Government Tenders Published on 23 April 2025

Indian Air Force

Enamel, Synthetic, Exterior (A) Under Coating (B) Finishing Paint (V3) Confirming to IS 2932 (Q3), Aluminium Paint for General Purposes in Dual Container as per IS 2339 (Q3) MSE Exemption for Years of Experience and Turnover

Office Of Dg (ace)

Power Grid Corporation Of India Limited

Brahmaputra Valley Fertilizer Corporation Limited (bvfcl)

Office Of Dg ( Med & Cos)

Food Corporation Of India (fci)

Indian Air Force

Indian Air Force

Office Of Dg (mss)

Indian Air Force

Canara Bank

Ntpc Sail Power Company Ltd

Indian Army

Indian Army

Office Of Dg ( Ns & M)

Printing and Supply of Large Size and Non-repetitive Pattern on Fabric (25mx25m: 01 No, 20mx20m: 01 N

Border Security Force (bsf)

fire extingusher abc, fire extingusher foam type, fire extingusher Co2 gas, fire bucket, fire bitter, fire hook, fire machanical ball

Canara Bank

Employees State Insurance Corporation (esic)

Indian Council Of Medical Research (icmr)

Punjab Engineering College (pec)

Bharat Earth Movers Limited (beml)

Chennai Petroleum Corporation Limited

Custom Bid for Services - CPCLY25176 Study of 01-F-03 radiant coil vibration in CPCL, Manali Similar Category Project Management Consultancy (PMC) Service Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

National Aluminium Company Limited, Bhubaneswar

Munitions India Limited

Silica Gel as per IS 3401 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6159428 Dated : 23-04-2025 Bid Document 1/7 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 60 Evaluation Method Total value wise evaluation Arbitration Clause Yes ( Arbitration clause document ) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 Arbitration should not be routinely included in contracts Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are 2/7 not eligible to participate. However, eligible micro and small enterprises will be allowed to participate.The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Inspection of Stores by Nominated Inspection Authority/Agency of buyer or their authorized representatives An independent third party Professional Inspection Body can help buyer in mitigating buyer’s risk with pre- dispatch/post-dispatch inspection in order to ensure that equipment, components, solutions and documentation conform to contractual requirements. The buyer has a right to inspect goods in reasonable manner and within reasonable time at any reasonable place as indicated in contract. Inspection Fee/Charges (as pre-greed between buyer and Inspection Agency) would be borne by the buyer as per their internal arrangement but may be recovered from the seller if the consignment failed to conform to contractual specification and got rejected by the Inspection Officer .If so requested and accepted by the seller, initially seller may pay for inspection charges as applicable and get the same reimbursed from buyer if consignment accepted by the Inspecting Officer . For reimbursement seller has to submit proof of payment to Inspection Agency. Seller/OEM shall send a notice in writing/e-mail to the Inspecting officer/inspection agency specifying the place of inspection as per contract and the Inspecting officer shall on receipt of such notice notify to the seller the date and time when the stores would be inspected. The seller shall, at his own expenses, afford to the Inspecting officer, all reasonable facilities as may be necessary for satisfying himself that the stores are being and or have been manufactured in accordance with the technical particulars governing the supply. The decision of the purchaser representative/inspection authority regarding acceptance/rejection of consignment shall be final and binding on the seller. The Seller shall provide, without any extra charge, all materials, tools, labour and assistance of every kind which the Inspecting officer may demand of him for any test, and examination, other than special or independent test, which he shall require to be made on the seller's premises and the seller shall bear and pay all costs attendant thereon. The seller shall also provide and deliver store/sample from consignment under inspection free of charge at any such place other than his premises as the Inspecting officer may specify for acceptance tests for which seller/OEM does not have the facilities or for special/independent tests. In the event of rejection of stores or any part thereof by the Inspecting officer basis testing outside owing to lack of test facility at sellers premises, the seller shall, on demand, pay to the buyer the costs incurred in the inspection and/or test. Cost of test shall be assessed at the rate charged by the Laboratory to private persons for similar work. Inspector shall have the right to put all the stores or materials forming part of the same or any part thereof to such tests as he may like fit and proper as per QAP/governing specification. The seller shall not be entitled to object on any ground whatsoever to the method of testing adopted by the Inspecting officer. Unless otherwise provided for in the contract, the quantity of the stores or materials expended in test will be borne by seller. Inspecting officer is the Final Authority to Certify Performance/accept the consignment. The Inspecting 3/7 officer’s decision as regards the rejection shall be final and binding on the seller. The seller shall if so required at his own expense shall mark or permit the Inspecting officer to mark all the approved stores with a recognised Government or purchaser's mark. 4. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However, H-1 will also be allowed to participate in RA in following cases: i . If number of technically qualified bidders are only 2 or 3. ii . If Buyer has chosen to split the bid amongst N sellers, and H1 bid is coming within N. iii . In case Primary product of only one OEM is left in contention for participation in RA on elimination of H-1. iv . If L-1 is non-MSE and H-1 is eligible MSE and H-1 price is coming within price band of 15% of Non-MSE L-1 v . If L-1 is non-MII and H-1 is eligible MII and H-1 price is coming within price band of 20% of Non-MII L-1 Silica Gel As Per IS 3401 ( 876 pieces ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) GENERIC ISI Marked Yes, No Type of silica gel Indicating Colour of silica gel Blue Particle size (in mm ) 2 to 4 Bulk density (in g/litre) 600 to 700 Type of air tight container for packing of silica gel HDPE Quantity in each container (in Kg) 0.5 Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 *********** ***********HOSHANGABAD 876 30 Special terms and conditions-Version:2 effective from 16-01-2025 for category Silica Gel as per IS 3401 4/7 1 . The product may also carry an ISI Mark/Standard Mark as per the BIS standard governing this category. As such Buyers may also opt for ISI marked product while creating BID. In such cases buyer shall verify valid BIS License for the same at the time of evaluation of BID and check ISI marking at the time of receipt of material before issuing CRAC. Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms. 2 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses Item Nomenclature- Indicating Type Silica Gel Dessicant silica to specn GFL-IS-3401-1992 3RD REV. REAFF 2020 in white CL bag of size 30x70 MM containing 10 Gram s of silica gel of particle size 1.5+/-0.5 MM (Approx)

Indian Army

K5 7330 000236 MEASURE CYLINDRICAL POURING TYPE 1 LTR, K5 7330 000230 MEASURE CONICAL 1 LTRS, K5 8465 000938 SCABARD DAH, K5 6670 000037 1 WEIGHT CAST IRON OR FORGED MILD STEEL 2 KG, K5 3740 000085 SPRAYER INSECTICIDE MANUALLY CARRIED, K5 6670 000025 WEIGHT CAST IRON OR FORGED 100 GMS, K5 6670 000158 WEIGHT BRASS FLAT CYLENDRICAL BULL 10 GMS, K6 7350 000194 MUG SS WITH DOUBLE WALL MOULDED HANDLE

Munitions India Limited

Power Grid Corporation Of India Limited

Central Warehousing Corporation (cwc)

Rate of Supply of 60 MT ELWB, Rate of Erection of 60 MT ELWB, Rate of Installation of 60 MT ELWB, Rate of Civil work, Rate of Calibration and stamping of ELWB

Howrah Municipal Corporation

Indian Army

16 Amp Socket Combination, 6 Amp Socket with Combination, Angle Holder, Cable 10 Sq mm 2 Core, Cable 2 Core 16 Sq mm, Cable PVC 1.5 Sq mm, Cable PVC 2.5 Sq MM, Casing Caping 3 Mtr, Change Lever 100 Amp, Change Lever 63 Amp, Exhuast Fan 300 x 300 mm, Flexible Wire PVC Twin Core, Insulation Tape, LED Bulb 9 W, LED Bulb 15 W, LED Tube Light 4 feet, MCB 2 Pole 32 Amp, MCB 6 Amp, MS Screw 20 mm Per Pkt100 Nos, Security Light 25 W, Security Light 60 W, Wall Mounting Fan 450mm, Switch piano 6 amps, Modular Switch 16 Amp, Plug 3 Pin 6 Amp, CP Bib Cock 15 mm, CP Bib Cock 20 mm, Door Handle, Foot Valve 20mm, GI Gate Wall 25 inch, GI Gate Wall 15 mm, GI Elbow 15 mm, GI Nipple 15 mm, GI Pipe 40 mm Dia 6 mtr Long, GI Socket 15 mm, GI Socket 25 mm, GI Union 1 inch, Gyser Element, M Seal 100gm each Pkt, GI Pipe 15 mm Dia 6 mtr Long, PPR Pipe 25 mm, PPR Pipe 15 mm, PPR tee 15 mm, Flexible Pipe, PPR socket 15 mm, PPR union 15 mm, PPR Elbow 15 mm, PVC Connecting Pipe, PVC Pipe 3 inch, PVC Pipe 4 inch, L Bend 4 inch, T bend 3 inch, T Bend 4 inch, Tank Nipple 20 mm, Union 15 mm, Urinal Pot, Wash Basin, Water Storage Tank 500Ltr, Water Storage Tank 200 Ltrs, Water Tank 1000 Ltr, WC Indian Style, PVC Cistern 10 Ltrs, White Cement, GI Tee 25mm, Looking Mirror, Soap Tray, Stop Cock 15 mm, Towel Ring, Wall Hunger, Aluminium Strip, Teflon tape, Back Filling Compound, Paint Black, Salt, CGI Sheet 8 feet Long, CGI Sheet 10 feet Long, CGI Sheet 6ft, Fevicol 500 Gm, Fire retardant paint, HDPE Sand Bag, Hinges 4 inch, Iron Cutting Blade, Ceramic Wash hand basin with pedastal with coupling waste pipe, LDPE Sheet, Lightning air terminal, Nails 2 inch, Nails 2 inch 3 inch 4 inch 6 inch, Nails 4 inch, Nails 6 inch, Paint OG, Oil Bound Distemper, Out bond distemper, Paint Green, Paint Brush 4 inch, PBS Roll, Plywood 8 feet x4 feet x12mm, Plywood 6 feet x3 feet x 6mm, Rapidite quick setting, Paint Red, Sand, Sliding Bolt, SRT, Tapping Screw 1 inch, Tapping Screw 2 inch, Tapping Screw 4 inch, Tapping Screw 6 Inch, Tile Cutter Machine, Tiles Cutting Blade, Tower Bolt, White Paint, Acrylic sheet 4 feet x 3 feet, Acrylic sheet 4 feet x 6 feet x 4mm, Concetrina Coil, Cylender Slive, Barbed Wire, Binding Wire, Long Angle Iron Picket 6 feet long, Long Angle Iron Picket 10 feet long, LC NC, Paint Brown, Tiles 600 mm x 600 mm, Nylone Rope 16mm, Plastic Chair, Plastic Table, Paint Yellow, HDPE Pipe 25 mm Black Colour, Fire Extinguisher 2 Ltr, Clamp 40mm, Y Arms, WRM Rope, Wicks for kero heater, Aggregate 20mm Graded, Aggregate 40mm Graded

Indian Army

less than 0.9 dia, Synthetic Enamel Paint Yellow, Synthetic Enamel Paint Blue, Door closer, Silicon Tube, PVC pipe 3 m long 6 inch, UPVC Pipe 15mm dia single socket, PVC Socket 15 or 20 or 25mm, PVC T 15mm, PVC Elbow 15mm, PVC Union 15 obliq 20mm, GI Elbow 15mm, Shop case steel, SS Hanger, Looking Mirror, PPR male threaded elbow outer dia 32mm, PPR tank nipple 15 obliq 20mm, ISMB 150mm x 75mm BR, ISMB 150mm x 75mm BR1, ISMB 150mm x 75mm TR, ISMB 150mm x 75mm TR1, ISMB 150mm x 75mm 3m long, ISMB 250mm x 125mm 2.95m long, ISMC 75 x 40mm RC, ISMC 75mm x 40mm 3.00m long, ISMC 75mm x 40mm and 3.00m long, Glass Dividing strips 35mm x 3mm thick, HDPE sand Bag laminated of size 75 x 40 cm Sand colour and each bag having weight not less than 60gms, Acrylic Sheet 6 feet x4 feet x4mm, Plywood 6mm, Glass oily putty, HDPE Pipe 25mm, Taflon Tape, CP Stock Cock 15mm, PVC Conneciton pipe 600 mm, Tiles 1x1 Pkt, Hook for curtain Rod, HDPE Pipe 15mm, L Bow 25mm, T HDPE 15mm, T HDPE 25mm, Union 25mm, Float Valve 15 obliq 20 or 25mm, Door Handle, Fabircated Angle Iron 65x65x6 9 feet long Sturt Piquit, Gun Metal Gate Valve 15 obliq 20mm, Gun Metal Gate Valve 40mm, Vitreous European WC., Waste Pipe for Wash Basin, Wastage pipe for urinal pot, Waste Bin 120 Ltr, Thinner, M Seal 100gm, Snow White Colour WC, Kitchen Sink Coupling, PVC Pipe 15 obliq 25mm Dia, PVC Stop Cock 20mm, Towel Rail, CGI Sheet 810 x 3660mm long 0.63 thick, Acrylic sheet 4 feet x3 feet x3mm, Nail 1.5 inch long, Nail 1 inch long, 20mm Equal tee suitable, 20mm Union suittable, Chair Plastic, Water tank 1000 Ltr, HDPE Jerricane 40 Ltrs, Flush System, GI Pipe 15mm, GI Pipe 20mm, GI Socket 15mm, GI Socket 20mm, GI Nipple 4 inch 15mm, PVC Bend 3 dia, Bulk Cat Head, J Hook Large, Aluminums Strip, Barbed Wire, Rotational moulded polythene water storage tank double layer cylindrical vertical tank as per IS 12701 of 1996 500ltrs capacity, Acrylic sheet 6 feet x4 feet x4mm, HDPE 200 GSMN Heavy duty plastic Tarpauline, Tarpauline Plastic 30x20, Anti Skid Tiles 1 feet x1 feet, Tera Cota Red, Tera Cota Yellow, Vitreous European WC, Fire Extinguisher 2 Kg, PVC Bib Cock 20mm, Ball brass float valve 20mm, Earthing pipe, White Cement, Punched Tape Concertina Coil with 50 turns and dia 1050 mm in Coil, Composite multi layer pipe 25 obliq 32mm each roll 100 mtr, Plywood 8 feet x 4 feet x 12 mm, Natural sand confirming to IS 383 1970 Specifications for coarse and fine aggregates., Aggregate 10 to 12.50 mm Stone Aggregate to be crushed rock or gravel 12.50mm

Irel (india) Limited

Lubricating Grease (Q3) MSE Exemption for Turnover Yes Startup Exemption for Turnover Yes Document required from seller Bidder Turnover, Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No ITC available to buyer Yes Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6154584 Dated : 23-04-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 79579 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Indian Army

Hindustan Aeronautics Limited (hal)

National Aluminium Company Limited, Bhubaneswar

JOURNAL SPRING BEARING STUD WITH FOR XRP803, JOURNAL SPRING BEARING STUD WITH SEAT FOR XRP763

Armoured Vehicles Nigam Limited

Indian Army

CN 8465 000804 CAPS KNEE, F1 5210 000141 GAUGES THICKNESS FEELER TYPE 100 MM, F1 5120 003045 CRANKED D E RIG SPANNER 12 X 13, F1 5120 001962 SPANNER TUBULAR BOX DOUBLE ENDED AMERIC, F1 5120 003048 SPANNER RING CRACKED DOUBLE ENDED STEEL, F1 5120 000184 GUAGES METAL SHEET AND HOOP 0-26 BG, G1 5305 002538 SCREWS WOOD SLOTTED COUNTERSUNK HEAD BRA

Visvesvaraya Iron And Steel Plant

India Optel Limited

9912238286, 9912238287, 9912238288, 9912238289, 9912238290, 9912238291, 9912238292

Ai Airport Services Limited

E-municipalities - Eservices To Citizens And Employees Of

Uttar Pradesh Metro Rail Corporation Limited

Indian Bank

Munitions India Limited

Bharat Heavy Electricals Limited (bhel)

Indian Air Force

Department Of Atomic Energy

Supply of Elmo Luft 1AGolden fast drying insulating varnish, Supply of high performance high temperature grease, Supply of capacitors capacity 2.5F, Supply of capacitors capacity 4.0F, Supply of sturdy durable male female 2 pin sockets, Supply of 3pin plug tops current rating 6 Amp, Supply of 3pin plug tops current rating 16 Amp, Supply of T8 snap in pin holder, Supply of enamel coated copper winding wire, Supply of lithium ion battery, Supply of heavy duty single compression cable glands, Supply of heavy-duty single compression cable glands, Supply of heavy duty single compression cable glands with checknut, Supply of tin plated copper lugs heavy duty reducer terminal, Supply of SS screw, Supply of aluminium blind pop rivet for Riveter, supply of aluminium blind pop rivet for Riveter

Kolhapur District Panchayats

Indian Navy

Office Of Dg (mss)

Glue Stick (V2) (Q4), Desktop Calculator - Electronics (Q4), Register (V2) (Q4), Tags for Files (V2) as per IS 8499 (Q4), Waste Containers and Accessories - Domestic (V2) (Q3), Metric Steel Scales (V2) as per IS 1481 (Q4), Labels Stickers (V2) (Q4), Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Primary product category Glue Stick (V2) Bid Number ( ) : GEM/2025/B/6159003 Dated : 23-04-2025 Bid Document 1/14 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 30 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "