Loading
Loading…
Loading…
2,14,908 results • Latest
ASD Relay card for Automatic smoke/fire and alarm system in LHB Coaches as per ADVANCE HITECH part No. AHT-ASD-109(Sub Part). Item to be procured from OEM/OEM authorized dealer only.
WBI-1-Board of Part No.FT0029675-100 for Faiveley make WSP system in LHB Coaches
SUPPLY & FITMENT OF SET OF (a) LAVATORY DOOR LOUVER FOR VANDE BHARAT COACHES
(FOR TEJAS) SUPPLY OF ONE PAIR OF HOLDING DEVICE
Bracket Fan 225 mm sweep, 110 V AC conforming to RDSO specification No. IS:6680-92 with annexure H (December2005) for RC fan issued by RDSO vide Lr. no. QE/6.5.1 dated 10.03.2006. The fan base, motor body and bracket shall conform to ICF Drg.No. ICF/SK-7-6-179 with elegant, compact, lightweight aluminium body, anti-corrosive and FRP blade. The fan shall have ball bearings at both the ends with SKF/NBF ball bearing. The guard shall be crashworthy design to Drg.No. ICF/SK 7-6-158 Col.II Alt. g. The overall diameter of the guard shall be suitably altered in accordance with the sweep of the fan. Fan should be completely powder coated. The goose neck bracket shall be of stainless steel with ON-OFF toggle switch and Wago type connector suitable for 2 pole connection. The weight of the fan shall not be more than 3 kgs.
1.5 SQ.MM,BLACK, Blue, Red & Yellow COLOUR, E-BEAM CABLE
Pneumatic Cylinder of Sliding Door for LHB coaches
Chair Angle Double complete
Sliding window lock assembly
Set of Polypropylene Pipe Clamp for LHB Bangladesh Non-Ac
Rubber guide profile with key for fixing side wall glass for WAG7 locos, Size- 2000mm each piece. Specification:- CLW drg no.-01/03/44/52 Alt.14 with latest Ref-6
ALPRAZOLAM 0.25 MG ORAL TABLET.
MOUNTING HARDWARE KIT FOR PULSE
Set of spare parts consisting of 04 items
PIPE HP CYLINDER TO AC,VALVE ASSY DRAIN 1/4,ORIFICE DIA 1.3, 1/4 BSP X 1/8 BSP M,Free End Cover,BUNTY TUBE UL RR20070 OF and NON RETURN VALVE 1/8 inches
MOLYGRAF-M-4 or Similar (Non-melting grease formulated from select poly dimethyl silicone fluids and inert silica thickener)
Supply of electrical insulating rubber mat.
Refilling of compressed ready mix oxygen cum argon gas cylinder of 47 ltr. capacity gas mixture composition should be 98% argon & 2% oxygen note : 1) refilling is to be done as and when required. howerver, refilling shall be done in a batch of Four cylinders. 2) batch wise test certificate of gas shall be provided along with every supply 3) empty cylinders to be collected from SSE/CR II/PL and return duly filled with Gas mixture composition should be 98% Argon & 2% oxygen at filling pressure of 130Kg/Cm2 to SSE/CR II/PL within 04 working days after intimation. 4) Transportation of cylinders either empty or full lies with supplier
Overhauling kits for 821 Vent valve KBI Pt. No. 785259 of Electric CCB System of 3 phase Loco. One Set Overhauling kit (KBI Kit No. XKI/KIT/01590) consisting of 15 items as per Annexure attached.
KIT FOR CONTROL RESERVOIR RETAINING VALVE AS PER FTRTIPL PART NO. 790017501. ONE SET CONSISTS OF 07 ITEMS (08 NOS.) AS PER ATTACHED ANNEXURE.
SET OF FASTENERS OF SUPPORTING DEVICE etc.
Helmet Heat and chemical resistant with rechargeable battery-operated mounted LED light as per annexure with ISI marked
Ready mixed Paint Zinc Chromate Primer
SEAL...O-RING TO BLW PART NO 16171044 ANDDRAWING NO 8085182
GASKET WATER PUMP MOUNTING AS PER EMD PART NO AND DRAWING No - 40040028.
TRIGLYCERIDE PER PACK (2X43ML)400 TESTS ( MAKE-SIEMENS)
LC-SC Patch Cord 10 Mtr Armoured simplex. MAKE: SYROTECH,DIGISOL,D-LINK OR SIMILAR
LC-SC Patch Cord 5 Mtr armoured simplex. MAKE: SYROTECH, DIGISOL, D-Link OR SIMILAR
SC-SC PATCH CORD 10 MTRS LENGTH ARMOURED SIMPLEX. MAKE: SYROTECH,DIGISOL,D-Link OR SIMILAR
Nozzle mixing type manual blowpipe for cutting with LPG as fuel gas and confirming to IS 7653-1975 or latest. Should have provision for preheat oxygen. Length of torch 450 mm with head angle 90 degree. Weight of torch - less than 1.5 kg. Cutting capacity up to 300 mm. One 3/64 and one 1/16 PNM nozzle to be provided with each blowpipe. Material for gas tubes and lever: stainless steel, for angle head: brass. Knobs and handle should be metallic. Lever should have latching provision. Make : ESAB or Messer or Ador only.
REFRESHMENT AND CAFETERIA ITEMS
TRANSOM PLATE FOR VVN (MILK VAN) AS PER DRG. NO.- SK NO- 1663/P-1 .
Analog outside Micrometer Gauge
Scale for Vernier/Dial type Caliper Display calipers
CCTV Network Video Recorder
Drain valve for FTRTIPL Make Compressor as per FTRTIPL Pt. No.-850113000
FLEXIBLE CONNECTION ON ROOF FOR DJ & HOM INSULATOR AS PER DRG.NO. ELW/BSL/2/F-97.032 ALT-2 REF-4.
PRESSURE SWITCH 5 H3 AS PER FTIL PART NU [PRESSURE SWITCH 5 H3 AS PER FTIL PART NUMBER 021001200 or SQUARED. D PT. NO. GAWM-5. OR SIMILAR.]
Portable Ramp for wheel chairs
Suspension Hanger pin
Supply of Card 24V DC for Earth Leakage Detector (ELD) as per RDSO Specification No. RDSO/SPN/256/2002 Suitable for ELD of make M/s Agarwal Electrosafe Works Pvt. Ltd. as per schedule of requirements
BRUSH HOLDER ASSEMBLY etc.
CLEVIS ASSEMBLY ESCORT DRAWING NO- SK-1657
Supply of PCC 3300 CARD CONTROL,