cannula dressing small, Oint 2 Octyl cyanoacrylate topical tissue adhesive, Reinforced adhesive skin closure strip 1 per 2 X 4 Box of 50, Reinforced adhesive skin closure strip 1 per 4 X 4 Box of 50, Silk like adhesive tape with hypoallergenic adhesive 1 inch X 9 point 14 mtr Box of 6, Silk like adhesive tape with hypoallergenic adhesive 2 inch X 9 point 14 mtr Box of 4, Stoma cloth Protector, Suture polyglycolic acid braided coated polygalactine vicry size 3 0 round body, Suture Polyglycolic acid braided coated fast absorbable 90 cm taper point needle, Tracheal T Tubes medical grade silicone 10 mm, Tracheostomy Tube flexometallic hyperflex adjustable flange with cuff Size 7 point 0, Tracheostomy Tube with cuff with double lumen with fenestration with swivel neck plate, Elastic adhesive bandage IV Cannula Fixator, Microscope cover sterile disposable Chlorxylenol hand wash, Ear Bandage with Velcro, Ear drop Clotrimazole 1%, Beclomethasone 0.025%, Lignocaine 2%, Ofloxacin, Ear Drop Hydrocortisone + Glacial Acetic Acid 2%, Ear Drop Neomycin, beclomethasone, clotrimazole and lignocaine, Ear Drop Ofloxacin 0.3%, lidocaine 1.73%, Clotrimazole 1% w/v, Beclomethas, Ear Drop paradechlorobenzine 2.0%, benzocaine 2.7%, chlorbutol 5% turpenti, Ear drops acetic acid 2%, Ear drops Ofloxacin Bid Details 2/71
Indian Army
Multiplex RT PCR Kit For Respiratory Pathogen, Multiplex RT PCR Kits For Tropical Infection, HBV DNA Quantitative Real Time PCR Kit IVD and CE USFDA Approved, HCV RNA real time quantitative PCR detection kit compatible with Roche LC 480, Total Nucleic acid Extraction Kit, 96 well PCR plates for applied biosystem quant studio 5, One step revers transcription RT PCR polymerase chain reaction kit
Advanced Weapons And Equipment India Limited
TURNING INSERT AS PER ISO TURNING CODE WNMG080408- RP5 WPP30G OR EQUIVALENT GRADE, RH ISO HOLDER FOR EXT. TURNING, RIGID AND D-STYLE CLAMPING, ANGLE 93 TO 95 DEGREE, ISO TURNING INSERT WNMG 080404 FOR STEEL MEDIUM TURNING
Indian Army
Neomycin sulphate polymyxin B Sulphate and hydrocortisone 10 mg ear drops, Epleperone 25 mg Tab, Sitagliptine Phosphate 50 mg plus Metformin 100 mg Tab, Clindamycin 300 mg cap, Deflazacort 12 mg Tab
India Optel Limited
7440209377 MICROCIRCUIT AS PER PART NO. SNJ54ALS374AW, 7440209410 MICROCIRCUIT AS PER PART NO. SNJ54LS123W
Ministry Of Environment Forest And Climate Change
252507120156 Fuel Injection Assy 697CRDIBS4, 252501160140 Fuel Injector BS4 Assy, Semi Automatic Washing Machine 10 Kg, Copper RO Water Purifier 12 L, Pedestal Fan
Indian Air Force
Executive Notebook with SKAT watermark on each page, Official Sqn Print with grame A4 size with wooden frame and matte lamination, Photo frames large size 2X3 ft with wooden frame and matte lamination, SKAT Brouchers, SKAT Postcard, SKAT pamphlets, SKAT Drawing Book, Sqn Memento with wooden frame with metal work, Coffee mugs with SKAT logo, 3D Aircraft shape fridge magnets, Card board Aircraft puzzle coloured, SKAt Car stickers, Click type ball pen with SKAT logo, Metal key chain with embossed team logo, SKAT kids Styrofoam rubber Frisbee, Wooden Leather material pen stand with embossed SKAT logo, Executive Fountain pen with embossed SKAT logo, Lapel pin 3D with embossed SKAT logo, SKAT Jute bag medium with SKAT printed logo and inside plastic coating, SKAT paper bags medium with SKAT printed logo and with golden finish, Stationery pouch with small stationery items like pencil, eraser, sharpener with custom SKAKT design on each item, Small crayon set with customised cover, SKAT customised Tie set with box, SKAT customised bookmarks Bid Number ( ) : GEM/2025/B/6141993 Dated : 22-04-2025 Bid Document 1/23
Eastern Coalfields Limited
Antiwear Hydraulic Oil Heavy Duty (V4) as per IS 10522 (Q2), Antiwear Hydraulic Oil (V3) as per IS 11656 (Q2) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Primary product category Antiwear Hydraulic Oil (V3) as per IS 11656 Bid Number ( ) : GEM/2025/B/6104511 Dated : 22-04-2025 Bid Document 1/8 Time allowed for Technical Clarifications during technical evaluation 7 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 560934.95 Payment Timelines Payments shall be made to the Seller within 21 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Evaluation Method Item wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank ICICI Schedule 1 EMD Amount (In INR) 870 Schedule 2 EMD Amount (In INR) 10400 ePBG Detail Advisory Bank ICICI ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 6 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). The EMD Amount will be applicable for each schedule/group selected during Bid creation. (c). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : 2/8 EASTERN COALFILEDS LIMITED AREA MATERIALS MANAGER Office of the General Manger, Sonepur Bazari Area, ECL P.O.- Bahula, District Paschim -Burdwan, West Bengal- 713322 (Eastern Coalfields Limited) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "
Across all 10,894 tenders published on this date. Statuses reflect the latest available updates; check each tender for its current deadline.
A tender can cover more than one state. Group counts may overlap.