Loading
Loading…
Loading…
2,13,464 results • Latest
Supply of Adjustable Wrench with soft grip
10 TB Surveillance HARD DISK as per Specification attached; Make- TOSHIBA, Seagate or similar.
AMPLIFIER TRIGGER AND BANDPASS FILTER BOARD
EXTERNAL BAND PASS FILTER CARD
BLOWER FOR CAB HEATER
Enamel Synthetic, Exterior, Undercoating, Black.
All-in-One Systems
Supply of bracket light
Set of spring for double lock assembly in WAP4 & WAG 7 Locos
"SEAT NUMBERS WITH BRAILLE SCRIPT FOR LHB NON-AC CHAIR CAR COACHES AS PER RCF DRAWING NO. LJ64130, ALT. c, CONFORMING TO SPECIFICATION NO. ICF/MD/SPEC-253 ISSUE STATUS-01, REV.-00, AMD-02 WITH NOS. 1 TO 102 IN EACH SET."
Supply of LC-LC patch Cord.
CONDENSOR FAN MOTOR ,THERMALLY PROTECTED [CONDENSOR FAN MOTOR ,THERMALLY PROTECTED, SUITABLE FOR SINGLE PHASE 230V, AC, 50 Hz WITH BLADES, CLASS-B INSULATION FOR 5.0 TR FOR DUCTABLE AC FOR 5TR BLUE STAR MAKE, 250W, 920RPM, GE COMMERCIAL MOTORS TO CAT NO. A09C256T00540(DC256T-1084) OF REPUTED MAKE LIKE CROMPTON, ABB, BAJAJ ETC]
M.S. Snap Head Rivet Size 12 x 50 mm
Supply of mild steel mounting
SUPPLY OF SLIDING WINDOW LOCK
Pin Bracket to drg. no. MI008248
Paint Enamels Grass Green etc.
SPACER FOR TM SUPPORT PLATE(TYPE 6FRA6068)OF 3-PHASE LOCOS AS PER CLW DRG.NO.1209-01-418-004 ALT 1 ( ITEM TO BE PROCURED FROM CLW APPROVED SOURCES ONLY) as per Drg.No. CLW DRG.NO.1209-01-418-004 ALT 1
4 inch Duplex Air Pressure Gauge [0-14 Kg/cm2] marking MR and FP as per RDSO Drg. No- SK.DP.3512 Alt 3
Hot & Cold RO UV Water Purifier.
Insulator for LV Bushing & Earthing Bushing etc
1)Mattress- (Detailed specification attached) 2)CURTAIN ROD (Detailed specification attached) 3)CURTAIN CLOTH (DETAILED SPECIFICATION ATTACHED)
(AMI No.8.357) (2026-27) Syrup Ibuprofen 100mg and Paracetamol 162.5mg per 5mL in Bottle
Thermoplastic Water Hose etc.
Brake Valve complete System for Automatic smoke/fire and alarm system in LHB Coaches
Stud fitting 28 mm as per KBIL part no. [Stud fitting 28 mm as per KBIL part no. C217198]
Duct Air Dust bin to DLW Drg No. 10635393 Alt c and to DLW Part No 17270054 for HHP Diesel Locos. as per Drg.No. DLW Drg No. 10635393 Alt c
Aluminum window bars
Brush,Starter Motor to EMD part No.1852886.DLW part No.18420138.
Pre Mixed Black Magnetic Particle
ANTIBIOTIC IMPREGNATED KNEE CEMENT SPACER: TEMPORARY IMPLANTABLE SPACER DEVICE FOR USE IN INFECTED TOTAL KNEE ARTHROPLASTY, LOAD BEARING STRUCTURE BONE CEMENT WITH GENTAMYCIN ADDITIVE. IN FOUR DIFFERENT FEMORAL AND TIBIAL SIZES (SMALL, MEDIUM, LARGE, AND EXTRA LARGE, RESPECTIVELY OF 60,70,80, AND 90MM TIBIAL PLATEAU DIMENSIONS).THESE SHOULD BE AVAILABLE AS AND WHEN REQUIRED BASIS.
Keyboard specification: standard type, w
SET OF CLAMP OF AIR BRAKE PIPE LINE etc.
Traction center elastic joint to FIAT Drg. No. C53 973 REF BRED 8397, Rev. - 2R1, ( Firm's Drg. No.98.2.00119 B/PIRELLI ) Specn. No. T.S. 17.533.100.00, T.S. 17.617.100.02 and MDTS 148 Rev-1 & MDTS-122 Rev-3.
SET OF PCB BASED LED ARRANGEMENT FOR MR-FP, BC1-BC2 & BP GAUGES WITH OPERATING RANGE 24 V TO 110 V. EACH SET CONSISTS OF 03 ITEMS 03 NOS.
High angle perspex wedge 60 degree attac [High angle perspex wedge 60 degree attachment suitable for normal single crystal probe of 20 mm diameter and also suitable to diameter of curvature 185 mm ]
Annunciator system complete as per RCF s
Adhesive Rubber Solution
08 Port unmanaged non PoE layer 2 access Switch Make:Dlink,Digisol,Cisco,TP- link,or similar
Small Form-factor Plug-able [SFP] Fiber based to RJ-45 (10 /100 / 1000M) module Copper based Ethernet connection for converting optical output of switch to Ethernet & as per attached specs
1.POLYPROPYLENE PIPE CLAMP (FOR STAINLESS STEEL) AS PER DRAWING NO. ICF/STD-3-5-028, ITEM NO.- 4, SIZE 28 MM. 2.POLYPROPELENE PIPE CLAMP (FOR STAINLESS STEEL) AS PER DRAWING NO. ICF/STD-3-5-028, ITEM NO.- 5, SIZE - 1 1/2 inch 3.PIPE CLAMP FOR STAINLESS STEEL PIPE AS PER DRG NO. ICF/STD-3-5-028 ITEM NO-2 ALT-C .Suitable for stainless steel pipe 4.PIPE CLAMP 1/2 inch OD as per drawing no.: ICF/STD-3-5-028 Alt c item-01, Suitable for stainless steel pipe