Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
6,878 live and archived tenders were published on this date.
Adding a sidebar filter continues in Live Tenders while preserving this publication date.
6,878 results • Latest
Damodar Valley Corporation
Spring Loaded Power Cylinder 6 inch Bore x 178mm Stroke, Double Acting Cylinder non cushioned with rear pivot D mounting. Piston Rod dia 38 point 1 mm., Power Cylinder, 6inch Bore x 10 inch Stroke, Double Acting Cylinder non cushioned with rear pivot D mounting., Power Cylinder, 76 point 2 mm Bore x 75 mm stroke, Front Mounting., Power Cylinder, 2 point 5 inch Bore x 102mm Stroke, Double acting cylinder non cushioned with rear pivot D mounting., Power Cylinder, 4 inch Bore x178mm Stroke, Double Acting non cushioned with rear pivot D mounting., Spring for the power cylinder Cylinder ZRM-960-178-D-S-PL- 6 inch Bore x178mm Stroke., SPRING FOR AIR CYLINDER FOR FLY ASH DIFFUSER INTAKE Valve FOR FLY ASH SYSTEM, 100 mm Bore x 127mmStroke, DoubleActing Cylindernon cushionedwith rear pivot D mounting., Bucket-Piston for the cylinder 6inch bore X 8 point 9 inch stroke rear pivot mounting, Materials - Steel re-inforced Nitrile Rubber., Kit ZQRM-960-00 Seal kit for Cylinder ZRM-960-178-D-SPL-6Bore x178mm Stroke D. A Cylinder non cushioned with Rear PIVOT D MTG, Material Nitrile Rubber., Kit ZQRM-940-00 Seal Kit for Cylinder ZRM- 940-178-D-SPL 4Bore x 178 mm Stroke D. A Cylinder Non Cushioned With Rear pivot D MTG. Material Nitrile Rubber., Kit Seal Kit ZRM-940-00-SPL for Power Cylinder ZRM-940- 127-D-SPL, Material-Nitrile Rubber Bid Number ( ) : GEM/2025/B/6152431 Dated : 26-04-2025 Bid Document 1/20
Nmdc Steel Limited
SLEE, PUMP WATE WILO 150 200 DST A SPACER SLE, PUMP WATE WILO 150 200 DST A THRUST COL, PUMP WATE WILO 150 200 DST A S NUT L.H, PUMP WATE WILO 150 200 DST A S NUT R.H, PUMP WATE WILO 8 10 CME TA NECK RING, PUMP WATE WILO 8 10 CME TA IMPELLER, PUMP WATE WILO 8 10 CME TA SHAFT, PUMP WATE WILO 8 10 CME TA SHAFT SLEE, PUMP WATE WILO 8 10 CME TA SPACER SLE, PUMP WATE WILO 8 10 CME TA THRUST COL, PUMP WATE WILO 8 10 CME TA S NUT L.H, PUMP WATE WILO 8 10 CME TA S NUT R.H, PUMP WATE WILO 14 18 EME NECK RING, PUMP WATE WILO 14 18 EME IMPELLER, PUMP WATE WILO 14 18 EME SHAFT, PUMP WATE WILO 14 18 EME SHAFT SLEE, PUMP WATE WILO 14 18 EME SPACER SLE, PUMP WATE WILO 14 18 EME THRUST COL, PUMP WATE WILO 14 18 EME S NUT L.H, PUMP WATE WILO 14 18 EME S NUT R.H, PUMP WATE WILO SCP 200 360 HB NECK RING, PUMP WATE WILO SCP 200 360 HB IMPELLER, PUMP WATE WILO SCP 200 360 HB SHAFT, PUMP WATE WILO SCP 200 360 HB SHAFT SLEE, PUMP WATE WILO SCP 200 360 HB SPACER SLE, PUMP WATE WILO SCP 200 360 HB THRUST COL, PUMP WATE WILO SCP 200 360 HB S NUT L.H, PUMP WATE WILO SCP 200 360 HB S NUT R.H, PUMP WATE WILO SCP 300 660 DV NECK RING, PUMP WATE WILO SCP 300 660 DV IMPELLER, PUMP WATE WILO SCP 300 660 DV SHAFT, PUMP WATE WILO SCP 300 660 DV SHAFT SLEE, PUMP WATE WILO SCP 300 660 DV SPACER SLE, PUMP WATE WILO SCP 300 660 DV THRUST COL, PUMP WATE WILO SCP 300 660 DV S NUT L.H, PUMP WATE WILO SCP 300 660 DV S NUT R.H, PUMP WATE WILO 18 20 IMPELLER, PUMP WATE WILO 18 20 NECK RING, PUMP WATE WILO 18 20 SHAFT, PUMP WATE WILO 18 20 SHAFT SLEE, PUMP WATE WILO 18 20 LANTERN RI, PUMP WATE WILO 18 20 THRUST COL, PUMP WATE WILO 18 20 COWL NUT L, PUMP WATE WILO 18 20 COWL NUT R, PUMP WATE WILO 18 20 SLEEVE NUT, PUMP WATE WILO 18 20 SLEEVE N R
Nuclear Power Corporation Of India Limited
Supply of air cooled floor mounted package air conditioner having cooling capacity Q -48 KW min air flow rate 11000 CMH min and pressure head 400 Pa min as per attached technical specification, Supply of air cooled floor mounted package air conditioner having cooling capacity Q-24.3 KW min air flow rate 4080 CMH min as per attached technical specification, Supply of air cooled floor mounted package air conditioner having cooling capacity Q-32 KW min air flow rate 7000 CMH min and pressure head 600 Pa min as per attached technical specification, Supply of air cooled floor mounted package air conditioner having cooling capacity Q- 10.92 KW min air flow rate 6300 CMH min and pressure head 600 Pa min as per attached technical specification, Supply of air cooled floor mounted package air conditioner having cooling capacity Q-16 KW min air flow rate 4000 CMH min and pressure head 400 Pa min as per attached technical specification, Supply of air cooled floor mounted package air conditioner having cooling capacity Q-45 KW min air flow rate 9000 CMH min and pressure head 500 Pa min as per attached technical specification, Supply of ceiling mounted ductable IDU unit of cooling capacity 3 TR air cooled including additional 5 meter copper tube length liquid, Supply of Split system with suspended sub ceiling IDU of cooling capacity 4 TR min air cooled ODU unit including additional 5 meter copper tube length liquid
Andrew Yule And Company Limited
ZERO SPEED SWITCH WITH CONTROLLER, FOR 2240 MM DIA. DI. BAB-42 COMBUSTION AIR FAN, COMPLTE IN ALL RESP
Iocl- Digboi Refinery
CRM FOR SULPHUR - HSD MATRIX, CRM FOR SULPHUR - MS MATRIX, NITROGEN CRM SET, CRM FOR FLASH POINT ABEL STD., CRM FOR FLASH POINT PMCC STD., CRM FOR POUR POINT STD., DISTILLATION CRM - METHOD ASTM D 86, IP123, CRM FOR CFPP STD., SULFUR CRM SET FOR SKO BLANK TO 1000 PPM, CRM FOR SULPHUR - RFO MATRIX, CRM F TOTAL ACID NUMBER, 1.0 MG KOH G, CRM FOR LEAD STD. FOR OILS, CRM FOR PHENOL STD., PAH STANDARD MIX SUPELCO CAT NO. 502065, CRM CHLORINE SD. IN TOL, 5 PPM, CRM FOR VISCOSITY
Nlc India Limited
12Kv, 630A, 350MVA Vacuum Circuit Breaker
Gail India Limited
LED FLOOD LIGHT FIXTURE 150W, LED WP FLOOD LIGHTFITTING 120W, FLOOD LIGHT LED FITTING WP 100 W, LED TUBE LIGHT 2FT 9W to 10W, LED FLOOD LIGHT FITTING 200W 240V AC, LED STREET LIGHT FIXTURE 90W, LED LIGHT FITTING 42W FLAT 2ft x 2ft, LED TUBE LIGHT 4FEET 20 to 22W, LED POST TOP LANTERN FIXTURE 15W, LED BULB 15W E27 Base 6500K, 90W LED DRIVER, 100W LED DRIVER, 200W LED DRIVER, 120W LED DRIVER
Hindustan Copper Limited
094700005 ALUMINIUM ALLOY GRIPPER 1 INCH FOR, 094700003 ALU, ALLOY GRIPPER FOR ACSR, 094700023 CLAMP PG.FOR ACSR GOAT 3 BOLT, 091900016 G.I.STAY ROD 5 BY 8 INCH WITH EARTHING, 091900026 G.I.STAY WIRE 7 BY 10, 096900115 G.I.STAY WIRE 7 BY 16, 093200226 PORE INSULATOR SHACKLE
Indo Tibetan Border Police (itbp)
ARBI, BRINJAL, LOKI BOTTLE GOURD, CAULIFLOWER, BEANS SHIM FARSVIN, CABBAGE, TOMATO, SPINACH GREEN RED FENUGREEK LEAVES HARA SAG, HARA DHANIYA CORIANDER GREEN, GREEN CHILLI, CUCUMBER KHIRA, LADYS FINGER, GREEN PEAS HARA MUTTER, HARA MUTTER PACKED DANA, RADISH, KARELA BITTER GUARD, SHIMLA MIRCH CAPSICUM, PUMKIN KADDU GREEN, LEMON FRESH, BEETROOT CHUKANDER, PARWAL, CARROT GAJAR, TORI, JACK FRUIT KATHAL, SNAKE GOURD CHACHINDA, MUSHROOM FRESH, GINGER ADRAK, BROCCOLI, POTATO, ONION, GARLIC LAHSUN, APPLE ROYAL, LITCHI, BANANA MEDIUM SIZE, AMROOD GUAVA, ANNANAS PINEAPPLE, MANGO MEDIUM SIZE, ORANGE MEDIUM SIZE, GRAPES, ANNAR POMEGRANATE, PAPAYA, MOUSAMBI, KINNU, NASPATI, KIWI
Indo Tibetan Border Police (itbp)
CHICKEN LIVE BROILER, MOH LIVE BAKRA, FISH ROHU, FISH KATLA, EGG FRESH
Indo Tibetan Border Police (itbp)
MILK TPM NANDINI GOLD, MILK TPM NANDINI TONED, MILK TPM AMUL TAZA, MILK TPM AMUL GOLD, MILK TPM VERKA
Bharat Heavy Electricals Limited (bhel)
W90414907353 REFERIGERATION GAS DRIER WITH SS HEAT EXCHANGER SPEC: TG60327 REV: 15, W90414907175 DRG: . REV: 00 COMMISSIONING OF REF. GAS DRIER
Northern Coalfields Limited
BOLT CARRIAGE, Part No.1B2709, PLATFORM AS, Part No.4259815, STUD TAPERLOCK, Part No.5P6603, STUD, Part No.4D6578, CASE AS TRANSMISSION, Part No.3636848, EXTENSION AS VALVE, Part No.3564135, SUPPORT STEP RUBBER, Part No.4259816, SLEEVE, Part No.2153579, RIM AS, Part No.1379862, HOSE AS, Part No.2301132, RING, Part No.3557731, BOLT, Part No.8X2560
Hmt Machine Tools Limited
ELECTRO MAGNETIC CHUCK 250 X 1500, A, B, C, D
Nmdc Limited
1700006208, 5.5KW LT MOTOR, 1600036256, 45KW LT MOTOR, 1600045462, 55KW LT MOTOR, 1600045466, 110KW LT MOTOR
Nmdc Limited
DIRECT OPTHALMOSCOPE WITH RECHARGEABLE BATTERY (HANDLE), INDIRECT WIRELESS OPTHALMOSCOPE
Bharat Heavy Electricals Limited (bhel)
JOURNAL SHAFT (HY-312. A. 01) - ROUGH M/CD FORGING AS PER DRG. 36100090173/01 WITH MATL AS PER SPECN., UPPER JOURNAL HOUSING (HY-902.03. F) - ROUGH M/CD FORGING AS PER DRG. NO. 36108802393/01 WITH MATL A
Damodar Valley Corporation
Complete seal kit for pneumatic cylinder Bore: 152 mm Stroke: 170 mm. MOC: Nitrile Rubber, Seal kit of Pneumatic Cylinder for Vent Valve in FAE Tower, Make: - McNally Bharat Engineering Company, Complete seal kit for pneumatic cylinder Bore: 215 mm Stroke: 220 mm. MOC: Nitrile Rubber, Flexible Tube, Material: Polyerethan (PU) ; OD: 08MM X ID: 05MM, Neck Seal of pneumatic cylinder. OD: 47 mm ID: 38 mm. MOC: Nitrile Rubber, Push type male connector 1/2" NPT(m) x 8 mm PU Tube
Western Coalfields Limited
GLV ELEC HND 33KV, GLV HND 8IN RBR, GLV ELEC HND RBR 18IN 11KV, GLV ELEC HND RBR 3 3KV IN NUMBER, GLV ELEC HND 1 1KV
Indian Army
Endodontic access diamond burs, Lubricant oil spray for airotor handpiece bott of 330ml, Inj Lignocaine vial of 30ml without adrenaline, Inj Lignocaine cartridge 1 point 8 ml pkt of 50, Single bond universal bonding agent bott of 05 ml, U Shaped patient resuables drape, Posterior composite material syringe of 04 gm, Miracle mix pack of 15 g powder and 17g alloy and 8ml liquid mixing pad sponn, Lignocaine topical spray bott of 100g, Surgical face mask disposable with 3ply layer pkt of 100, Desensitizing agent bott of 5ml
Nlc India Limited
CARBON BRUSH SET FOR KPT MAKE SIREN KIS 6, SIREN COVER FOR KPT MAKE SIREN KIS 6
National Seeds Corporation Limited (nsc)
Bharat Heavy Electricals Limited (bhel)
Steel Bars Grade 26NiCrMoV14-5, Spec- HW18813 Rev: 01, Dia- 56 mm, Steel Bars Grade 26NiCrMoV14-5, Spec- HW18813 Rev: 01, Dia- 100 mm
Iti Limited
DD9PC010002NSD2, DD9PP010002NSD2, DC4C1301028A1A1, DD9A5010022A1A1, DMEP100010002NS
Iti Limited
DD9M117010101NS, DD9M117020202NS, DD9A5010021A1A1, DC9A1120069A6NS, DC9C1000002NSNS
Directorate Of Health Services Kashmir
Planning And Development Department
Nmdc Limited
Inch, 2100018803 Chain Wrench 6 Inch, 2100000037 WRENCH CHAIN 12IN, 2100005743 WRENCH CHAIN PIPE 1250MM, 2100000546 Circlip Plier 25mm X 130mm lg TIP 1point5mm, 2100016836 PLIER CIRCLIP STRAIGHT NOSE 150 MM, 2100016831 PLIER CIRCLIP STRAIGHT NOSE 230 MM, 2100001059 EXT CIRCLIP PLIER 12 Inch, 2100001106 CIRCLIP PLIERS 8 Inch EXTERNAL CIRCLIP, 2100001058 INT CIRCLIP PLIER 12 Inch, 2100001105 CIRCLIP PLIERS 8 Inch INTERNAL CIRCLIP, 1600195491 SPANNER COMBINATION SPANNER 6 7 8 9 10, 2100016624 CROW BAR OCTAGONAL 25X1650MM, 2100016623 CROW BAR OCTAGONAL 32X1650MM, 2100000078 CUTTING PLIER 150MM, 2100001109 CUTTING PLIER 8 Inch SIZE W PVC INSULATOR, 2100018649 DE Spanner 1point1by16 Inch 1point1by8 Inch and 1point1by4 Inch, 2100018650 DE Spanner 1point1by2 Inch X 1point3by8 Inch, 2100000638 DE SPANNER 16X17, 2100000966 DE SPANNER 18by19MM, 2100018648 DE Spanner 21X23, 2100001014 DE SPANNER 24 X 26, 2100000636 DE SPANNER 25X28, 2100001015 DE SPANNER 30 X 32, 2100000995 DE RING SPANNER 36 X 41, 2100001016 DE SPANNER 46 X50, 2100001049 DE RING SPANER 55X60, 2100000943 DE SPANNER 1X5by16dash5by16X1by4, 2100000595 DE SPANNER SET 6MM TO 32MM, 2100017061 FEELER GAUGE 0point01 dash 3point0MM, 2100000076 BLADE HACKSAW 1BY2X12IN, 2100001538 HACKSAW FRAME 12 INCH, 2100018653 Hand air grinder, 2100000681 CI Heavy Duty Pipe Wrench 55mmX300mm lg, 2100016641 WRENCH HEAVY dash DUTY PIPE W LENGTH dash 600 MM, 2100000990 HYDROMETER, 2100018802 Sockets 1 by2 Inch Drive 12 Point 10mm, 2100000388 MONKEY PLIER, 2100000468 Digital Multimeter 0dash600VAC 3 1by2 digit, 2100000648 NOSE PLIER 6 Inch, 2100001036 NOSE PLIER 8 Inch, 2100000404 PIPE WRENCH 12 Inch, 2100000405 PIPE WRENCH 24 Inch LENGTH, 2100000647 PIPE WRENCH 36 Inch, 2100000553 Pipe Wrench max op dash 55mm X 300 mm lg, 2100016946 PLIER BENT NOSE 200 MM, 2100001359 PLIER LONG NOSE 170 MM, 2100015968 PLIER LONG NOSE 280MM, 2100001030 PLIER LONG NOSE 6 Inch, 2100000970 RATCHET 1 Inch SQ DRIVE, 2100000945 RATCHET 3by4 Inch, 2100001542 RATCHET HANDLE 1by2 Inch SQ DRIVE REVERS, 2100001543 RATCHET HANDLE 3by4 Inch SQ DRIVE REVERS, 2100018651 Ring Spanner 1point1by16 Inch and 1point1by8 Inch and 1point1by4 Inch, 2100000968 DE RING SPANNER 1 dash 1 by2 Inch X1 dash 3by8 Inch, 2100000971 RING SPANNER 16 dash 17MM, 2100000972 RING SPANNER 18X19MM, 2100000065 SPANNER RING 21by23MM, 2100000973 RING SPANNER 24X26MM, 2100000096 SPANNER RING 25by28MM, 2100001019 RING SPANNER 30X32 MM, 2100018801 Sockets set 1by2 Inch Drive Set 5by16 dash 1 dash 1by4 Inch, 2100018800 Sockets set 10 dash 32mm 1by2 Inch Drive Set, 2100000643 DE CLOSED RING TYPE SPANNER SET 1by4 Inch TO 1, 2100015785 SPANNER RING 36X41, 2100006679 SPANNER BIHEXAGON RING 46X50 MM, 2100001048 DE RING SPANNER 50X55, 2100001480 RING SPANNER SET 12PCS 6TO32MM HD CHROME, 2100000947 ROUND FILE SMOOTH 10 Inch, 2100001597 ROUND SMOOTH FILE 6 Inch, 2100001598 ROUND SMOOTH FILE 8 Inch, 2100005582 SCREW DRIVER FLAT TIP 10X1point5 300MM, 2100005580 SCREW DRIVER FLAT TIP 13X1point9 450MM, 2100005808 SCREW DRIVER FLAT TIP 4X0point6 100MM, 2100005805 SCREW DRIVER FLAT TIP 4X0point6 200MM, 2100018810 Screw Driver Philips 150mm, Bid Details 2/145 2100001367 SCREW DRIVER PHILIPS 75MM, 2100000454 Sledge hammer With Wood Handle 1point35kg, 2100001611 SLEDGE HAMMER 12LBS, 2100001334 HAMMER SLEDGE 2 KG, 2100018652 Sledge hammer 6 lbs, 2100000507 Slogging Ring Spanner 36mm, 2100000508 Slogging Ring Spanner 38mm, 2100000509 Slogging Ring Spanner 41mm, 2100000510 Slogging Ring Spanner 46mm, 2100000511 Slogging Ring Spanner 50mm, 2100005918 SPANNER SLOGGING OPEN ENDED 27 MM, 2100005917 SPANNER SLOGGING OPEN ENDED 30 MM, 2100005915 SPANNER SLOGGING OPEN ENDED 34 MM, 2100005914 SPANNER SLOGGING OPEN ENDED 36 MM, 2100005912 SPANNER SLOGGING OPEN ENDED 41 MM, 2100005911 SPANNER SLOGGING OPEN ENDED 46 MM, 2100005910 SPANNER SLOGGING OPEN ENDED 50 MM, 2100001365 SOCKET SET 8 dash 32MM, 1700007086 SOLDERING FLUX EYRET, 1700208615 SOLDERING IRON 450 25W 230 WITH, 1700001181 SOLDERING WIRE LEAD, 2100000146 MEASURING TAPE STEEL 3M, 2100004999 MEASURING TAPE STEEL 5 MTR, 2100000535 Taparia wire stripper 160mm lg, 1700010283 NEON LINE TESTER 240 VAC TAPARIA MAKE, 1700002348 KIT TOOL KIT FOR D REMMY STARTER, 2100016915 Torque wrench 540 dash 1380Nm, 2100018809 Torque Wrench 1Inch Range 1000 dash 2000 Lb Ft, 2100018808 Torque Wrench 1Inch Range 750 dash 1400 Lb Ft, 2100001025 ADJ TORQUE WRENCH 1by2 Inch DRIVE 20 dash 100 LBF, 2100000992 ADJ TORQUE WRENCH 1by2 Inch DRIVE 35 dash 160 LBF, 2100000991 ADJ TORQUE WRENCH 1by2 Inch DRIVE 50 dash 250 LBF, 2100018806 Torque Wrench 3by4 Inch Range 100 dash 500 Lb Ft, 2100018807 Torque Wrench 3by4 Inch Range 350 dash 750 Lb Ft, 2100006112 T HANDLE 1by2 INCHES, 2100001124 T HANDLE WITH 3by4 Inch SQUARE DRIVE, 2100001125 T HANDLE WITH 1 Inch SQUARE DRIVE, 2100001578 ALLEN KEY MM 5, 2100001577 ALLEN KEY MM 6, 2100017560 VICE BENCH 8Inch 8Inch 8Inch 4point01 Inch, 2100001292 BENCH VICE 8 Inch, 2100018799 Bend Ring Spanner 3by4 X5by8, 2100018784 Bottle jack 1Ton SOCKET 1 INCH SQ DRIVE SIZE 32MM, 1 Inch Drive Allen socket 36mm, SOCKET 1 Inch SQ DRIVE SIZE 38MM, SOCKET 1 Inch SQ DRIVE SIZE 41MM, 1 Inch Drive Allen socket 46mm, SOCKET 1 Inch SQ DRIVE SIZE 50MM, 1 Inch Drive Set 12 Point 36mm to 80mm, SOCKET 1 Inch DRIVE SET 7by8 Inch 2 Inch, ALLEN SOCKET 1by2 INCH SQ DRIVE M10, 27 PCS 1by2 SQUARE DRIVE 12 POINT SOCKET, SOCKET 1by2 Inch DRIVE 1by4Inch TO 1 1by4Inch, 3by4Inch Drive Set 6 Point 7by8Inch to 2Inch, 3by4Inch Drive Set 14mm, 3by4Inch Drive Set 22mm, 3by4Inch Drive Set 24mm, SOCKET 32 MM WITH 3by4Inch SQ DRIVE, 36MM 3by4Inch SQ DRIVE HEAVY DUTY SOCKET, SPANNER ADJUSTABLE 250 MM, ADJUSTABLE SPANNER 6Inch, WRENCH ADJUSTABLE 12IN, ADJUSTABLE WRENCH20, ALLEN KEY SET 1by16Inch TO 3by8Inch, Allen Key 1by2Inch, KEY ALLEN 1by4IN, ALLEN KEY SET HEXAGON KEY SIZE 1by8 TO 1, ALLEN KEYS 10MM TO 24 MM, ALLEN KEY MM 12, ALLEN KEY MM 14, Allen Key 3by16 Inch, ALLEN KEY 3by4 Inch, ALLEN KEY MM 3, Allen Key 4point5mm, ALLEN KEY MM 4 MM, Allen Key 5point5mm, HAMMER 0point500, HAMMER 0point800, BENCH VICE 10 INCH, Bottle jack 3Ton, C CLAMP 12 Inch, C CLAMP 4 Inch, Chain Wrench 6 Inch, WRENCH CHAIN 12IN, WRENCH CHAIN PIPE 1250MM, Circlip Plier 25mm X 130mm lg TIP 1point5mm, PLIER CIRCLIP STRAIGHT NOSE 150 MM, PLIER CIRCLIP STRAIGHT NOSE 230 MM, EXT CIRCLIP PLIER 12 Inch, CIRCLIP PLIERS 8 Inch Bid Details 3/145
Bharat Heavy Electricals Limited (bhel)
RU2590092423 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 32002000006 R02 IT002, RU2590092415 SEAL- OFF BUSHING (EPOXY CAST RESIN) DRAWING 32002000006 R02 IT001, RU2590093012 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 45410053474 R07, RU2590092040 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 31241822351 R00 IT001, RU2590092326 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 31001700005 R00 IT-002, RU2590092334 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 31001700005 R00 IT003, RU2590092016 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 31001200006 R00 IT001, RU2590092431 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 32002000006 R02 IT003, RU2590092032 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 31001200006 R00 IT003, RU2590092024 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 31001200006 R00 IT002, RU2590092059 SEAL-OFF BUSHING (EPOXY CAST RESIN) DRAWING 31001200007 R00 IT001
Ntpc Sail Power Company Ltd
M9481300096, M9481300307, M9481300316, M9481306272, M9481306149, M9481306029, M9481300306, M9481300304, M9481306843, M9481300140, M9481307008, M9481306833, M9481306159, M9481300130, M9481300325, M9481300161, M9481300160, M9481306884, M9481300176, M9481306321, M9481300183, M9481306275, M9481300180, M9481306886, M9481306366
Troop Comforts Limited
Hindustan Aeronautics Limited (hal)
1. Plastic Cover With Zip Lock/The Thickness 40 to 80 Microns Material for Plastic Covers: LDPE (Pla, 2. Plastic Zip Lock Covers Material for Plastic Covers: LDPE (Plain/Natural) Size: 8 X 10 Inch, 225, 3. Plastic Covers The Thickness 100 to 120 Microns or 400 to 800 gauge Material for Plastic Covers:, 4. Brown Paper Covers, Size: 150 X150mm Polythene coated heat sealable brown colour paper envelopes m, 5. Stretch Films Size: 500 mm Width (4 to 5.5 Kg/Roll approx| ), 6. Air Bubble Sheet Roll Size: 1.5 M Width X 100 M Length. 200 Gauge, 7. Cello Tape Transparent 2" 65 Meter Length, 8. Plastic Covers Size: 12 Inch (L) X 8 Inch (W), 9. Plastic Covers To be supplied in 1 Kg packing condition Size: 24 Inch (L) X 12 Inch (W), Thickn, 10. Brown Tape (Wonder) 2" 65 Meter Length, 11. HDPE Polythene Sheet 200/250 GSM, Approximate Weight: 13 to 18 Kg per Roll, Roll Size: Width:
Bharat Dynamics Limited
INTERNAL THREADING INSERT 11 IRM 1.0 ISO, INTERNAL THREADING INSERT: 11 IRM 1.5 ISO, EXTERNAL THREADING INSERT: 16 ERM1.0 ISO, EXTERNAL THREADING INSERT: 16 ERM1.25 ISO, EXTERNAL THREADING INSERT: 16 ERM1.50 ISO, EXTERNAL THREADING INSERT: 16ER 2.0 ISO, INTERNAL THREADING INSERT 16IR 2.0 SAGE, INTERNALTHREADING INSERT 16IR 3.0 ISO, EXTERNAL THREADING INSERT 22ER3 ISO, EXTERNAL THREADING INSERT 16 ER 2.0 SAGE, INTERNAL THREADING INSERT 16IR2 ISO, INTERNAL THREADING INSERT 22IR 3.0 SAGE, EXTERNAL THREADING INSERT 22ER3 SAGE
Indian Army
Metformin 500 mg Tab, Linagliptin 2 point 5 mg Tab, Linagliptin 2 point 5 mg plus Metformin 1000 mg Tab, Linagliptin 5 mg plus Metformin 1000 mg Tab, Lisinopril 10 mg Tab, Lisinopril 2 point 5 mg Tab, Loratadine 10 mg Tab, Lorazepam 1 mg Tab, Lorazepam 2 mg Tab, Lornoxicam 8 mg plus Thiocolchicoside 4 mg Tab, Losartan 50 mg plus Hydrochlorothiazide 12 point 5 mg Tab, Losartan 50 mg plus Amlodipine 5 mg Tab, Loteprednol Etabonate 0 point 5 percent eye drop Bott of 5 ml, Terbinafine HCL 1 percent wv lotion in a non aqueous base bott of 20 ml, Luliconazole Cream Tube of 15 gm, Magnesium Oxide 400 mg Tab, Medroxy progesterone 10 mg Tab, Mefenamic Acid 50 mg plus Paracetamol 125 mg Tab, Mefenamic Acid 500 mg Tab, Megestrol Acetate 160 mg Tab, Melatonin 3 mg Tab, Memantine 10 mg Tab, Memantine 5 mg plus Donepezil 5 mg Tab, Memantine 5 mg Tab, Mesalamine 1 gm Sachet, 5 Amino Salicylic Acid 800 mg Tab, Metformin 1 gm Tab, Methotrexate 10 mg Tab, Methotrexate 15mg Tab, Methotrexate 2 point 5mg Tab, Methotrexate 5 mg Tab, Methotrexate 7 point 5mg Tab, METHYLCOBALAMIN 1500MCG ALPHA LIPOIC ACID 100MG MYO INOSITOL 100MG FOLIC ACID 1 point 5MG CHROMIUM PICOLINATE 200MCG SELENIUM 55MCG BENFOTIAMINE 150MG NUHENZ CAP, Methylcobalamine 500 mcg Tab, Methyl prednisolone 16 mg Tab, Methyl prednisolone 4 mg Tab, Methylprednisolone 8mg Tab, Metoclopramide 10 mg Tab, Tab Metolazone 2 point 5mg, Metolazone 5mg Tab, Metoprolol 25 mg Tab, METOPROLOL TARTRATE 100 MG TAB, Metoprolo XL 12 point 5mg, Midodrine Hydrochloride 2 point 5mg, Mirabegron 25mg Tab, Mirabegron 50mg Tab, MIRABEGRON 25MG plus SOLIFENACIN 5MG TAB, Mirtazapine 10 mg Tab, Mirtazapine 15 mg Tab, Mirtazapine 7 point 5 mg Tab, Modafinil 100 mg Tab, Montelukast 10 mg Tab, Montelukast 10 mg plus Desloratidine 5 mg Tab, Moxonidine 0 point 2mg Tab, Moxonidine 0 point 3 mg Tab, NANO CURCUMIN 500 MG TAB, Naproxen 500mg Tab, Calcitonin nasal Spray, Nebivolol 2 point 5mg Tab, Nebivolol 5mg Tab, Carbimazole 10 mg Tab, Nicorandil 5mg Tab, Nifedipine 10 mg Tab, Nifedipine Retard 20 mg tab, Nifedipine XL 30 mg Tab, Nintedanib 100 mg Soft Gelatin Cap, Nintedanib 150 mg Soft Gelatin Capsules, Nitroglycerine 2 point 6 mg Tab, Nitroglycerine 6 point 4mg Tab, Nortriptyline 10 mg Tab, Desogestral 0 point 15 mg plus Estradiol 0 point 3 mg Tab, Eye Drop Ofloxacin 0 point 3 percent Bott of 5 ml, Miconazole 2 percent Tube of 15 gm Cream
Indian Army
mg plus Clonazepam 0point5 mg Tab, Escitalopram 5 mg Tab, Esomeprazole 20 mg Tab, Esomeprazole 40 mg Tab, Clarithromycin 500 mg plus Esomeprazole 40 mg plus Amoxycillin 750 mg Cap, Estradiol Valerate 2mg Tab, Ethambutol 800 mg Tab, Ethamsylate 250 mg Tab, Ethamsylate 500 mg Tab, Etizolam 0point5mg Tab, Etodolac 300 mg Tab, Etodolac 400 mg Tab, Etodolac ER 200 mg Tab, Etophylline BP 77mg and Theophylline IP 23mg Tab, Etoricoxib 120 mg Tab, Etoricoxib 60 mg Tab, Evening Primrose oil 500 mg Cap, Evening Primrose oil 1000 Mg Cap, Ciprofloxacin HCL 0point3percentage Opthalmic Oint Tube of 5 gm, Ezetimibe 10mg Tab, Faropenem 300 mg Tab, Faropenem 200 mg Tab, Febuxostate 80 mg Tab, Fenofibrate 145 mg Tab, Fenofibrate 160 mg Tab, Atorvastatin 10 mg plus Fenofibrate 200 mg Tab, Fentanyl 50 mcg Transdermal Patch, Montelukast 10mg plus Fexofenadine 120mg Tab, Fexofenadine Hydrochloride 120mg Tab, Filgrastim 300 mcg Inj, Finasteride 5 mg Tab, Flecanide 50 mg Tab, Fluconazole 200 mg CapobliqueTab, Fludrocortisone 0point1mg Tab, Fluconazole 50 mg CapobliqueTab, Flunarizine 10mg Tab, Flunarizine 5mg Tab, Fluocinolone Shampoo Bott of 100 ml, Fluoxetine 10 mg Cap, Fluoxetine HCL 20 mg cap, Fluoxetine HCl 60 mg Tab, Flupentixol 0point5 mg plus Melitracen 10 mg Tab, Flupiritine Maleate 100 mg Tab, Fluticasone Furoate 27point5 mcg per dose Nasal Spray Bott of 120 metered doses, Fluticasone propionate cream 0point05percentage Tube of 10 gm, Fluvoxamine 100mg Tab, Fluvoxamine 50 mg Cap, Formoterol 6 mcg plus Glycopyrronium 25 mcg Dry Powder inhaler, Formoterol 12mcg plus Budesonide 400mcg Dry Powder for Inhalation Rotacap, Formoterol 6mcg plus Budesonide 100mcg Dry Powder for Inhalation Rotacap, Formoterol 6mcg plus Budesonide 200mcg Dry Powder for Inhalation Rotacap, Fosfomycin 3 gm Sachet, Frusemide 40 mg Tab, Cream Fusidic Acid 2percentage tube of 10gms, Gabapentin100 mg Tab, Gabapentin 300mg plus Methylcobalamin 500mcg Tab, Gabapentin 300mg plus Methylcobalamin 1500mcg Tab, Gamma Tocotrienol Delta Tocotriennol 400 mg Cap, Gatifloxacin 0point3percentage eye drop Bott of 5 ml, Gefitinib 250mg Tab, Ginkgo Biloba Tab, Glibenclamide 5 mg Tab, Gliclazide MR 30 mg Tab, Gliclazide 40 mg Tab, Gliclazide XR 60 mg plus Metformin XR 500 mg Tab, Gliclazide 80 mg plus Metformin 500 mg Tab, Gliclazide 80mg Tab, Glimepiride 2mg plus Metformin Hydrochloride 500mg Tab, Glimepiride 2mg plus Metformin Hydrochloride 500mg Prolonged Release Tab, Glimepiride 1mg plus Metformin 500mg Tab, Glimepiride 2mg plus Metformin 1000mg Prolonged Release Tab, Glimepiride1mg plus Metformin Hydrochloride 500mg plus Pioglitazone 15mg Tab, Glimepiride 2mg plus Metformin Hydrochloride 500mg Prolonged Release plus Voglibose 0point2mg Tab, Glimepiride 3 mg plus Metformin Hydrochloride 500mg plus Pioglitazone 15mg Tab, Glipizide 5 MG Tab, Glipizide 5mg plus Metformin Hydrochloride 500 Mg Tab, Glucosamine 250 mg plus Chondroitin Sulphate 200 mg Cap, Glucosamine 500mg plus Diacerein 50mg Tab, Glucosamine 500mg plus Chondroitin Sulphate 400mg Tab, Glucosamine 750mg plus Diacerein 50mg Tab, Glucosamine 750mg plus Diacerein 50mg Methyl Sulfonyl Methane 200mg Tab, Dextrose Monohydrate for oral use in Pack of 500 gm with or without Vitamins and Minerals, Glutathione softgel 50mg Tab, Glycerine bott of 100ml, Glycopyrrolate 2 mg Tab, Glycopyrronium 25mcg Respules Bid Details 2/93, Goserelin 3point6 mg Prefilled Syringe Inj, Syp Guiaphenesin ip 100mg plus Dextromethorphan 10mg plus Phenylephrine HCL 5mg Chloropheneramine 4mg each 5ml sugar free, Histidine L Lysine Essential Amino Acids Tab, Isosorbide Dinitrate 20mg plus Hydralazine 37point5mg Tab, Hydrochlorothiazide 12point5mg Tab, Hydrochlorothiazide 25 mg Tab, Hydroxyzine 10mg Tab, Hydroxyzine 25mg Tab, Ibandronate 150mg Tab, Iguratimod 25 mg Tab, Imatinib Mesylate 100 mg cap, Imeglimin 500 mg Tab, Imipramine 25 mg Tab, Indapamide SR 1point5 mg tab, Indomethacin 25 mg cap, Formoterol 6mcg plus Fluticasone 250mcg MDI, Formoterrol 6mcg plus Tiotropium 9mcg 120 Metered Doses MDI, Salmeterol 50 mcg plus Fluticasone 125mcg MDI, Denosumab 60 mg Inj, Diclofenac Sodium 25 mgobliqueml Amp of 3 ml Inj, Dulaglutide 0point75 mg Solution for Inj in Prefilled Pen, Dulaglutide 1point5 mgobliqueml 0point5 ml Inj in prefilled pen, Erythropoeitin Human Recombinant 2000 IU, Erythropoietin Recombinant Human 5000 IU, Erythropoeitin Human Recombinant 6000 IU
Nuclear Power Corporation Of India Limited
thickness- 96 mm x 60 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 95 mm x 50 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 132 mm x 80 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 95 mm x 30 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 77 mm x 40 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 85 mm x 55 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 415 mm x 370 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 86 mm x 50 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 615 mm x 515 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 55 mm x 25 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 33 mm x 10 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 35 mm x 10 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 35 mm x 15 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 45 mm x 28 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 65 mm x 40 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 45 mm x 26 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 56 mm x 38 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 43 mm x 21 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 50 mm x 26 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 70 mm x 45 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 38 mm x 20 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 52 mm x 24 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 46 mm x 24 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 80 mm x 55 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 90 mm x 65 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 52 mm x 30 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 75 mm x 40 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- Size45 mm x 33 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 60 mm x 33 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 80 mm x 40 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 58 mm x 25 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 75 mm x 38 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 52 mm x 26 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 25 mm x 13 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 65 mm x 30 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 58 mm x 30 mm x 3.2 mm., Spiral wound gasket without inner and outer ring. Size -OD x ID x thickness- 39 mm x 16 mm x 3.2 mm. Bid Details 2/42
Indian Army
LV7 MARUTI 09932-66610-01E CARTRIDGE KIT S, LV7 MARUTI 27131-56B00 YOKE JOINT FLANGE, LV7 MARUTI 51000M80900 CYLINDER ASSY MASTER WITH BOOSTER, LV7 MARUTI 31191M85020 LEVER ASSY, LV7 MARUTI 09814M00016 SCREW DRIVER HANDLE
Nuclear Power Corporation Of India Limited
BIRKOSIT Parting Sealing Compound, Linseed Oil Varnish for BIRKOSIT Parting Plane Sealing Compound
Ntpc Sail Power Company Ltd
M1619812251, M1619620287, M1619627321, M1619642430, M1619648465, M1619660520, M1729210152, M1729210301, M1729210505, M1729210806, M1729211003
Kendriya Vidyalaya Sangathan
Indian Army
LV7 STLN 5965-72-0046543 HORN ASSY LOW TONE, LV7 STLN VF 6680-72-0001681 SPEEDOMETER, LV7 HMV-8X8- AL- F7A04800 Oil Filter, LV7 STLN B-9100104 VEHICLE SPEED SENSOR GB, LV7 STLN VF B-7016011 S-A WATER PUMP B-7016007
Nuclear Power Corporation Of India Limited
Toner Cartridges/Ink Cartridges/Consumables for Printers (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Toner Cartridges/Ink Cartridges/Consumables for Printers Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/6160192 Dated : 26-04-2025 Bid Document 1/16 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Item wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes Details of the Competent Authority approval for PAC Competent Authority Approval document for PAC : View Document Name of Competent Authority Ajay Garg Designation of Competent Authority OIC Office/Department/Division of Competent Authority IT, R.R.Site, NPCIL CA Approval Number 99508 Competent Authority Approval Date 2025-04-17 00:00:00 Brief Description of the Approval Granted by Competent Authority Approval for procurement of compatible cartridges for Kyocera make printers. 1. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers 2/16 offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 2. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over, Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. Evaluation Method ( Item Wise Evaluation Method ) Contract will be awarded schedulewise and the determination of L1 will be done separately for each schedule. The details of item-consignee combination covered under each schedule are as under: Evaluation Schedules Item/Category Quantity Schedule 1 Toner Cartridges/Ink Cartridges/Consumables For Printers 20 Schedule 2 Toner Cartridges/Ink Cartridges/Consumables For Printers 5 Schedule 3 Toner Cartridges/Ink Cartridges/Consumables For Printers 5 Schedule 4 Toner Cartridges/Ink Cartridges/Consumables For Printers 5 Toner Cartridges/Ink Cartridges/Consumables For Printers ( 20 pieces ) ( Under PAC ) Make kyocera Model tk-5234kinm5521cdnm5521cdwp5021cdnp5021cdw Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) GENERIC Product Class of Cartridge OEM Name of the OEM/Compatible Manufacturer of Cartridge/Consumable Offered Kyocera Document Solutions India Private Limited Printer/Multifunction Machines Brand for which offered Cartridge/Consumable is Suitable Kyocera 3/16 Type of Cartridge/Consumable Toner Cartridge, Developer Color of the Ink/Toner Black Model Number of OEM's Printer/OEM's Multi Function Machine ECOSYS M5521cdn/P5021cdn, P5021cdw, ECOSYS M5521cdn/P5021cdn/P5021cdw Model Number of OEM's Printer Cartridge/Consumable TK-5234K Model Number of cartridges Consumable offered by compatible manufacturer Not Applicable for Printer OEM Minimum Yield of the Replacement Cartridge/Consumable offered (Number of Pages) 2001 to 5000, 5001 to 10000, 10001 to 15000, 15001 to 20000, 20001 to 30000, 30001 to 40000, 40001 to 50000, 50001 to 70000, 70001 to 100000, 100001 to 500000, 500001 to 1000000, 1000001 to 1500000 Or higher Specification Specification Name Bid Requirement (Allowed Values) Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 20 30 Toner Cartridges/Ink Cartridges/Consumables For Printers ( 5 pieces ) ( Under PAC ) Make kyocera Model tk-5234cusedinm5521cdn5521cdwp5021cdn5021cdw Technical Specifications * As per GeM Category Specification 4/16 Specification Specification Name Bid Requirement (Allowed Values) GENERIC Product Class of Cartridge OEM Name of the OEM/Compatible Manufacturer of Cartridge/Consumable Offered Kyocera Document Solutions India Private Limited Printer/Multifunction Machines Brand for which offered Cartridge/Consumable is Suitable Kyocera Type of Cartridge/Consumable Toner Cartridge Color of the Ink/Toner Cyan Model Number of OEM's Printer/OEM's Multi Function Machine ECOSYS M5521cdn/P5021cdn, P5021cdw, ECOSYS M5521cdn/P5021cdn/P5021cdw, M5526cdw P5026cdw Model Number of OEM's Printer Cartridge/Consumable TK-5234C Model Number of cartridges Consumable offered by compatible manufacturer Not Applicable for Printer OEM Minimum Yield of the Replacement Cartridge/Consumable offered (Number of Pages) 2001 to 5000, 5001 to 10000, 10001 to 15000, 15001 to 20000, 20001 to 30000, 30001 to 40000, 40001 to 50000, 50001 to 70000, 70001 to 100000, 100001 to 500000, 500001 to 1000000, 1000001 to 1500000 Or higher Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 5 30 5/16 Toner Cartridges/Ink Cartridges/Consumables For Printers ( 5 pieces ) ( Under PAC ) Make kyocera Model tk-5234m Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) GENERIC Product Class of Cartridge OEM Name of the OEM/Compatible Manufacturer of Cartridge/Consumable Offered Kyocera Document Solutions India Private Limited Printer/Multifunction Machines Brand for which offered Cartridge/Consumable is Suitable Kyocera Type of Cartridge/Consumable Toner Cartridge Color of the Ink/Toner Magenta Model Number of OEM's Printer/OEM's Multi Function Machine ECOSYS M5521cdn/P5021cdn, P5021cdw, ECOSYS M5521cdn/P5021cdn/P5021cdw Model Number of OEM's Printer Cartridge/Consumable Kyocera TK-5234M Model Number of cartridges Consumable offered by compatible manufacturer Not Applicable for Printer OEM Minimum Yield of the Replacement Cartridge/Consumable offered (Number of Pages) 2001 to 5000, 5001 to 10000, 10001 to 15000, 15001 to 20000, 20001 to 30000, 30001 to 40000, 40001 to 50000, 50001 to 70000, 70001 to 100000, 100001 to 500000, 500001 to 1000000, 1000001 to 1500000 Or higher Consignees/Reporting Officer and Quantity 6/16 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 5 30 Toner Cartridges/Ink Cartridges/Consumables For Printers ( 5 pieces ) ( Under PAC ) Make kyocera Model tk-5234yusedinm5521cdnm5521cdwp5021cdnp5021w Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) GENERIC Product Class of Cartridge OEM Name of the OEM/Compatible Manufacturer of Cartridge/Consumable Offered Kyocera Document Solutions India Private Limited Printer/Multifunction Machines Brand for which offered Cartridge/Consumable is Suitable Kyocera Type of Cartridge/Consumable Toner Cartridge Color of the Ink/Toner Yellow Model Number of OEM's Printer/OEM's Multi Function Machine ECOSYS M5521cdn/P5021cdn, P5021cdw, ECOSYS M5521cdn/P5021cdn/P5021cdw, M5526cdw P5026cdw Model Number of OEM's Printer Cartridge/Consumable TK-5234Y Model Number of cartridges Consumable offered by compatible manufacturer Not Applicable for Printer OEM Minimum Yield of the Replacement Cartridge/Consumable offered (Number of Pages) 2001 to 5000, 5001 to 10000, 10001 to 15000, 15001 to 20000, 20001 to 30000, 30001 to 40000, 40001 to 50000, 50001 to 70000, 70001 to 100000, 100001 to 500000, 500001 to 1000000, 1000001 to 1500000 Or higher 7/16 Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 5 30 Special terms and conditions-Version:2 effective from 15-10-2024 for category Toner Cartridges Ink Cartridges/Consumables for Printers 1 . 1 . Category cover 2 classes of products namely OEM Cartridges and Compatible Cartridges 2 . For Parameter “Product Class of Cartridge”, “OEM” shall mean OEM for Printers only and not OEM for compatible cartridges. “Compatible” shall mean OEM of compatible cartridges only. 3 . OEM Cartridge covered is the cartridge having the brand of the respective printer OEM. Compatible Cartridge is the cartridge having the brand different than the respective printer brand or is manufactured by an entity other than OEM of the printer and is meant to fit in a particular printer for replacing OEM Cartridges. 4 . Printer OEMs who are given entry in the category and allowed Dashboards can upload catalogues of OEM Cartridges choosing product class option as OEM. Compatible OEMs are those entities who are vendor-assessed as per the special VA criteria applicable (Availble on GeM Website) by Vendor assessment agency of Government e marketplace. They are required to upload catalogues strictly in terms of the VA report and choosing product class option as compatible. Any deviations by OEMs/Compatible OEMs in appropriate product class option shall be viewed seriously and result in administrative actions against the respective seller. 5 . Against parameter Type of Replacement Cartridge/Consumable options applicable depending on the type as cartridge or consumbale is to be chosen while creating catalogue. For example if ink bottle or toner powder bottle are being uploaded the relevant option to be chosen as consumable and if toner catridge is being uploadedoption to be chosen as toner catridge 6 . Parameter model Number of OEM Printer/MFP etc., for which offered Cartridge/Consumable is suitable will guide the buyer in identifying the OEM or compatible cartridge to be procured for a specific printer . While creating catlogues sellers are to ensure that options are chosen according to the printer model for which offered catridge is suitable 7 . Model Number of cartridges/Consumable offered by compatible manufacturer indicate suitability of offered compatible cartridge with the OEM Cartridge model. For OEM also options covering their catridge model numbers are included against parameter Model number of OEM's Printer Cartridge/Consumable. This details along with printer model for which offered catridge/consumable is suitable shall help in identifying suitability of offered catridge/consumable by buyers for the printers/multifunction machines availble with them 8 . Both Printer OEMs who are uploading catalogues for their OEM cartridges as well as compatible OEMs are required to get the model/Part Nos included in drop-down options Compatible OEMs are required to get their model nos included in the drop-down options for selection during the creation of catalogues. They are required to submit a list of compatible model nos through the help desk for inclusion and shall create catalogues selecting their model nos only after inclusion creation of catalogues choosing incorrect model nos shall be viewed seriously and may result in removal of catalogues in addition to other administrative actions ..Compatible OEMs are also required o ensure 8/16 that they do not indicate their model no or part no in any manner resembling OEM model/Part No to avoid confusion to the buyers. 9 . Name of the OEM of Cartridge/Consumable offered shall indicate Printer OEM or name of compatible OEM as per VA report .Printer OEM or compatible OEM are to upload catalogues only choosing their name from drop down options After completion of VA sellers should approach GeM through help desk to get name included under options provided against this parameter. Dash board should be taken for creating catalogue only after including name. 10 . The buyers are requested to note that, when the OEM cartridges for different brands of printers are procured through bunch bids, they should opt for item-wise evaluation and not a total value-wise evaluation. This shall ensure that resellers of only one of the printer brands will also be able to participate in the bid. In the event of total value-wise evaluation only entities who are resellers for both the printers’ brands shall be able to participate. Further OEM and compatible catridges may not be bunched together. Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms. 2 . Generic Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %. 3 . Generic While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the screenshot of GST portal confirming payment of GST. 4 . Generic 1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of buyer. 2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior written consent of buyer. 3. The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally liable and responsible to buyer together with the assignee/sub-contractor, for and in respect of the due performance of the Contract and the Sellers obligations there under. 5 . Scope of Supply Scope of supply (Bid price to include all cost components) : Only supply of Goods 6 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses (A) Liquidated Damages Liquidated Damages as stipulated under Clause No.15 (iii) of GeM GTC shall not be applicable for the contr 9/16 act awarded against this Bid. (B) Additional Specification Parameters, if any Additional Specification Parameters as stipulated in the Bid Document must be complied by the Bidder/Sell er and supply may be made accordingly otherwise material will be liable for rejection. (C ) Clarifications/documents submitted by the bidder: (i) Clarifications/documents submitted during the representation time shall not be considered for evaluation and hence any clarifications/documents asked from the bidder may be submitted before evalua tion of bid only. (ii) The Representation window is opened 4/5 days from the date of publishing of bi d for seeking clarificati on towards technical/commercial in the existing bid, failing which buyer shall not be responsible for givin g response under the Bid. (iii) For post contract related clarification/queries bidder can contact buyer at buyer ID : consignee2.npc [email protected] ( contact No. 9413356554 ) (D) D ocuments related to Payment The seller shall submit Original invoice clearly marked for ‘Bill to’ and ‘Shipped to’, Annexure-F (copy enclo sed), Seller’s Bank details, E-invoice if applicable to seller based on his turnover, Test certificate (if applica ble) etc to the Paying Authority directly, immediately after dispatching material to the Consignee. As paym ent is to be released in a time bound manner, non-receipt of these document in time may lead to rejection of supplies.” (E) MSE Benefits Purchase preference will be given to MSEs as defined in Public Procurement Policy for Micro and Small Ent erprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises a nd its subsequent Orders/Notifications issued by concerned Ministry. Trades are excluded from the purvie w of Public Procurement Policy for Micro and Small Enterprises. Relevant documentary evidence in this reg ard shall be uploaded along with the bid. If L-1 is not an MSE and MSE Seller(s) has/have quoted price withi n L-1+15% of margin of purchase preference/price band defined in relevant policy, such Seller shall be giv en opportunity to match L-1 price and contract will be awarded for 25% of total QUANTITY. Benefits of Pub lic Procurement Policy shall be given to all eligible MSEs as stated under Point no.3 of FAQ dt. 25/03/2022, irrespective of product categories and the category they are registered under viz. Manufacturing or Servic e. (F) Following documents duly signed and sealed by the authorized representative of the Firm Company shall invariably be submitted by the bidder(s) alongwith the bid for evaluation of the offer :- (i) Annexure-‘F’ as per attached format for ‘Declaration Form for GST’.(Additional Doc.1) (ii) ‘Mandate Form’ at per attached format. .(Additional Doc.2) (iii) ‘Specifications Compliance Sheet’ to be filled by the bidder, if asked in the tender.(Additional Doc.3) (G) Undertaking/Compliance to Clause No. 29 of GeM GTC : Bidder is mandatorily required to submit an Undertaking as per attached Annexure-D on Company’s Letter Head along with offer. (H) Important Instructions to the Sellers : 10/16 In the event of purchase order, following instructions shall be followed by the Seller :- · Supply is to be made within stipulated delivery period as mentioned in the GeM Contract since Time i s the essence of Contract. However, in case of exceptional circumstances as mentioned in GeM GTC, reque st for extension in delivery period may be made by Seller on GeM portal . Simultaneously, an e-mail for ext ension in delivery period along with reason for delay in supply may be sent to e-mail ID of Buyer as mentio ned in the Contract which will be reviewed by the Competent Authority before issuing of the amendment o n GeM portal and hence repeated request on GeM portal for extension of delivery period may be avoided b y the Seller till acceptance of the buyer since the same gets auto cancelled by the system. · Invoice may be uploaded on GeM portal by the Seller immediately after dispatch of material otherwise system will not allow the Seller to upload the invoice on GeM portal after expiry of the delivery period as m entioned in the Contract. · Only Buyer GeM e-mail ID may be used by the Seller to send any communication with regard to GeM C ontract, if required. (I) R ight of Recourse under Civil Liability for Nuclear Damages Act 2010 & Rule 2011 thereof : Since requirement is for PHWR, NPCIL is the system designer and technology owner, being responsible for safety design of such installations in the this tender, NPCIL shall assume the role of Supplier in accordance with the explanation of term “Supplier” given in Rule 24 of the CLND Rules, 2011 and in the context of sect ion 17(a) and (b) of the CLND Act, 2010. I.0 BANNING OF BUSINESS DEALINGS BY NPCIL/BUYER NPCIL reserves the right to initiate Banning as per NPCIL’s Banning of business dealings as mentioned belo w and are independent of actions under GeM’s IM (Incident Management) Policy. The words banning, blacklisting, de-registered, debarred, holiday, suspension of business etc., means the s ame. The words NPCIL, Corporation, Buyer etc., means the same. The words Contractor, Bidder, Seller, Service Provider etc., means the same. I.1 Grounds for Banning The business dealing with the Contractor/Bidder/Seller/Service Provider shall be liable for banning, on acco unt of the reasons attributable to them, which shall include, but not limited to the following: I.1.1. Involvement in cartel formation during bidding. I.1.2. Baseless allegations by the bidder on NPCIL/Corporation/Buyer evaluation processes or officials. I.1.3. If any of the owner, proprietor or partner of the Contractor, is convicted by a court of law, during bidd ing process or currency of the contract, for offences involving corrupt and fraudulent practices including mi srepresentation of the facts, moral turpitude in relation to its business dealings with NPCIL. I.1.4. Malafide/unlawful acts/malpractices or improper conduct on part of Contractor based on the appro ved findings of the Investigation Agency. I.1.5. If the Contractor misuses the premises or facilities of the NPCIL forcefully occupies, tampers or dama ges the Company’s properties etc. or fails to vacate the properties/land/complex within reasonable time li mit as specified or even after receiving the notices from the department. 11/16 I.1.6. Security concerns for the assets of the Corporation and State. I.1.7. Submission of bids that contain false information or falsified documents or the concealment of such i nformation in the bids in order to influence the outcome of eligibility screening or/at any other stage of th e public bidding and execution. I.1.8. Withdrawal of a bid or refusal to accept an award of contract with the NPCIL without justifiable cause, after being adjudged as the successful bidder. I.1.9. Supply of Counterfeit items Breach of Code of Integrity. I.1.10. Bidder shall not act in contravention of the codes which includes I.1.10.1 Prohibition of a. Making offer, solicitation or acceptance of bribe, reward or gift or any material benefit, either directly or indirectly, in exchange for an unfair advantage in the procurement process or to otherwise influence the p rocurement process. b. Any omission or misrepresentation that may mislead or attempt to mislead so that financial or other be nefit may be obtained or an obligation avoided. c. Any conclusion, bid rigging or anticompetitive behavior that may impair the transparency, fairness and t he progress of the procurement process. d. Improper use of information provided by the procuring entity to the bidder with an intent to gain unfair advantage in the procurement process or for personal gain. e. Any financial or business transactions between the bidder and any official of the procuring entity related to tender or execution process of contract; which can affect the decision of the procuring entity directly or i ndirectly. f. Any coercion or any threat to impair or harm, directly or indirectly, any party or its property to influence the procurement process. g. Obstruction of any investigation or auditing of a procurement process. h. Making false declaration or providing false information for participation in tender process or to secure a contract; I.1.10.2 Disclosure of conflict of interest I.1.10.3 Disclosure by the bidder of any previous transgression made in respect of the provisions of above I.1.10.1 with any entity in any country during the last three years or of being debarred/banned by any oth er procuring entity. I.2 Show Cause Notice I.2.1 NPCIL will issue Show Cause Notice to the Contractor on noticing/receipt of a complaint of any irregul arities and/or misconduct and/or unethical practice as mentioned in clause no. 1.1. I.2.2 Upon receipt of Show cause notice, the Contractor is required to submit the reply to Show Cause Noti ce within 30 days of its receipt and no extension shall be given without justifiable reasons. The Contractor shall also be given an opportunity for oral hearing to present the case in person to NPCIL and the date of O ral Hearing will be indicated in the Show Cause Notice. Only the regular employees of Contractor will be pe rmitted to represent the Contractor during the Oral hearing, and no outsider shall be allowed to represent the Contractor on their behalf. 12/16 I.3 Period of Banning The period of banning shall be for a period of not exceeding 2 (two) years and not less than 6 (six) months as considered appropriate by NPCIL. I.4 Effect of Banning of Business Dealings by NPCIL In case NPCIL has banned the business dealing with the bidder/contractor, the following shall be the conse quences on issuance of the order of banning of business dealings with the bidder/contractor: I.4.1 No Contract of any kind whatsoever shall be placed to such banned firms including its allied firms afte r the issue of Banning Order by NPCIL. The Contractor including their allied firms shall not be allowed to pa rticipate in any tender enquiry till completion of Banning period. If the Contractor has already participated in tender process and the price bids are not opened, his techno-commercial bid will be rejected and price b id will be kept unopened. In cases, where the price bids of Contractor have been opened prior to the order of banning, such bids shall be rejected. However, incase such banned Contractor is Lowest (L1), next lowe st firm shall be considered as L1. Bid Security, if any, submitted by such banned Contractors shall be retur ned to the bidder. I.4.2 Contractors shall not be permitted to participate in any business process in any form or entity i.e., as an Associate/Collaborator/Joint Venture Partner/Consortium Partner of the Main Contractor even if the bann ing order is passed subsequent to opening of Part-I bids. I.4.3 Contractor shall not be allowed to participate as Sub-Vendor/sub-contractor in the tenders for contrac ts for works, service, supplies. I.4.4 Even if, the banned Contractor is an approved Sub-vendor under any Contract for such equipment/co mponent/service, the Main Contractor shall not be permitted to place Work order/Purchase order/Service C ontract on the banned Contractor as a sub-vendor after the date of banning even though the name of the p arty has been approved as a sub-vendor prior to the order of banning. I.4.5 The completion certificate issued to the contractor shall make a mention regarding banning during ex ecution of the contract. I.4.6 Banned bidders shall not be permitted to submit their bid. The bid submitted by the banned bidder sh all be summarily rejected. I.4.7 Contracts concluded before the issue of the banning order shall, not be affected by the banning order. I.4.8 Banning shall automatically be extended to all Allied firms of the Contractor. In case of Joint venture Consortium is banned all partners will also stand debarred for the period specified in the Banning Order. T he names of all partners should be clearly specified in the “Banning order”. I.4.9 Banning in any manner does not impact any other contractual or other legal rights of NPCIL. I.4.10 Banning under the provisions of Banning of Business Dealings of NPCIL is applicable only for NPCIL. I.5 Definition of Allied Firm : Allied Firm means all concerns which come within the sphere of effective influence of the banned firm. In d etermining this, the following factors shall be taken into consideration: a. Whether the management is common; b. Majority interest in the management is held by the partners or directors of banned/suspended firm; c. Substantial or majority shares are owned by the banned/suspended firm and by virtue of this it has a co 13/16 ntrolling voice; d. Directly or indirectly controls, or is controlled by or is under common control with another bidder; e. All successor firms will also be considered allied firms. (J) END USE CETIFICATE/VERIFICATION In case applicable, Bidder shall ensure that items to be imported to India do not have US origin component s above the de minims level. End use verification shall not be agreed by NPCIL in case of imports under an y circumstances. Further, the bidder/contractor shall make attempts to import raw materials/component s, if necessary, without insisting for “End User Certificate”. (K) DELIVERY SCHEDULE Date of delivery of the Stores stipulated in the Contract, shall be the essence of the Contract and delivery of Stores must be completed by the dates specified therein. Unless otherwise agreed, the Contract shall c ome into force from the date of issue of priced Purchase Order (Effective Date) and accordingly contractual delivery period shall be reckoned from that date for the purpose of fixing Contractual Delivery Date (CDD). (L) PRICE BREAK-UP In case of two part tenders, the Bidder shall take special care not to mix up any price details required to b e submitted against Part-II (Price bid) with Part-I (Technical & Commercial bid except price) and vice versa. Any violation of the above shall lead to summarily rejection of bid as being non-responsive. Wherever asked for, the bidder shall be required to submit complete break-up of “Total Price” as per presc ribed “Price Bid Break-up/SOQR” format in GeM Portal. In such case, the non-submission of the “Price Bid B reak-up/SOQR” or submission of irrelevant document or submission of No/Nil value against all items of the “Price Bid Break-up/SOQR” shall lead to rejection of such bids. However, in case No/Nil rate is quoted again st some of the item(s), the price of such item(s) shall be deemed to be zero. Addition/deletion/modification of any item in the prescribed “Price Bid Break-up/SOQR” format is not accep table unless authorized by Buyer and accordingly, bids with any unauthorized addition/deletion/modificatio n in the prescribed “Price Bid Break-up/SOQR” format shall be summarily rejected. Calculations for Price Bid Evaluation for Single Packet/Part Bids, Part-II (price bid) evaluation for Two Packe t/Part Bids and Contract Order Placement: For Price Bid Evaluation as per price evaluation criteria as well as for award of contract, “Total Price” quote d by Bidder in GeM Portal shall only be considered. The same “Total Price” shall only be considered for oth er purposes (i.e., negotiation, price matching in case of MSE/MII purchase preference/
Indian Army
LV7 TATA 000-545-0004J CHANGE OVER SWITCH, LV7 T- 815 443-311-809-109 WATER PROOF FOG HEAD LAMP 24V, LV7 T-815 347-222-046-000 BULB 24V H4-75-70W, LV7-T- 815 5140 012759 TOOL BAG, LV7-STLN VF 3040-72- 0201862 BALL JOINT
Across all 6,878 tenders published on this date. Statuses reflect the latest available updates; check each tender for its current deadline.
A tender can cover more than one state. Group counts may overlap.