Indian Railways E-Procurement System (IREPS) Tender Results

Design Supply & Installation of Dismounting System for Gear Case

Siemens Make SIMATIC S7-1500, CPU Bundle consisting of: CPU 1518-4 PN/DP MFP, MLFB: 6ES7518-4AX00-1AC0 (Successor and one to one replacement of MLFB 6ES7517-3AP00-0AB0)

INJ TERLIPRESSIN 1.0MG/10ML

Fabricated ATD bearing removal puller tool fitted

SET OF 'E' TYPE LED BASED MARKER

SET OF RUBBER SEAL, MODIFIED FOR ROOF TO CLW'S DRG. NO.- 05/4/44/145 (ALT.-2) COMPRISING OF-- (1) REF-1= 4 NOS. (2)REF-2= 2 NOS. (3) REF-3= 2 NOS. (4) REF-4= 2 NOS. FOR WAP4 & WAG7 LOCO. Shelf life of this item is 12 months.

COVER ACCESSORY DRIVE.

Set of Surge arresters

HIGH VOLTAGE CABLE ASSEMBLY

Hydroxypropyl Methylcellulose Ophthalmic Gel 0.3% w/w - 10g Tube

SET OF PNEUMATIC CREW FRIENDLY CAB FITTINGS

CKD make Pressure Regulator Valve (Model No.W2000-10-M1)

CUT OFF ANGLE COCK to RDSO Drg. No. WD - 88123-S-01. Alt 03. Spec: 02-ABR- 02 with Amend.No.4.

SET OF INSULATED SPACER FOR TEMPERATURE SENSOR ASSEMBLY OF WAP7/WAG9 LOCOMOTIVE

Fuse Auxiliary, 415/110 Volt along with base with micro switch

HSS PARALLEL SHANK DRILL BIT

Gear Case

Procurement of Plug Insulated 0.5 x 2.8

Modified Alternator Bracket for AC Bogie [Modified Alternator Bracket for AC Bogie frame (LH&RH) to Drg. No J&TD/CW/PER/SK-1474 alt-nil. Without item3 (Bush) COL-1 (RH)-1Nos. and COL-2 (LH) -01Nos .]

IOH KIT OF AIR DRYER (VAPORID SIL MAKE) CONSISTING OF 17 ITEMS AS PER ENCLOSE LIST.

4 layer insulator for brake blending resistor (BBR)

Electric insulating hand Gloves.

Condenser Bushing

Wiper Motor Assembly

Set of Cyl. Roller Bearing for TM 6FRA 6068 Consisting DE Side Bearing NU 2236 C4, ABB Prod No. 3EHM620747 P0256, NDE Side Bearing NJ 320 EC4 and Thrust Coller to ABB Prod No. 3EHM620747 P0340 & 3EHM620747 P0341 Make SKF or FAG Only.

Forked Collar Socket

Linezolid 600mg Tab

TABLET CINACALCET 30 MG

Tablet Azilsartan 40 MG

Brake Assembly

CLAMP BAR FOR CMC & PMC

Shot shield for CDLR section

Rib belt (All sizes)

3 Phase Over Current (FOL) + earth fault relay

Hex. Hd. Bolt M20 x 80-8.8 & Prevailing Torque Type Nut M20 with Punched Washer A-22, for Safety Wire Rope Drawing No.:- WTAC4-3-2-401 alt. (h) & (8), items- 22,23 &18

Cast Steel Bolster complete for BCNHL wagon

MEDICINES

ROOF LINE INSULATOR

Drilling Machine heavy duty Corded Brushed Electric Drill 660 Watt Make: Neutron/ RALLIWOLF/makita/bosch/dewalt/STANELY.

Procurement of Sealed lead acid battery,

Train Signal Register OPT-28

Traction Motor Drive

"O" ring for 120 KN / 140KN / 160 KN

POH KIT FOR LEVELING VALVE

Guide Column, Plasser Part No. WN153-82f7.1365-1 as per RDSO Drawing No. RDSO/TM/03/16 Rev-1 & RDSO Specification No. TM/HM/6/363 Rev-1.

ARA terminal block (small) PBT make to Drg. No. SA-23741A (Alt-4) or latest as per Specn. No. IRS:S-75/2006 (Rev.2) or latest.

Grooved Ball Bearing.

LAVATORY DOOR

BRAKE BEAM (OUTER)

Centering to RCF PL NO.33509487