Government Tenders Published on 19 May 2025

Hindustan Aeronautics Limited (hal)

Indian Space Research Organization

Ntpc Limited

Bharat Heavy Electricals Limited (bhel)

National Fertilizers Limited (nfl)

Steam trap size 0.5 inch, Steam trap size 0.75 inch, Steam trap size 1 inch, Steam trap size 3/4 inch

Armoured Vehicles Nigam Limited

GEAR GRIND WHEEL TY-1 CERAMIC DIA 220 MMX1, DIA 220MM X 180 MM X DIA 100 MM MODULE 2.25M

Indian Space Research Organization

Banana Sockets and Terminals (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6238561 Dated : 19-05-2025 Bid Document 1/5 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Office Of Dg (mss)

Indian Space Research Organization

Storage Box for Electronic Component (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6232985 Dated : 19-05-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

National Aluminium Company Limited, Bhubaneswar

Yantra India Limited

Munitions India Limited

Rourkela Steel Plant

BEARING, RLR, SL 182952

Armoured Vehicles Nigam Limited

Armoured Vehicles Nigam Limited

Hindustan Aeronautics Limited (hal)

MANUAL TEST JIG FOR DCU DETAILS AS PER THE ANNEXURE-1, CABLE LOOMS (2 MTRS) WITH CONNECTOR, CABLE LOOMS (4 MTRS) WITH CONNECTOR

Indian Army

LOCAL DUTY Sedan, OUTSTATION DUTY Sedan, LOCAL DUTY Premium SUV, OUTSTATION DUTY Premium SUV, OUTSTATION DUTY Premium SUV AC

Armoured Vehicles Nigam Limited

Hindustan Aeronautics Limited (hal)

Split Air Conditioner Including Green AC, Wall Mount Type (V2) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination ITC available to buyer Yes RCM Applicable Yes Bid Number ( ) : GEM/2025/B/6247142 Dated : 19-05-2025 Bid Document 1/9 Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority HAL (QC) Auto CRAC Days 30 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Armoured Vehicles Nigam Limited

TWIST DRILL, T. S, HSS M35 IS: 5103 14.0 MM, TWIST DRILL, T. S, HSS IS: 5103 24.0 MM

Hmt Machine Tools Limited

GRINDING WHEEL GRADE A60 L5 V10, GRINDING WHEEL GRADE A801 J5 V10, A, B, C

Indian Army

Plywood, T Face Veneer, French Polish, Teak Wood batten, Teak Wood beading, Teak face plastic, Teakwood beading, Teak wood beading, Fevicol, Looking mirror, Prelaminated Partical Board, Looking mirror of table dressing gents o, Gloves for polishing work, Chandras, Raw saina powder, Malmal cloth whith, Screw, Nails, Sand paper, Nails wire, Light Sensor control, Modular Switch, Modular Bell Push Switch, Two Module Fan Regulator, Two Module Socket, Altock GP Calcium baseds Clorine, Bleaching Powder, Alum, HT Selfbonding Tape, Motor with blade copper winding motor, PVC Waste Coupling, Stainless Steel Curtain rod, PVC Corrugated Waste Pipe, Door Stopper, PVC Flushing tank handle low lavel, SS Grating, Shower Rose, Brass spindle, CP Jet spray, Curtain rod, White Cement, PVC Floor Trap, CP Shower Rose, SS Soap Dish, PVC U Pipe 15mm, SS Continous piano hings, CP Waste Coupling, Pipe bends, Flush pipe, Nails 1, Water Tank, Plain Glass, Frosted Glass Bid Number ( ) : GEM/2025/B/6187279 Dated : 19-05-2025 Bid Document 1/56

Karnataka Postal Circle Department Of Posts

Panchayati Raj Department

Twister - Outdoor Gym Equipment (Q3), Shoulder Builder Arm Wheel - Outdoor Gym Equipment (Q3), Sit Up Board - Outdoor Gym Equipment (Q3), Surf Board - Outdoor Gym Equipment (Q3), Parallel Bar - Outdoor Gym Equipment (Q3), Leg Press - Outdoor Gym Equipments (Q3), Chest Press - Outdoor Gym Equipments (Q3), Air Walker/Stroller - Outdoor Gym Equipment (Q3)

Damodar Valley Corporation

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Power House Equipment, Contract for Overhauling of Hoists/Crane of TG & Aux. & Water Package Area of DSTPS, DVC, Andal.; As per SOW & ATC

Office Of Dg (mss)

SPLIT 1 CARBONIZATION DIE ASSEMBLY, SPLIT 2 CARBONIZATION DIE ASSEMBLY

Indian Navy

Hindustan Aeronautics Limited (hal)

Hindustan Aeronautics Limited (hal)

Camera for CCTV System (V3) (Q2), Video Recorder for CCTV System (V2) (Q2) MSE Exemption for Years of Experience and Turnover

Ntpc Limited

00010 M3400808019 COMPR, AIR: PORT COMPR, 270L, 46M3/MIN, 7KSC

Armoured Vehicles Nigam Limited

SHIFT UNIT FOR 2K300 GEAR BOX, PART NO: 4161.109. 202, ZF MAKE

Armoured Vehicles Nigam Limited

PUPPITAST/PIN DIAL TEST INDICATOR-MIN, READING= 0.01MM, MEASUEING RANGE= 0.8MM, DIAL= 27.5MM, EXPOSED

Hpcl Renewable And Green Energy Ltd

SUPPLY PORTA CABIN 30X10, SUPPLY PORTA CABIN 10X10, KANAUJ PORTA CABIN 30X10, KANAUJ PORTA CABIN 10X10

Nmdc Steel Limited

Garden Reach Ship Builders And Engineers Limited (grse)

Indian Institute Of Technology (iit)

Indian Army

TRANSPORT CHARGES FOR LOCAL CITIZENS, ADVERTISEMENT-PUBLICITY MATERIAL, MEDIA COVERAGE, REFRESHMENT, STATIONARY/PRINTING, MISC EXPENDITURE

Hindustan Aeronautics Limited (hal)

Indian Army

Grinding Wheel For Bench Grinder Size 150x25.91x25mm, Wire Brush Wheel For Bench Grinder Size 150x25.91x25mm, Grinding Wheel For Bench Grinder Size 200x25.91x25mm Black and Grey Colour, Wire Brush Wheel For Bench Grinder Size 200x25.91x25mm, Grinding Wheel For Bench Grinder Size 350x50x38.1mm Black and Grey Colour, Steel Wire Brush 12 Cm, Cutting Wheel 100x1.25x16 Mm A60 tbf 4 Inch, Cutting Wheel 125x1.25x16 Mm A60 tbf 5 Inch, Painting Brush 1 Inch, Painting Brush 2 Inch, Painting Brush 3 Inch, Painting Brush 4 Inch, Cleaning Brush 4 Inch, Cleaning Brush 2 Inch, Battery Cell SR 44 0 percentage Hg, AA Battery Cells, AAA Battery Cells, Tailors Marker Chalk, Grinding Wheel 5 Inch, Jigsaw Machine blade Multiple Size Set of 24 Nos, Cotton Tape 1 Inch in Roll, Insulation Sleeve Size 0, Insulation Sleeve Size 1, Insulation Sleeve Size 1.5, Insulation Sleeve Size 2, Insulation Sleeve Size 3, Insulation Sleeve 4 Size, Insulation Paper 2 Inch x 2 Inch, Motor Winding Tape, Writing Brush Round No 3, Writing Brush Round No 4, Writing Brush Round No 6, Writing Brush Round No 10, Writing Brush Round No 12, Writing Brush Round No 20, Writing Brush Flat 15, Writing Brush Flat 16, Writing Brush Flat 17, Writing Brush Flat 18, Hard Wire Brush for cleaning, Parting Cutting Wheel Size 355 x 3 x 25.4 mm, Wire Brush Wheel 5 Inch, Wire Brush Wheel 8 Inch, Painting Brush No 3 Flat, Painting Brush No 4 Flat, Painting Brush No 10 Flat, Painting Brush No 12 Flat, Plastic Wire Brush 1 Inch for Washing and Cleaning of Aggregates with K Oil, Plastic Wire Brush 2 Inch for Washing and Cleaning of Aggregates with K Oil, Plastic Wire Brush 3 Inch for Washing and Cleaning of Aggregates with K Oil, Hand Hacksaw Blade Single Side, Hand Hacksaw Blade Double Side, Hand Grinder Wheel Size 125x6.8x22.23 MM, Hand Grinder Cutting Wheel Size 125x1x22.23 MM, Flap Disc Size 4 Inch 100 MM Buffing Wheel for Hand Grinder, Alo Resin Cloth Mop for Flap Wheel HI Flex Size 150 x 25 mm Grit 60, Alo Resin Cloth Mop for Flap Wheel HI Flex Size 150 x 25 mm Grit 120, Alo Resin Cloth Mop Flap for Wheel HI Flex Size 150 x 25 mm Grit 220, Cumi Flex Unitised Wheel Dia 150 x 25 mm thickness 5 SUF, Canvas Buffing Wheel Stitched Size dia 6 Inch x 2 Inch thick, Red Rough Composition Bar, Steel Wire Hand Brush Size 5 Inch x 1 Inch, Brass Wire Hand Brush Size 4 Inch x 1 Inch, Soft Steel Wire Wheel Brush Size dia 4 Inch x 1 Inch thickness, Tool Grinding Wheel Green Gold Size 200x25x31.75 mm, Tool Grinding Wheel Black Rough Size 200x25x31.75 mm, Tool Grinding Wheel White, Size 150x16x12.70 mm, Tool Grinding Wheel Green, Size 150x16x12.70 mm, M seal, Teflon Tape, Alkaline Batteries 9 Volt, Soldering wire, Soldering Flux, Lithium Battery 1ZE AA 3 point 6V Bid Details 2/58

Armoured Vehicles Nigam Limited

SPECIAL INSERT FOR CUTTER NO; 402233-02 WIDIA DRAWING NO. KS/PROP/021/I, TN35M GRADE.

National Aluminium Company Limited, Bhubaneswar

Aluminium Sulphate, Non - Ferric as per IS 260 (Q3) MSE Exemption for Years of Experience and Turnover

Indian Army

Indraprastha Institute Of Information Technology (iiit)

Indian Army

Spices And Condiments - Coriander, Whole And Ground (V2) Conforming to IS 2443 (Q3), Spices and Condiments - Cloves, Whole and Ground as per IS 4404 (Q3), Spices and Condiments - Tamarind Concentrate (V2) as per IS 5955 (Q3), Cinnamon Whole (V2) as per IS 4811 (Q3), Mustard, Whole and Ground (V2) as per IS 2323 (Q4), Spices and Condiments - Turmeric Whole and Ground (V2) as per IS 3576 (Q3), Large Cardamom (Badi Elaichi) as per IS 13446 (Q4), Nutmeg (Q4), Bay Leaf (Q4), Fenugreek (Methi) as per IS 3795 (Q4), Cumin (Q4), Asafoetida (Hing) as per IS 7807 (Q4), Chilly as per IS 2322 (Q4), Black Pepper (Q4)

National Seeds Corporation Limited (nsc)

Chennai Petroleum Corporation Limited

C16A250033 5699994144 Complete Sealing System with installation. EQPT TAG NO: : 204G15A/B, 5699994704 MECHANICAL SEAL, COMMISSIONING SPARE EQPT TAG NO: 204G15AB, 5699994954 MECH SEAL, MANDATORY SPARE EPQT. TAG: 204G15AB

Nmdc Steel Limited

Indian Institute Of Technology (iit)

Group Personal Accident Insurance Service - Students; Permanent total disability, Permanent partial disability, Temporary disabilities

Nmdc Steel Limited

Bhilai Steel Plant

71511000082015, 71511000082016, 71511000082017, 715103000800009, 715110000800127, 715110000800128